对倾摆控制系统的界面设计、数据采集程序、数字滤波程序和网络接口软件设计进行了详尽的分析；
The design of interface program, data collection program, digital filter program and the interface program of network were described in detail in the paper.
根据铝电解生产的特点详细讨论了传输的数据约定协议，给出了CAN总线通信接口软件设计方案。
To be more specific, the detailed data transfer agreement and the interface software plan for CAN bus communication are discussed on the basis of aluminum reduction requirements.
本文着重介绍了评定教学信息卡格式的编写方法、光标阅读机与计算机的接口软件设计以及数据库设计等。
It also introduces the design way of format file of information card, the interface software between OMR and computer and the design way of database.
文中介绍了基于USB接口的温度检测系统的工作原理，详细叙述了该系统的硬件结构和软件设计。
The paper introduced the operating principle of the temperature measurement system based on USB interface, and described the hardware structures and software design of this system in detail.
介绍了以DSP为核心具有以太网接口的嵌入式系统的硬件电路组成和软件设计方法。
This paper introduces a method of hardware constitution and software design of embedded system containing Ethernet interface and adopting DSP as its core processor.
提出了计数接口电路的硬件和软件设计方法，并进行了电路调试。
The hardware and software design methods of the counter interface circuit were put forward. And the circuit debugging has been carried on.
详细阐述了系统的总体设计方案，给出了界面模块与89c51接口电路，最后介绍了软件设计方法及程序流程图。
This paper detailedly introduces the whole design scheme of the system, the circuit on interface module and 89c51, the method of the software design and program flow chart.
最后，主要介绍了液晶显示器在单片机控制系统中与80c 196kc的结合使用，其中包括硬件接口以及软件设计。
At last the mainly introduction is the using of LCD in combination with 80c196kc in single chip control system, including hardware interface and software design.
最后，主要介绍了液晶显示器在单片机控制系统中与80c 196kc的结合使用，其中包括硬件接口以及软件设计。
At last the main introduction is the using of LCD in combination with 80c196kc in single chip computer control system, including hardware interface and software design.
在讨论系统结构的基础上，着重说明实现实时数据交换的接口和软件设计的特点。
On the basis of discussion on system structure, it emphasizes on the interface and the software design features for realizing real time data exchange.
本文介绍了TP801组成的精密定位系统以及其接口电路和软件设计。
This article introduces the accurate positioning system with TP801 which include the interface circuit and the software design.
介绍了硬件和接口电路及软件设计。
The hardware and interface circuits and software design are described.
本文详细地阐述了智能温度控制仪的硬件组成、软件设计及相关接口电路。
The hardware and software of the Intelligent Temperature Control Meter and the design of relevant interface circuit are described in this paper.
文章给出了EIB通用接口硬件、软件设计过程。
The hardware and software designing process of EIB universal interface is described.
本文详细介绍了该终端的软件设计与开发，包括网络模块、语音处理模块以及主控和用户接口模块等。
The software design and development of this IP telephone is well introduced in this document including its network module, voice processing module, main control module and user interface module etc.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
最后给出了PXA250与无线模块的接口电路和软件设计。
Finally, it presents the interface between PXA250 and the wireless module as well as the software design.
本文描述了软件设计、接口电路设计以及抗干扰研究等。
This paper gives description of the software design, the interface circuit design and the study on antijamming, etc.
核心模块ETR186提供了软件设计的接口、存储资源以及嵌入式DOS操作系统。
The key part is the ETR186 module in hardware which provided the interface, memory space , and the embed DOS system for IMCU software design.
本文介绍一种微机“在线”系统的结构及功能、并对其硬件接口和软件设计作了讨论。
In this paper, the structure and performance of the microcomputer on-line system are described, the hardware card and software design are discussed.
控制器的系统软件设计分为人机接口程序和控制程序。
The software design of controller is divided into Man-machine interface program and control program.
提出了用8031单片机及相应接口电路来完成系统动态频率特性测试的方法，给出了硬件的电路原理图，介绍了软件设计。
A method for measuring the dynamic frequency characteristics of a system with 8031 single chip microcomputer was presented, the circuit diagram was given and the software designing was introduced.
详细介绍了CAN/LIN总线技术在灯控模块中的应用，完成了CAN和LIN的网关设计，并给出了CAN/LIN总线的硬件接口电路和软件设计思想。
This paper introduces the CAN/LIN bus' application in the light's control module, the design of the CAN/LIN gateway is finished, and the hardware interface circuit and the software idea are given.
文中介绍了ADS7811的功能和它与数字信号处理机的接口电路以及软件设计方法。
The function of ADS7811, interface circuit between ADS7811 and DSP (TMS320F206) and design of software are introduced in this paper.
然后基于层次化模块化的软件设计思想，制定了用户接口模块的总体实现方案，设计并实现了一些关键功能模块。
Then, based on the modular and top-down design method, the user interface is designed and some key functional modules are designed and implemented.
文中介绍其系统结构和工作原理，并对其中DSC电路及usb数据接口的硬件软件设计进行了重点讨论。
The system structure and working principle are introduced. And for emphasis, the DSC circuit and the design of USB interfaces software and hardware are mainly discussed.
提出一种基于usb的雷达接口电路设计方案，给出硬件电路设计、固件编程、应用软件设计等关键技术的解决方法。
A design scheme of radar interface based on USB technology is presented. Techniques of hardware circuit design, firmware programming and application software design are illustrated.
详细讨论DS1820温度传感器和单片机接口电路，软件设计以及在测控系统中的应用。
The application of the DS1820 digital temperature sensor in the measuring and controlling system and software design is discussed detailedly in the paper.
仪器能进行温度和重量的自动补偿，并具有掉电保护、自动查询故障功能。介绍了硬件和接口电路及软件设计。
Changes in temperature and weight of samples can be compensated automatically. The hardware and interface circuits and software design are described.
仪器能进行温度和重量的自动补偿，并具有掉电保护、自动查询故障功能。介绍了硬件和接口电路及软件设计。
Changes in temperature and weight of samples can be compensated automatically. The hardware and interface circuits and software design are described.
应用推荐