分别利用恒温箱和悬臂梁完成了系统温度灵敏度和应变灵敏度的实验标定。
The sensitivities of temperature and strain are calibrated by calorstat and cantilever beam separately.
最后，利用实验标定的方法对理论分析结果进行了验证。
Finally, the analyzed theory result was verified by the experimental calibration method.
并通过实验标定ASE光源谱特性解调应变灵敏度系数。
The strain sensitivity was demarcated by experiment using spectrum character of ASE demodulation.
最后通过实验标定了钢筋腐蚀率与光栅波长位移的关系。
Finally the relationship between corrosion rate and shift in center wavelength was calibrated by experiment.
在北京同步辐射源上实验标定了这些光栅的相对衍射效率。
Relative diffraction efficiencies for these gratings have been calibrated on synchrotron radiation source.
这种方法克服了采用实验标定的缺点，具有较大的实用价值。
The practical value of the method given in this paper is obvious, as it avoids the shortcomings brought by the use of experiment calibration.
通过引入一个当量应变片，遵照标准应变片的标定规定，本文设计了实用有效的实验标定步骤。
Following the calibration of standard strain sensors, effective and practical experimental processes were designed by the introduction of an equivalent strain sensor.
经过实验已验证了标定方案设计以及数据处理算法的可行性。
Both the design of the calibration scheme and the feasibility of the data processing algorithm are identified through experiments.
根据动态标定实验数据，分析了负载变化对腕力传感器动态特性的影响。
The loading effect on dynamic characteristic of wrist force sensor is investigated in accordance with the dynamic calibrating experimental data.
实验结果表明，虚拟环境标定系统达到了较高的定位精度，可以满足遥控焊接过程中局部自主焊接准备工作的需要。
The experimental results show that the system can obtain a high localization precision to meet the requirements of preparation for locally autonomous welding during remote welding process.
通过对测力仪做标定，分析标定结果，并分析实验误差给出了软件系统的可靠性。
By way of doing the demarcation to surveying the power apparatus, the result is demarcated in the analysis, and analyses the experimental error and has given out the reliability of software system.
本文简要介绍了所研制的红外辐射式体温计的构成及标定实验方法；
The formation of infrared radiation human body thermometer and the method of calibration experiment are introduced.
在研究中，利用BP神经网络理论，提出并建立了按色相角范围对实验数据分类的打印机标定模型。
In the research, based on BP neural network theory, a printer calibration model is provided according to sorting experiment data by hue Angle range.
协助分析员确保做好研究中心实验设备的维护和标定。
Ensuring the maintenance and calibration of laboratory equipments under the research centre in collaboration with the analysis staff.
通过对该系统的标定实验表明，实际位移与所测得的位移呈线性关系。
Calibration tests on the system show there is a linear relationship between the actual displacement and the measured displacement.
通过动态标定实验，得到不同幅值的阶跃输入、输出数据。
Through the dynamic calibration experiments, the step input and output signals with different amplitudes are obtained.
针对瞬态温度测量设计了一种薄膜热电偶，提出了一套瞬态温度传感器动态标定的实验方案。
In this paper, a kind of thin film thermocouple is designed for transient temperature measurement, and a new experimental scheme of temperature transducer dynamic calibration is presented.
光度标定实验表明：该相机的数字输出线性度好，可用于获取所需要的图像。
Luminosity calibration experiment proves the good linearity of the camera's digital output, and it can be used to obtain the required images.
本文的主要内容如下：（1）相机标定运用单像灭点理论，对实验所使用的非量测数码相机进行标定。
The main content of the paper is as follow:(1) camera calibrationUse the single-view calibrating method of vanishing points to calibrate the non-metric digital camera.
用电阻应变仪对布拉格光栅光纤传感器应变传感特性进行实验对比标定，得出了表征fBG性能的应变传感灵敏系数。
A calibration test has been performed on FBG with strain gauges, and the strain sensing sensitivity coefficient of the properties of FBG was gained.
计算表明，在太阳池中可能出现的温度和盐浓度的范围内，标定结果与实验数据精确相符。
It is proved from calculation that the results of calibration are precisely coincident with experimental data in the possible temperature and salinity ranges of solar pond.
文章通过理论推导、计算数据及实验数据对转子流量计流量计算理论及刻度标定进行探讨。
A theoretical calculation on the flow in the rotameter and its calibration were studied both theoretically and experimentally.
并对现有测量切削温度的标定与实验方法进行了一些评述。
Some evaluations are also made on currently used testing and calibrating methods of the cutting-temperature measurement.
用汞灯和激光作为标准光源对系统进行了测试分析和标定，得到了较满意的实验结果。
The test, analysis and calibration of this system have done with the Hg light and the laser as standard lamp-house.
并在实验基础上提出了采用分段标定及对环境温度补偿结果进行修正的方法，提高了测量精度。
To improve the measurement accuracy of the thermometer, the calibration for different ambient temperature and the correction of ambient temperature compensation are presented.
并在实验基础上提出了采用分段标定及对环境温度补偿结果进行修正的方法，提高了测量精度。
To improve the measurement accuracy of the thermometer, the calibration for different ambient temperature and the correction of ambient temperature compensation are presented.
应用推荐