特殊设计的真空吸塑复合成型模具，确保迷宫的准确性和复合强度。
Specially designed vacuum composite forming die to ensure the accuracy and composite density.
研究了铜—铝轧制复合的最佳工艺，并通过轧前组元金属状态、压下率和温度对复合强度的影响，了解了铜—铝复合机理．。
The best process of Cu-Al rolling compound is analysed- The Cuotl compound mechanisms are understood by the effect of the metal state, the reduced ratio and the temperature.
整个建筑是一个复合百叶组成的多层表皮系统，这些百叶可旋转和变厚以适应不同的日照强度、通风要求和材料性能。
The building is a system of multiple layers of composite louvers which thicken and rotate according to solar exposure, ventilation, and materials performance.
车身单体(包括基本车身和底盘)采用了强度高而质量轻的复合材料技术制造。
The monocoque (the basic body and chassis) is built using tough but light composite technology.
虽然塑料复合材料也能提供高强度，轻巧的部件，但塑料复合材料几乎很难回收利用。
Whereas plastic composite materials can also provide great strength and lightness, they can be difficult if not impossible to recycle.
复合材料的纳米结构也能使较轻的材料具有很大机械强度。
The nanostructure of composites can also provide great mechanical strength in relatively light materials.
我们制造的这种纳米复合材料柔软，可塑性强，而且机械强度大。
We make this nanocomposite which is flexible, still soft, but mechanically stronger.
能源循环车轮由碳纤维-芳纶复合材料制成，从而减轻重量，增强整体强度。
Energy Return Wheel is made out of carbon fiber and kevlar components that decrease the weight and increae the overall strength.
在复合图像中，在连续低能图像中的最大强度捕俘获的时态数据可以建立血管结构。
In a composite image, the vascular architecture is constructed through maximum intensity capture of temporal data in consecutive low-power images, he said.
蚱蜢自行车是一种可折叠的电动自行车，它可以被折叠成手推车形，便于携带。复合材料的使用，保证了其硬度和强度。
Grasshopper is a foldable electric bicycle that turns into a trolley for easy transport. The use of composite materials provides rigidity and strength.
结果表明，轧制变形程度和铝层加热温度都是影响复合板初结合强度的主要因素。
The results prove that the initial bonding strength mostly depends on total reduction and heating temperature of al.
研究表明，随着钢纤维的体积分数增大，复合材料的分散系数和抗压强度增加。
The research indicated that dispersal coefficient and compressive strength of the composites increase with the volume fraction.
本文通过试验与工程实践，介绍采用碎（砂）石桩及低强度混凝土桩组合构成复合地基的试验成果、计算方法及应用检测成果。
This paper introduces the test results and calculative method by using the composite foundation of sand-stone pile and concrete pile with low strength.
本文通过对水泥基体掺入碳纤维进行研究，得出了复合体抗压强度、劈拉强度与碳纤维掺量的关系。
By the study on the carbon fibre reinforced cement, this paper finds the relations between carbon fibre contemt and composites compressive strength and tensile strength.
建立了预测单向复合材料纵向拉伸强度的随机核理论与模型。
The random crack core theory and model for predicting the longitudinal tensile strengths of unidirectional composites is built.
采用有限元方法分析了颗粒增强铁基复合材料强度和应力与颗粒形状、尺寸以及体积分数的关系。
The finite element method is used to analyze the relationship between strength and stress of the particle reinforced iron matrix composites and the shapes, sizes and fraction volume of the particles.
研究结果表明，复合材料的冲击强度、拉伸强度随玻纤用量的增加而提高。
The result showed the impact strength and tensile strength of the composite increased with the increase of the content of the glass fiber.
顾比复合移动平均线长期组下边缘是一个更加有用的度量趋势强度和潜在反弹点的方法。
The lower edge of the long term GMMA is a more useful measure of trend strength and potential rebound points.
单向复合材料的力学性能、热强度保持率及湿热强度保持率都比较高。
The main mechanical properties of the unidirectional composites are good in room temperature, thermal or wet—thermal conditions.
由此产生的复合材料具有优异的强度且耐磨性优于单橡胶。
The resulting composite has superior strength and abrasion resistance over rubber alone.
目的：比较整体固化与分层固化光固化复合树脂的压缩强度、拉伸强度及弯曲强度。
AIM: To compare the compressive strength, tensile strength and flexural strength of bulkily filled and incrementally filled visible light-cured composite resin.
研究表明，增加变形程度和选择合适的轧制温度能提高复合板的界面初结合强度。
The results indicated that increasing the deformation and a proper rolling temperature may improve obviously the bonding strength.
本文讨论了复合材料强度的统计分析方法。
In this paper a statistical analysis method for strength of composite materials is treated.
本实验证实MIC渗透玻璃的渗透性能达到临床要求。渗透后的复合体颜色稳定，强度可靠。
This experiment proved that the infiltrative characters of MIC glass meet the clinical requirement, the composite's color is steady and the mechanical intensity is stable.
该理论不仅可以给出复合材料的初裂强度和极限强度，而且还能给出复合材料的应力-应变曲线。
Not only the strength at first crack and ultimate strength can be calculated, but the stress-strain curve of composite material can be established.
本文利用复合材料强度设计的方法，对其强化结构进行了设计计算，建立了纤维增强定向成型材强化结构模型。
This paper introduced the way of using design composite material, designed and calculated its strengthen structure and made its mathematics model of strengthen structure.
探讨了热处理温度、萃取条件、晶须含量、粉体粒径对偏磷酸钙产物形貌和复合材料强度的影响。
The factors influencing the morphology and strength of the samples such as heating temperature, extraction condition, crystal content and powder diameter were discussed.
探讨了热处理温度、萃取条件、晶须含量、粉体粒径对偏磷酸钙产物形貌和复合材料强度的影响。
The factors influencing the morphology and strength of the samples such as heating temperature, extraction condition, crystal content and powder diameter were discussed.
应用推荐