Curtiss - Wright公司的移动控制部将在未来一年内从其设在挪威特隆赫姆的嵌入式计算设备中心提供该装备。
Curtiss-Wright's Motion Control segment will provide the equipment from its Embedded Computing facility in Trondheim, Norway, over the next year.
用于控制设备的计算机，也叫做嵌入式系统，它的历史几乎和计算机自身的历史一样长。
The computers used to control equipment, otherwise known as embedded systems, have been around for about as long as computers themselves.
如果使用此控制器只是为了监视嵌入式应用服务器(通常情况)，请将此控制器配置为仅接受来自“这台计算机”的请求是最好的方法。
If you use the controller solely to monitor the embedded application server (the typical case), configuring the controller to accept requests only from "this computer" is the best approach.
Curtiss - Wright公司的移动控制部负责提供军事应用上的嵌入式计算处理技术。
Curtiss-Wright's Motion Control segment provides embedded computing technology for military applications.
介绍了一种面向复杂电子学系统的基于ARM 920t的32位嵌入式计算控制装置的软硬件设计原理与实现方法。
This paper introduces the design schematic and implementation methods of ARM920T-based 32-bits embedded computing control device for complex electronics system.
嵌入式控制系统一般用于对系统响应时间要求较高的专用计算机控制系统。
There is a pretty strict limit of reliability, cost, volume and energy-consuming, embedded computer control system is applied for firm and responding circumstance.
本课题研究开发了基于DSP的SVC(动态静止型无功补偿)控制系统，是嵌入式计算机技术与电力电子技术结合的一个实例。
This topic research and develop SVC (Static Var Compensator) control system based on DSP, was the embeded system computer technology and electric power electronic technology integrate example.
该系统充分利用嵌入式计算机的特点，实现了实时控制，实时信息处理和实时故障检测的功能。
This system makes use of features of embedded computer and realizes functions of real time control, real-time information processing and real-time troubleshooting.
上位机采用基于PC104总线的嵌入式工业控制计算机，以实现数据的统计分析、参数设置、存储、显示、通信等功能；
The upper computer is based on the PC104 bus embedded industrial control computer to achieve the functions of statistical analysis, parameters setting, storing, displaying and communicating.
本文所研究的是嵌入式工业控制计算机的设计与应用。
This paper illustrates the design and application of embedded industrial control computer.
通过嵌入式计算机与两种单片机的配合就可实现全自动组织脱水机的整个控制系统。
Therefore, through the interaction of the single chip computer and embedded computer, we can realize the whole control system of automation-tissue-dehydrating machine.
PXI零槽控制器是PXI测试平台的核心控制部件，ETX嵌入式计算机模块是一种非常袖珍的高集成度的计算机系统。
PXI system controller module is the kernel of control components of PXI testing platform, and ETX embedded computer module is a very high integration of computer system in small size.
本文研究了利用ETX嵌入式计算机模块来设计PXI零槽控制器的方法，提出了总体方案，完成PXI触发总线的设计，并实现了具体的电路设计。
This paper studies the method of designing PXI system controller using ETX embedded computer module, presents the design solution and complete the circuit including the trigger bus.
该系统结合了计算机技术、网络技术和嵌入式技术，实现了对DVR的远程控制功能。
The system which combined computer, network and embedded technologies gives an effective remote control to DVR.
利用嵌入式方法，通过计算机控制系统对时间分辨测量系统实现实时的远程控制。
With the remote controlling system using the embedded method, the beam measurement system has been implemented successfully.
嵌入式计算机集成度高，功耗小，实时处理能力强，在工业控制领域应用广泛。
Embedded computer is widely used in industry control field due to the characteristic of high integration, low consumption and strong ability in real time processing.
以基于嵌入式计算机PC- 104的天线控制系统为例，从软件架构、内存操作、人机接口、性能优化等多方面阐述C语言嵌入式系统的编程技巧。
Taking antenna control system based on embedded computer PC-104 for example, are introduced, including software architecture, memory operation, HMI, performance optimization, etc.
本文研究了一种以嵌入式PC作为控制计算机的高性能位置伺服系统。
In this paper, a high performance digital servo-system based on an embedded PC is studied.
第一，基于双频毫米波辐射计的扫描要求，设计了基于PC计算机和嵌入式系统道的两维伺服驱动电路，完成了扫描控制、通信协议和伺服驱动控制的软件设计。
Firstly, a two-dimensional servo-control driver circuit, which consists of PC and an embedded system, is designed based on the scanning requirement of the dual frequency millimeter wave radiometer.
以dsp为核心的复杂计算和控制的嵌入式系统设计思路逐步成为电子设备工程师的首选。
So DSP is wildly used in aviation, industry control and science research. Electronic engineers more and more use DSP as core for complex calculating.
本文提出并开发一套由嵌入式计算机以及DSP电机控制器组成的现代控制及通信系统。
This paper figure out and development a modern controller and communication system which composed with Embedded Computer system and DSP control system.
在简单介绍可重构计算系统体系结构的基础上，通过一个嵌入式实时控制系统实例，给出了可重构计算系统的一种实现方法。
Firstly introduces system architectures of reconfigurable system, then presents an example of embedded real-time control application through which a methods for designing reconfigu…
该仪器以嵌入式计算机PCM3370E为控制和数据处理核心，实现对激光器、光子计数卡、门控电路工作时序的控制及能见度反演。
The meter adopts embedded computer PCM3370E as the system core for control and data processing, to realize laser, photon counter and gating circuit timing control and visibility inversion.
嵌入式控制系统本质上是计算机控制系统。
The essence of embedded control system is computer-controlled system.
VXI嵌入式计算机将一台标准计算机集成在零槽模块中，可以实现对VXI系统中的功能模块的控制，它具有体积小、速度高、电磁兼容性好等特点。
The VXI embedded computer combines a standard computer with a VXI 0 slot which can control the functional modules in the VXI system. It has small volume, high speed and excellent EMC characteristics.
VXI嵌入式计算机将一台标准计算机集成在零槽模块中，可以实现对VXI系统中的功能模块的控制，它具有体积小、速度高、电磁兼容性好等特点。
The VXI embedded computer combines a standard computer with a VXI 0 slot which can control the functional modules in the VXI system. It has small volume, high speed and excellent EMC characteristics.
应用推荐