年复一年,开线者和攀爬者在Muir山谷以及其他岩场的一些仰角路线上留下了快挂。
Quickdraws have been left hanging on several overhanging routes in Muir Valley, as well as other climbing venues, over the years by developers and climbers.
随着使用年限的增加,氯丁橡胶会逐渐粘稠和老化,救生服因而容易撕裂、破洞和开线——在寒冷的北方海域,这种小破绽无疑是致命的。
Neoprene stiffens and deteriorates as it ages, becoming prone to RIPS, holes and split seams-any of which can be fatal in frigid northern seas.
打保护点,清理岩壁,标注线路,这些开线的工作都是我热衷去做的事情。
I'm way more motivated to send a route that I've bolted , cleaned and figured out the moves on.
螺旋转子是转子流量仪表中的心脏零部件,其截面形状一般由渐开线和摆线组合而成。
Helical rotor is the most important part of rotor flow meter, and its section shape is normally formed by involute and cycloid.
变位齿轮可以有效突破标准渐开线齿轮存在的使用局限性,但在某些情况下必须采用专门设计的刀具加工。
Modified gear can break through the limit of spur gear in using. But modified gear must be manufactured with special design tools in some conditions.
发明了渐开线环形齿球齿轮机构。
用摆线对渐开线齿轮齿形进行修形。
花键的键齿的齿形为渐开线形式的花键。
本文以标准渐开线直齿圆柱齿轮作为研究对象。
The standard involute cylinder gear is studied in this paper.
最后给出了渐开线齿轮传动设计的计算结果实例。
At last, the result of the involute gear driving design is described.
介绍了渐开线直齿内齿轮插齿刀的优化设计方法。
The optimum design method of involute internal gear slotting cutter is introduced.
渐开线齿廓根切现象是齿轮传动中一个重要的问题。
Undercutting phenomenon is an important problem in gear transmission.
提出了任意转角位置的渐开线齿轮齿廓的参数方程。
The parameter equation of involute tooth profile on any angular position is presented.
内啮合齿轮泵有两种齿形即:渐开线齿形和摆线齿形。
Internal gear pump has two kinds of tooth profile namely: involute profile and cycloidal tooth profile.
指出了渐开线螺旋花键轴几何尺寸设计时应注意的问题。
The points for attention in designing the serration axle are pointed out.
但是如果你开始找到的线头就是好的,解开线团会更容易。
But if your first pulls are good ones, the untangling becomes easier with each move.
并以齿轮渐开线轮廓的数控加工编程为例说明了它的应用。
This article illustrates its application by the NC programming of gear involutes profile.
渐开线花键滚轧轮的设计是渐开线花键冷滚轧的关键技术。
The roller design is the key point for the cold rolling technology.
结果表明,复合齿形齿轮比渐开线齿形齿轮具有更高的弯曲强度。
The results are compared to those of the standard involute gear and proof that the bending strength of the composite profile tooth is higher than that of involute one.
介绍了平齿根齿侧配合英制渐开线花键计算、测量的基本公式及方法。
This paper introduces calculation and measurement of BRITISH Standard Involute splines.
介绍了用圆弧代替渐开线时的计算方法及其在工具制造中的应用实例。
This paper describes the calculation method in substituting of circular-arc for. involute with some examples applied in tool manufacturing.
为解决渐开线齿轮的精确造型问题,提出了齿廓渐开线曲线的计算公式。
To model involute gears accurately, a formula for calculating the involute curve of gear profile is presented.
根据渐开线球齿轮的仿形加工原理,设计一种具有渐开线齿廓的指状铣刀。
According to the principle of profiling machining of involute spherical gears, this paper designs the accurate involute profile curve of its finger milling-cutter.
根据渐开线齿轮的原理和渐开线的基本性质,介绍渐开线齿轮齿廓的形成。
On the base of principle of involute gear and its property, the formation of tooth surface are introduced.
在ANSYS软件中建立了标准渐开线齿轮与修形齿轮的动力接触有限元模型。
The dynamic contact finite element models of standard involute gear and modification gear are established in the software of ANSYS.
偏心渐开线齿轮传动设计的纯滚动模型、等转角模型和等分模型存在模型误差。
The pure rolling model, equal turning Angle model and bisection model for the design of eccentric involutes gears transmission have model error.
偏心渐开线齿轮传动设计的纯滚动模型、等转角模型和等分模型存在模型误差。
The pure rolling model, equal turning Angle model and bisection model for the design of eccentric involutes gears transmission have model error.
应用推荐