静载试验包括静挠度及静应变试验。
The static load tests include: static deviation test and static strain test.
进行了花生、 大豆、芝麻、亚麻籽双面渗流冷榨的应力应变试验。
The experiments of stress-strain of oil plant by uniaxial cold pressing under double surface for flow of fluids through a porous medium were carried out.
结合压缩应力—应变试验曲线特征与模型特性提出了模型参数的数值确定方法。
The method for defining and determining the parameters of the model was proposed by combining the testing curves of stress versus strain with the model characteristics.
用不同的简单应力状态下的应力-应变试验曲线，可以得到不同的广义等效应力-应变关系。
Using experimental stress-strain curves in various simple stress states, generalized effective stress-strain formulae may be derived correspondingly in various forms.
垫层材料应力应变试验可以了解不同材料的变化特征，分析在各自的应力区间中的应变范围。
Characteristics of different material obtained from stress versus strain cure of cushion material are to analyze strain scopes at the respective stress ranges.
应用大型平面应变仪，进行了灰岩及细砂岩两种堆石的风干料及饱和固结排水平面应变试验。
The rockfill materials of limestone and fine sandstone were tested by large scale plane strain apparatus in air dry and saturated state respectively.
基于有限变形理论和中井的下负荷面本构关系模型，研究了平面应变试验中黏土试样变形的局部化问题。
The finite deformation theory and the Nakai's sub-loading constitutive model are used to investigate shear band localization in plane strain model tests.
高应变试验模拟计算结果与静载结果的不同，与其测试分析中采用的桩身材料和土阻力的数学模型有关。
These errors are relative with the mathematical model about pile shaft concrete and soil resistance in high strain testing.
根据岩石的全应力应变试验，结合现场实际观测数据，对以应变为指标的岩梁断裂步距表达式做了初步验证。
According to the total stress-strain tests, the expression of caving step length of roof is validated combining with the observed data.
该方法可用于电压表试验中应力-应变关系的确定。
It could be used to determine stress-strain relation in oedometer test.
最佳答案之间的关系应力和应变在一个特定的物质决心通过拉伸试验。
The relationship between stress and strain in a particular material is determined by means of a tensile test.
根据试验结果与分析结果的统计分析，提出锈蚀钢筋的应力与应变关系。
The relationship of stress and strain of corroded steel bar based on the results of testing and analysis is presented.
试验结果表明，焊缝金属具有比较好的塑性变形能力，焊缝的损伤值与材料的累积塑性应变呈线性关系。
The experimental results showed that weld metal had enough plastic deformation capacity, and its damage value was linear with the cumulative plastic strain.
该方法以测量的应变值为基础，由拟合的曲线方程计算接头载荷，并与试验时施加的总载荷对比。
In this method, based on the measured strain values, the joint load is calculated by the fitted curve equation and compared with the total load applied during test.
利用有关文献试验得到的受拉区纵筋应力应变关系、布置方式等，推导出建议的设计取值公式。
According to the stress-strain relation and disposal mode of steel in the tensional region of section from the experimental results of other papers, the design formula is concluded.
万能拉力试验机可剖析整个测验的成果，例如伸长量、应力、应变、损坏值、平均值等。
Universal tensile testing machine can analyze the test results, such as elongation, average value, the stress, strain and damage, etc.
采用等温恒应变速率压缩试验对7A60超高强度铝合金的流动应力进行了研究。
The flow stress of 7A60 ultra high strength aluminum alloy was studied by isothermal compress test at constant strain rate.
经单桩载荷试验和低应变桩身完整性检测，施工达到了令人满意的效果。
By the testing of single pile loading experiment and integrity of low strain pile, the construction reached a satisfied result.
在钢筋混凝土双悬臂梁试验系统中，应变、挠度以及荷载是其主要的测试内容。
In test system of reinforced concrete double cantilever beams, strain, deflection and load were principal experimental contents.
通过室内试验，对水泥改良土的物理性质、应力-应变关系、强度特性、压缩特性进行了研究。
Based on indoor tests, the physical properties, stress-strain relationship, intensity behaviors and compressibility of the modified soil with cement are studied in the paper.
介绍东海大桥部分PHC试桩的高应变动测、竖向静载和水平荷载试验情况。
The high strain dynamic load tests, vertical static load tests and horizontal load tests for part of PHC trial piles of East China Sea Bridge are described.
针对位移模态参数对结构损伤欠敏感，应用应变模态试验技术诊断结构损伤位置和程度。
Strain modal test is applied to diagnosing the position and degree of structural damage, in consideration of the displacement modal parameters being insensitive to damage.
介绍了计算法测量电阻应变的原理及试验，着重分析了试验结果，验证了测量原理。
The principle of measurement of resistance strain with calculating is introduced. An experiment is conducted to verify it and analysis on the test validates it.
提出并完成了通过实心圆轴扭转试验建立大应变本构关系的方法。
How to establish large strain constitutive relationship by a torsion test with solid circular shafts is proposed in the article.
大型固结试验所获得的参数，是坝基应力应变分析的重要数据，而此项试验研究工作，在东北地区尚未广泛开展。
The data from a large - scale consolidation test are important for the stress and strain analysis of a dam foundation.
介绍概率应变疲劳试验法、评价模型和损伤随机演化机制方面的新进展。
New advances are introduced in fatigue test method, assessment curves, and fatigue damage mechanism dealing the strain-based fatigue reliability theories and methods.
对6063铝合金试样在不同应力三轴度和不同应变率下进行拉伸试验，得到了该合金在这两种情况下的力学性能。
The specimens of 6063 aluminum alloy are tensioned under different stress triaxiality and different strain rates, the mechanical properties of 6063 aluminum alloy can be drawn.
对6063铝合金试样在不同应力三轴度和不同应变率下进行拉伸试验，得到了该合金在这两种情况下的力学性能。
The specimens of 6063 aluminum alloy are tensioned under different stress triaxiality and different strain rates, the mechanical properties of 6063 aluminum alloy can be drawn.
应用推荐