• 这个机器像个高速旋转中开槽的黑胶唱片,别看它又大又厚,却能清除水面上90%的油,运作时还不会漏油。

    The machine looks like a giant, thick, grooved vinyl record spinning at high speed to capture nearly 90 percent of the oil on the waters.

    youdao

  • 采用磁路开槽的方法,理论计算并设计了非对称磁路。

    The unsymmetrical magnetic circuit is designed by means of slotting.

    youdao

  • 针对棒、管料开槽的问题,提出了一种新型全自动开槽机。

    In allusion to grooving on bar materials and tubular goods, we developed a new kind of fully automatic grooving machine.

    youdao

  • 通过改变槽的个数和深度,得到同轴波导内开槽的优化参数。

    The parameters like the number and the depth of the inner slotted are optimized.

    youdao

  • 在本章的最后,采用寄生条带和贴片开槽的方法,实现了天线的双阻带特性。

    Finally in this chapter, the parasitical strip and the folded slot have been used to implement the dual band-notched characteristic.

    youdao

  • 这样,开槽的锚杆就可以在成锥模内成锥。

    In this way, the grooving anchor rods can taper in the tapering die set.

    youdao

  • 最后用间断磨削的原理,对砂轮开槽的作用,以及它对砂轮性能的影响进行了分析。

    Based on the analysis of discontinuous grinding, the effect of the grooves and their influence on the characteristics of the wheel are discussed.

    youdao

  • 首先对开槽砂轮的断续磨削进行了理论分析,概述了砂轮内冷却方法及新研制的内冷却装置。

    Making a theoretical analysis to the intermittent grinding with a slotted wheel, the built-in cooling for the slotted wheel and the newly-developed cooling system are described.

    youdao

  • 该文根据开槽管状药的装药结构特点,建立两相流内弹道理论模型。

    According to the characteristics of charge structure with slotted stick-propellant bundles, two-phase flow interior ballistic models are established in this paper.

    youdao

  • 与普通灌孔砌块砌体相比,开槽砌块灌孔砌体的受力性能更接近实际工程。

    Compared to ordinary grouted masonry, the mechanical properties of the grouted slotted block masonry were more realistic.

    youdao

  • 铁路运输设备。带开槽螺纹端头的无孔轴。开槽螺纹端头。

    Railway transport equipment. unbored axles with grooved screw - ends. grooved screw - ends.

    youdao

  • 在分析开槽砂轮磨削温升特点的基础上建立了新的开槽砂轮磨削温度数学模型。

    A thermal model of slotted-wheel grinding is developed on the basis of temperature raising analysis.

    youdao

  • 本文通过3组9个抗压试件,了解开槽砌块灌孔砌体的受压开裂荷载、极限承载力、破坏形态和变形能力。

    In this paper, 9 compressive specimens of 3 groups were tested to investigate the cracking resistant load, ultimate load, failure modes and deformation capacity of the grouted slotted block masonry.

    youdao

  • 介绍了开槽垫板施工工艺的特点,并利用有限元法和断裂力学原理对应用开槽垫板的高层钢框架节点的脆断性能进行了分析。

    The paper introduces characteristics of grooved backup bar and analyses the performance of brittle fracture of steel frame connections using grooved backup bars.

    youdao

  • 开槽测量线是一种常用的多功能微波测量设备。

    Slotted line is a common multi functional microwave measurement device.

    youdao

  • 在电机设计时,可以十分简捷的进行开槽计算。

    The slotting calculation of motor in design can be carried out simply and directly.

    youdao

  • 当开槽尺寸较大时,粘结剂薄弱层主应力的最大值出现在FRP—粘结剂界面处。

    While the slotting dimension is bigger, agglomerant weak tier of hosts strain maximum value appears in FRP agglomerant interface place.

    youdao

  • 分析了弹性变形、表面粗糙度对润滑性能的影响,并提出了开槽环的设想。

    We analyse the influence of the elastic deformation and the surface roughness for lubricating characteristics and give a thought of cutting groove in piston ring.

    youdao

  • 主要针对装置中实验研究所需的特殊工作电极——开槽CBN砂轮,论述其在新方法中在线修整的原理及其优越性,并进行了研究设计和分析选择。

    We also study the slot CBN emery wheel, which is a special work electrode required by the technique, and explains its principle for in-process dressing.

    youdao

  • 开槽模具由具有形状相同的冲头刃、槽刃组成。

    The grooving die set is composed of a punch edge and a groove edge which have the same shape.

    youdao

  • 结果说明:沟槽位于谐振腔中间时,开槽及其尺寸对电磁场的对称性没有影响,但对电磁场的大小有影响。

    The result of numerical simulation is as follows: 1 the groove located at the middle almost does not change the symmetric distribution of electromagnetic fields, but affects the magnitudes.

    youdao

  • 结合实际工程,提出了开槽设暗梁的楼板加固方法,避免了全部拆除重建。

    The strengthening method of digging groove and increasing hidden beam is proposed by combining an actual project, which avoids all of demolition and restitution.

    youdao

  • 整机印刷版辊的周相、开槽相位电动调整。

    Electric adjustment phase and slotting phase of whole machine printing roller.

    youdao

  • 提出了一种大尺寸长条形超声塑焊开槽焊头的设计方法,并对其进行了实验验证。

    A new design method for large cross-section blade-like ultrasonic plastic welding horns with slots is pre-sented, and relative experiments have been done to validate this method.

    youdao

  • 研究结果表明:该方法能解决闭式整体叶盘通道插铣区域划分和直纹包络面生成问题,可有效实现闭式整体叶盘的五坐标开槽粗加工。

    The results show that the channel region division and the ruled envelope surface generating can be solved by this approach, and the slot plunge milling of closed blisk can be achieved effectively.

    youdao

  • 研究结果表明:该方法能解决闭式整体叶盘通道插铣区域划分和直纹包络面生成问题,可有效实现闭式整体叶盘的五坐标开槽粗加工。

    The results show that the channel region division and the ruled envelope surface generating can be solved by this approach, and the slot plunge milling of closed blisk can be achieved effectively.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定