由于该模型只用一个参数来描述，所以极大地简化了整车性能的模拟计算。
As there is only one parameter used in the model, so the simulation calculation of motor vehicle performance is greatly simplified.
对于切削过程的有限元模拟分析，正确的简化模型不仅可以提高计算结果的精度，并且可以大大的减少计算的时间。
In finite element simulation of cutting course, correct predigested model not only may improve precision of calculated result, but also can smartly reduce calculating time.
使用两步化学反应模型对简化的CDE 模型做了二维数值模拟研究。
Two dimensional simplified model of CDE was simulated by two step chemical reaction model.
在数值模拟和室内离心机模型试验的基础上，提出了高填方涵洞顶部土压力简化计算方法。
The paper puts forward the simplified calculating method of soil stress of the culvert top on the foundation of numerical simulating and centrifuge modeling.
最后，用简化的对接动力学模型计算出一些模拟结果。
Finally, some simulation examples with the simplified docking model are presented.
在钢筋混凝土转动角软化桁架模型的基础上，推导出从应力到应变的简化计算方法来模拟高强钢筋混凝土墙板受力全过程。
Based on the softened truss model for reinforced concrete, a simplified calculation method is proposed to simulate the whole loading process of high strength reinforced concrete panels in this paper.
针对模拟整形手术中外表皮与模型分割问题，提出一种简化的基于活动窗的中轴提取方法。
In accordance with the outer skin and model segmentation issues in simulated plastic surgery, a simplified axis extraction method based on active window was proposed.
通过合理简化，提出了香茅油间歇精馏塔的数学模型。用计算机模拟，获得了较佳的设计及操作方案。
By rationally simplifying a mathematical model of batch rectification collum on citronella oil is presented. With computer simulation better designing and operating schemes are obtained.
利用ABAQUS软件的显式积分计算模块，建立了一种简化的旋压加工模拟计算模型。
With the ABAQUS explicit integral model, a simplified simulating model for the power spinning was presented.
针对粘性土壤提出了一个简化力学模型，数值模拟了具有一定粘性的土壤与波纹型推土板之间的作用力。
A simplified mechanical model of sticky soil with certain viscosity was proposed for simulating the force between the soil and corrugated bulldozing plates.
仿真结果表明：电子战cgf系统的构造及简化模型效果理想，能够满足指挥训练模拟系统的需求。
The simulation result shows that the framework of CGF in ew and the simplified model are perfect, and can meet the demand of Command Training simulation System.
对模拟结果的对称面变形的情况分析论证了模型简化的合理性和正确性。
The analysis of simulated result of the deformation of symmetrical plane proved that the simplified model is reasonable and feasible.
虽然在分子动力学模拟中采用了高度简化的界面模型，但对界面破坏过程的模拟，仍可以帮助人们获得结合材料界面破坏过程的规律性认识。
In molecular dynamics simulation, a quite simplified model was used, but the simulation for the process of interface fracture also helps to acquire some rules about bi-material interface fracture.
根据理论计算得到了法向压力分布的简化模型，并结合有限元数值模拟对多点压边圈上的压力传递问题进行了分析。
The simplified theoretical model of normal pressure was derived, and the pressure delivery principle of multi-point blank holder was analyzed with FE simulation.
对某闭气炮闩简化模型，将该方法的结果与有限元数值模拟的结果进行了对比，验证了所建模型和计算公式的合理性。
Simultaneously, the comparison of the results from the method developed in this paper to the FEM results for a simplified model of a practical instance shows the reasonability of the method.
问题简化及网格划分在数值模拟中合理的简化物理模型既能反应问题物理本质又能使模拟得以顺利实现。
Simplify the problem and divide the mesh In numerical simulation, proper simplification of the physical problem can make the simulation simple.
用三维流场计算软件，对空调用轴流风扇的内部流动特性进行了数值模拟计算，讨论了不同的简化模型对计算结果的影响。
Adopting fluent software, the inner flow of the axial flow fan in aircondition is simulated, the influence of different simplified models is discussed.
等效热容的引入不但提高了模型精度，且大大简化了模拟计算。
The introduction of equivalent heat capacity in the model not only makes the model better in accuracy but also simplifies the simulating calculation significantly.
数值模拟结果表明，对不适于简化为扭转摆的钻柱系统，采用基于钻柱扭转杆模型的新方法进行设计可以取得相对较好的减振效果。
Numerical simulation shows that the new method is more effective for the drill-string assembly unsuitable to be simplified as a torsion pendulum.
采用了平面管的线性有限元数学模型和1：4.4缩比的简化管束模拟体。
A planar tube mathematical model of linear FEM (finite element method) and simplified model tube bundle on the scale of 1:4. 4 are used in the study.
螺旋桨模型简化为一个激励盘，即一个无厚度可穿透的圆盘，以给定的圆盘拉力载荷，即压强差来模拟螺旋桨滑流的效果。
The N-S equations with adoption of an actuator disk model are used to simulate the effect of turbo-propeller slipstream on high-lift systems.
运用简化的硬球模型模拟垂直管道中的塞状流。
The phenomena of plug conveying in a vertical pipe have been simulated by using the simplified hard-sphere model.
基于简化的晶粒形状，建立了模拟晶粒生长形貌的二维数学物理模型。
On the basis of the simplified grain shape, the physical model and mathematical model for the simplified dendrite shape were established.
摩托车性能的计算机模拟是CAD系统中一个十分重要的基本组成部分，摩托车性能的计算机模拟模型大致可分为三类：简化的模型、详尽的模型及完善的模型。
Computer simulation of motorcycle is an important component of CAD system. The models of the said simulation are generally divided into: simplified model, detailed model and perfect model.
经室内试验验证，精度很高，是雨水管网水流模拟及其它简化模型评价的有效工具。
The laboratorial experiment demonstrates that it is a effective measure to assimilate the water flow in rain water network and to evaluate the simplified models of rain water pipeline.
将该模型与简化的生物降解模型相结合可得到填埋场室内次压缩沉降模拟试验的复合模型。
By combination of the compression model with a simplified biodegradation model, a composite model was obtained.
本文分别针对上述不同因素，建立了不同的简化模型，利用FLUENT做了数值模拟。
This paper according to the different factors and use the CFD software FLUENT established different simplified models.
本文分别针对上述不同因素，建立了不同的简化模型，利用FLUENT做了数值模拟。
This paper according to the different factors and use the CFD software FLUENT established different simplified models.
应用推荐