运用数值模拟分析方法，研究煤柱支承压力在底板的分布规律。
With numerical simulation method, the distribution law of coal pillar support pressure in the floor was studied.
此模拟分析方法可应用于其它类型的输入波型和不同形状的微粒。
This method of simulation analysis can be applied to the input waveforms of other type and microparticles of different shape.
本文阐述了地面水、地下水联合调度的动态模拟分析方法及其应用。
The analytic method of dynamic simulation of combined operation of the surface and subsurface water and its application are presented in this paper.
蒙特卡洛模拟分析方法有很强的适应性，问题的几何形状的复杂性对它的影响不大。
Monte Carlo simulation has a strong adaptability, which has been impacted little by the complex geometry.
本文简要介绍了家用电冰箱制冷系统启动过程的试验研究与动态模拟分析方法及其结果。
This paper briefly introduces the methods and results of experimental study and dynamic simulation of start-up process for household refrigerator.
利用数值模拟分析方法，模拟了通过调节加热温度促进GOI法蓝宝石晶体生长的过程。
Numerical analysis was used to simulate the process of sapphire crystal growth by modulating temperature.
因此，滑坡体的形成机制相当复杂，寻求可靠、有效的滑坡体理论计算与数值模拟分析方法是许多学者努力研究的方向。
The mechanism of slope stability is very complicated, it is thus essential to study the method of theoretical calculation and numerical simulation.
本文以大功率电子组件DC/DC电源变换器为例，提出了基于通用的大型有限元分析软件ANSYS进行热模拟分析方法，并利用实验结果对模拟结果进行了验证。
In the paper, a thermal simulation method has been described using ANSYS software based DC/DC power module. Experiment has been done to verify the result of the thermal simulation.
伴随着这个，又有了使用的数据分析新方法，例如，马尔科夫链，蒙特卡洛模拟这些大型计算机密集型算法。
Accompanying this have been new approaches to data analysis using, for example, Markov Chain Monte Carlo simulations that are hugely computer intensive.
这些成本预测方法是通过分析或者模拟的形式，从Palladio模型(PCM的实例)中计算出标准结果(例如反应时间)。
The approaches, by means of analyse or simulation, calculate metrics (e.g. response time) from Palladio models (instance of the PCM).
本部分向您介绍如何使用模拟来标识原有流程中的问题，并介绍如何使用模拟和动态分析方法将其与将来版本进行比较以显示改进之处。
This section shows how you can use simulation to identify problems with As-Is processes, and how to show improvement comparing them to the to-be version using simulation and dynamic analysis.
采用焊接热模拟技术和显微分析方法，研究了回火焊道热处理对X80级管线钢焊接热影响区韧性的影响规律。
The effects of tempering weld-pass treatment on toughness of HAZ of X80 pipeline steel were studied by the technique of welding thermal simulation and the method of microscope analysis.
对协同识别中的参数进行了深入的理论分析，并提出了一种基于模拟退火机制的参数优化方法；
We also abstractly analyze the parameters of synergetic recognition approach, and purpose a novel parameters optimization method based on simulated annealing mechanism.
分析了模拟电极法，提出了一种测量变压器线圈冲击分布的方法即不插铁测量。
The simulated electrode method is analyst and a method for ~measuring impulse voltage distribution of transformer windings without core is built.
采用理论分析、模拟实验和工程探测等方法，就覆岩主关键层位置对导水裂隙带高度的影响进行深入研究。
Theoretical analysis, simulation experiment and engineering exploration are adopted to study the impact of the location of primary key stratum on the evolution range of water flowing fracture.
最后结合数值模拟分析的方法，对模型试验的结果进行验证。
And combined with numerical simulation analysis, the result of the experiment on the model is validated.
用理论分析、数值模拟和实验测试的方法研究了自由锚杆和锚固锚杆中的波传播特性。
Characteristics of wave propagation in grouted rockbolt were investigated with numerical simulation, experimental measurement and theoretical analysis.
理论分析和计算机模拟结果表明：运用码变换的方法来产生回波抵消信号是可行的，这将有利于用数字方法来实现。
The theoretical analysis and the results of computer simulation showed that it is possible to build a cancelling signal by means of code transformation.
模拟采用瞬态分析方法，跟踪了在整个冲击过程中应力场的变化。
The change of stress field during the impact process was studied by transient analysis.
文章用系统工程的理论和方法，用系统模型和模拟的方法，分析系统内水资源的供给与需求。
Using system engineering theory and method, system model and simulation method, the paper analyses the conflict between supply and demand of water resources within the system.
热力系统分析研究的主要方法是数学模拟和综合优化。
Mathematical simulation and synthetical optimization are main methods of thermodynamic system.
在此基础上，分析比较当前过程系统的分析与模拟方法，根据锅炉热力系统的特点选择合适的过程分析模拟方法。
On the condition of it, choose an appropriate process analysis method for boiler thermal system, after comparing the present simulation methods of process-system.
然后提出了泥石流地区大段落定线方案风险分析的模拟方法和铁路泥石流二次灾害发生风险模拟的方法；
Then, two methods of risk assessment for the alignments in railway design and the disaster of overturning trains caused by debris flow are presented.
通过基因表达的大量数据，结合一定的分析和计算方法可以构建合适的基因网络拓扑结构模拟系统的行为。
The massive data of gene expression combined with fit algorithm can help scientists establish the topology of the interactions, by which the system behavior can be simulated.
本文探讨计算机模拟方法在泥石流地区铁道线路方案风险分析中的应用。
This paper investigates the application of computer simulation for risk assessment on the alignments in railway design in debris flow regions.
本文采用理论分析、数值模拟与实验相结合的方法对合成射流流动机理及推力向量控制中的应用进行研究。
In this paper, the flow mechanism and the applications of thrust vectoring using synthetic jet are studied in theory, numerical simulation and experiment.
本文介绍了双螺杆挤压机的模拟分析的方法。
This article introduces simulation analysis methods of twin-screw extruder.
采用计算机模拟的方法，分析了夹持点涨落对测量棉纤维长度的影响。
Computer simulation is put up to analyze the effect of randomly holding points on cotton length measurement.
针对分析铁路V型天窗对线路能力影响的问题，提出了模拟分析的方法。
The simulation analyzing method was put forward for the problem to analyze the influence of V form skylight on capacity of railways.
针对分析铁路V型天窗对线路能力影响的问题，提出了模拟分析的方法。
The simulation analyzing method was put forward for the problem to analyze the influence of V form skylight on capacity of railways.
应用推荐