介绍了楔横轧制坯工艺及其模具设计。
The article has introduced the cross wedge rolling preforming technology and its die design.
轧件与轧辊的瞬时速比和楔横轧工艺参数之间存在着十分密切而复杂的联系。
In the rolling procedure of cross wedge rolling, the technological parameters and instantaneous rotational speed ratio of workpiece and roller have intimate and complicated relationship.
本文提出了基于智能方法的楔横轧模具CAD的总体思想,旨在解决模具设计的自动化问题。
In this paper, an idea of toward intelligent CAD system of cross wedge rolling dies is introduced.
利用上限原理和最小能量原理,获得了用楔横轧工艺成形阶梯轴类件时杆部拉断的条件。
With upper bound method and least energy principle, the conditions are established of drawing and breaking workpiece with cross wedge rolling technique to form axial symmetry spare parts.
该公式对空心件楔横轧工艺的工程应用具有一定的参考价值。
The recommended equation is worthy for practical engineering applications on cross wedge rolling of hollow parts.
分析了楔横轧偏心变形, 系统地研究了产生偏心变形的条件。
The eccentric deformation of a blank in the process of cross wedge rolling was analysed in this paper.
阐述了在路线纵、横坡较大条件下空心板及箱梁桥楔块的设置与计算。
Under the conditions of larger longitudinal and cross-fall of road line, the author describes the calculations about core slab and box beam bridge chock.
依据实验结果和回归方程,对影响楔横轧空心件壁厚变化的主要因素做了分析讨论。
According to the experimental results and the regressive equation, analysis for the main factors how to influences the wall thickness of hollow workpiece rolled by cross wedge rolling is presented.
利用有限元软件ANSYS/LS-DYNA,对楔横轧多楔成形等直径轴进行了数值模拟与分析。
Equal diameter axis formed in Multi-wedge cross wedge rolling(MCWR)was numerically simulated and analyzed utilizing the finite element method(FEM)software ANSYS/LS-DYNA.
楔横轧机滚动轴承为双列圆锥滚子轴承,直接承受轧机运行中产生的轧制力,是轧机关键零部件之一。
Roller bearings of cross wedge mill are double-rows taper roller bearings and one of the important parts on mill. It directly bears rolling force when mill works.
首先比较了传统的和虚拟的楔横轧模具加工方法,并提出了楔横轧模具虚拟加工系统VMS的体系结构。
In this paper, the traditional and virtual machining approaches of DCWR are compared first. Then, the framework of virtual machining system (VMS) of DCWR is discussed.
本文详细研究了不同旋向楔横轧成形螺旋面在不同坐标下的方程。
The equations of different helix in cross wedge rolling in different coordinates were studied in this paper.
研究结果为优化和设计汽车半轴楔横轧设备提供了有效的数值分析方法和理论依据。
The study provides effective numerical analysis method and theoretical basis for the design and optimization of automobile semi axle cross wedge rolling.
研究结果对深入进行楔横轧理论研究,提高其工艺水平,扩展其应用范围有重要作用。
The results have important role on further theoretical research, and improving the technical process and spreading area of application for cross wedge rolling.
介绍了油泵油嘴针阀体的楔横轧工艺试验,以及在试验中遇到的问题及解决方法。
Technological experimental research for cross wedge rolling technology of pin valve of oil pump has been introduced with problems and relevant solutions during the process.
从理论上阐明了设计楔横轧模具过渡段应遵循的准则。
The criterion that should be obeyed as designing the die transition of cross wedge rolling was expounded in theory.
本文通过DEFORM有限元软件理论建模,对三辊楔横轧整个轧制过程进行了模拟计算。
In this paper, the numerical simulation on the wholly rolling process of trio cross wedge rolling has been finished, by using finite element software DEFORM.
这些分析结果对于深入认识6061铝合金变形行为提供了理论上的支持,并为数值模拟6061铝合金的楔横轧三维变形提供理论基础。
The result provides theoretical base for numerical simulation of 6061 aluminium alloy in the process cross wedge rolling deformation of three dimensions.
提出了一种偏心轴类零件楔横轧成形新工艺,给出了楔横轧成形偏心轴类零件轧辊的辊型曲面。
A new methodology of cross wedge rolling of shaft parts with eccentric section was presented, and the roller profile surface of tools was provided.
在对楔入轧制过程分析的基础上,建立了辊式楔横轧楔入轧制接触面的数学模型。
Based on the analysis of the process of cross wedge rolling during wedge in, the geometry model of rolling area is established.
研究结果对于扩大楔横轧工艺的应用有实际意义,尤其是对于锻件制坯成形的应用,将起到良好的作用。
The research results will be significant for extending the engineering application of cross wedge rolling, especially for the application of forming blank for closed die forging.
楔横轧是实现少、无切削加工的新工艺。
Taper rolling, which can partially or fully replace metal cutting, is a modern technology.
采用该模型对二辊楔横轧成形工艺进行仿真计算,得出了轧后工件的温度场、变形场、高温奥氏体晶粒尺寸分布等。
Through simulation of the 2-roll cross wedge rolling (CWR), the temperature and strain fields, and the distribution of grain size and so on, were obtained.
研究结果对于进一步开发楔横轧工艺、扩大工程应用领域、提高工艺水平有重要作用。
The research results play an important role in extending the applying field and advancing the technical level of the process of cross we…
该研究拓宽了楔横轧加工界限,对大断面收缩率产品的开发有重要意义。
This study result widens the processing limit of cross wedge rolling and is of momentous significance to develop heavy section shrinkage products of cross wedge rolling.
通过计算机仿真设计和优化,提出了扳手生产的新的锻造加工工艺,该新工艺用楔横轧精确制坯实现了优化目标。
A new forging technology is proposed, in which computer simulative design and computer optimization are applied to exact preforge through transverse rolling.
楔横轧多楔同步轧制技术是一种先进的长轴类零件精密成形技术,它克服了上述两种生产方法的不足之处,优点独具。
Synchronous rolling with multi-wedge cross wedge rolling(MCWR) is an advanced technique in forming long axial parts, and it does not have disadvantages of the above two methods.
因此,研究楔横轧多楔轧制微观组织演变规律,控制产品的最终组织结构,具有重要的理论意义和工程价值。
Study on microstructure evolvement regularity of workpiece of MCWR to control final microstructure has great theoretical and practical significance.
因此,研究楔横轧多楔轧制微观组织演变规律,控制产品的最终组织结构,具有重要的理论意义和工程价值。
Study on microstructure evolvement regularity of workpiece of MCWR to control final microstructure has great theoretical and practical significance.
应用推荐