油类：撇油，破乳，气浮，等等。
Oils: skimming, emulsion breaking, dissolved air flotation, etc.
采用共凝聚气浮破乳吸附法处理乳化废液。
Waste emulsion was treated by method of co-coagulation flotation and adsorption.
介绍了一种气浮转台无线测控系统设计方案。
A wireless measurement and control system on air-bearing turntable is introduced.
对气浮法处理煤矿井下排水进行了试验研究。
The experiments of mine wastewater of air floatation are presented.
将气浮这项分离新技术首次用于糖汁的提纯。
The new separating technology of floatation was firstly used in the purification of sug ar juice.
据此给出了气浮结构的各种特性参数的计算方法。
The following analysis methods about the property parameters of air-float structure are obtained.
提出的气浮采收动力学模型与实验数据拟合良好。
A dynamic harvesting model, which fits the experiment data quite well, is also presented.
混凝气浮和混凝沉淀是水和废水处理中常用的工艺。
The process of coagulation-air flotation and coagulation-sedimentation is often used in the treatment wastewater.
介绍了涡旋絮凝气浮池的工作原理及实际应用情况。
The working principles and practical application of a whirling flocculation and air floatation tank are introduced.
诱导气浮法是一种快速、高效的处理含油废水的方法。
Induced air floatation is fast and effective way for processing oily waste water.
本文介绍了高效气浮技术设备的原理、特点及应用实例。
This paper introduces the theory, characteristic and application of the high-efficiency floating device.
文章通过理论分析和试验研究探讨了气浮结构的运动特性。
Some kinetic properties of air float structures have been studied by theoretical and experimental methods.
其处理工艺为均质隔油-混凝沉降-气浮-生物接触氧化。
The techniques are as follows: homogeneous oil separation - flocculation precipitation - gas floatation - biological contact oxidation.
介绍了水解接触氧化气浮工艺在宠物食品加工废水中的应用。
The pet food processing wastewater is treated by hydrolysis contact oxidation air flotation process.
采用高效气浮-淹没式生物膜组合工艺处理牛仔布洗漂废水。
To chose floatation and submerged bio-film process for the jean washing and dyeing waste water treatment.
对结构气浮的静力和动力力学特性以及稳定性问题进行了研究。
The static and dynamic properties and stability of air floating structures have been studied.
生产的实践表明，糖浆气浮新技术可明显地提高绵白糖的质量；
The practical application results show that floating purification can obviously improve the quality of the soft white sugar.
笔者对气浮法和沉淀法处理煤泥水作循环用水的效果进行了比较。
An effect comparison between air flotation and sediment method for slime water closed circle use was conducted.
其处理工艺为均质隔油-混凝沉降-气浮-生物接触氧化。
The techniques are as follows : homogeneous oil separation - flocculation precipitation - gas floatation - biological contact oxidation.
气浮法是用于回收纤维素衍生物废水中纤维素的一种非常有效的方法。
Gas floatation process is a very effective method to reclaim the cellulose in wastewater, which produced by the technics of manufacturmg nitrolcell.
气浮池采用硫酸铝为混凝剂和30%的回流比，有效地提高了处理效率。
The air floatation treatment was improved effectively by use aluminum sulfate as coagulant with a recycling ratio of 30%.
基于气浮轴承方法，建立了3自由度空间机械臂反作用优化地面实验系统。
Based on air bearings, a ground experiment system for optimizing the 3-dof space manipulator reaction is set up.
空气静压导轨是空气静压止推轴承的一种，在直线气浮导轨中被广泛采用。
The aerostatic guide way is a sort of thrust bearing, and is applied to linear air guide way widely.
新型反应器采用蜂窝状断面结构，机械分离与气浮原理相结合的三相分离器。
BFCR has honeycomb formed cross section and three phase separator, and theory of the separator is mechanical separation and air flotation.
以AN-2为气浮剂，沉淀产物磷酸铵镁的气浮回收率可达到94.91%。
When AN - 2 is used as air-floating agent, the air-floating recovery rate reaches 94.91%.
研究了利用商用有限元软件FEMLAB进行气浮轴承静态性能分析的方法。
A new method based FEMLAB was developed to predict static performance of air bearings.
气浮法的效率主要取决于固体颗粒直径、气泡直径和固体颗粒表面的化学性质。
Solid particle removal efficiency is chiefly decided by solid particle size, bubble size and the chemical properties of the solid particle surface.
以气浮设备中的射流器设计为例，介绍了射流器的结构、工作原理和设计方法。
Chosen the jet eductor of air bearing equipment, paper introduced the structure, work elements and design method of jet educator.
结合气浮设备的工作原理，从使用效果这一角度介绍了几种气浮设备的应用情况。
Combining with the operational principle of air bearing equipment, the paper mainly talks about, from the aspect of use results, the applications of air bearing equipments.
采用静压主轴、静压导轨、气浮轴承等高新技术，对菲涅尔透镜模具进行精密加工。
Using new technologies of static pressure bearing, static pressure guide and gas bearing, the mold of Fresnel lenses mirror was precisely manufactured.
应用推荐