将基于性能的设计思想引入密肋壁板轻框体系的设计方法中。
The idea of a seismic design based on property was introduced into the design method of the new structure.
在此基础上，本文采用直接基于损伤性能的能力设计方法来实现基于性能的设计。
On the basis of these analysis, theory and method of direct damage performance-based capacity design is presented in this paper.
基于性能的设计方法提出，使弹塑性分析地震反应方法得到地震工程界的广泛关注。
Basing on the performance based seismic design, nonlinear analysis has been widely caught attention in earthquake engineering.
几十年来，先后诞生了拟静力方法、反应谱方法、时程分析方法、基于性能的设计方法等抗震设计方法。
For the recent decades, the pseudo static method, the response-spectrum analysis, time-history analysis, performance-based design method, spring out early or later.
通过设定适用于本工程的性能目标，采用基于性能的设计方法对结构进行了计算分析，采取了有针对性的抗震加强措施。
Suitable seismic performance target was set, calculation analysis was done with seismic performance design method, and strengthening measures were applied based on analysis results.
AXIs对象模型(AXIOM)是一个XML对象模型，设计用于提高XML处理期间的内存使用率和性能，基于Pull解析。
AXIs object model (AXIOM) is an XML object model designed to improve both memory use and performance during XML processing and is based on pull parsing.
RIFE初始的实现，基于性能的考虑，只设计使用一条线程来访问Map。
The initial RIFE implementation was designed to only access the map using a thread for performance reasons.
最后，可以自动化您的部署过程，并设计用来解决故障的应用程序，以确保您能够从基于云的应用程序获得可接受的故障性能特征。
Finally, automate your deployment process and to design your applications for failure to ensure that you get acceptable failure performance characteristics from your cloud-based application.
他们的工作发表在《应用物理快报》 ：基于双高能态的高性能同质光谱增益量子级联激光器的设计。
Their work is published in Applied Physics Letters: High-performance, homogenous broad-gain quantum cascade lasers based on dual-upper-state design.
他们的工作发表在《应用物理快报》：基于双高能态的高性能同质光谱增益量子级联激光器的设计。
Their work is published in Applied Physics Letters: "High-performance, homogenous broad-gain quantum cascade lasers based on dual-upper-state design."
提出了一种基于usb和FPGA的高性能数据采集设计方案并详细介绍了其软硬件实现方法。
A design scheme of high - performance data acquisition based on USB and FPGA and its hardware and software implementation are introduced.
在建筑结构基于性能要求的抗震设计方法中，抗震措施是一个重要的组成部分。
The seismic measure is one major part of the seismic design based on the performance requirements of buileing structures.
设计了一基于模型的计算力矩控制算法，并深入探讨了其应用于三种不同轨迹规划方法下的控制性能。
A model based control scheme employing computed-torque control has been presented, and its applications in three different path planning methods have also been discussed.
并进行了仿真研究，结果表明，基于稳定性而设计的模糊控制系统不仅具有良好的动态及稳态的性能，而且具有很强的抗扰能力。
The simulation results show that fuzzy control systems which are designed based on the stability have not only good dynamic and steady state feature but also strong rejection ability to disturbances.
做为本安全的网络管理代理的应用讨论了网络性能分析的概念及其参数选择，并设计了一个简化的基于WEB的网络管理解决方案。
As an application of safe network management agent, we discuss concept of network performance and its parameters choose, and design a simple network management solution based on WEB.
介绍一种基于组态软件车用水泵性能测试系统的设计方法。
The design method of a performance test system of automobile water pump based on configuration software is introduced.
为提高无人机大气数据(高度、空速)检测速度，优化飞行控制性能，设计了基于GM 8123芯片的快速数据检测系统。
A design of data test system based on GM8123 is presented in this paper. It can improve the test speed of air data (UAV) and optimize the flight control performance.
对基于优化阻抗设计思想完成的短网的性能作了静态对比和动态分析。
A static comparison and dynamic analysis of short net performance based on impedance optimization design idea were made.
因而它具有广阔的应用前景。本论文的主要任务是基于ARM技术，设计一个性能优良的正弦波波形发生器。
Therefore it has the broad application prospect Present paper's primary mission is based on the ARM technology, designs a performance fine sine wave profile generator.
为了提高虚拟接口存储结构(VISA)存储网络系统的性能，设计实现了基于块级的元数据管理子系统。
To enhance the performance of VISA (virtual interface based storage architecture) storage network system, a new metadata management subsystem is proposed. It is running at block-level.
为了对基于轮询机制的通信系统进行理论设计和性能评价，需要对平均排队队长进行定量分析。
In order to design and value a polling-based communication system, quantitative analysis of mean queue length is a key point.
提出了一种基于PC 104嵌入式模块的高性能测井面板设计方案。
A design scheme for high performance well logging panel based on PC104 embedded module was proposed.
为提高动态系统的性能，提出了一种基于线性矩阵不等式技术的鲁棒输出反馈控制器设计方法。
To enhance the performance of dynamic systems, a design method of robust output-feedback controller based on the linear matrix inequality technique was proposed.
文中还初步讨论了基于这种程序设计模型的性能优化原语、编译优化和任务调度等问题。
The primitives of performance optimization, compile-time optimizations and task scheduling related with the model are also discussed in this paper.
基于使用性能的路面设计应该从材料组成设计和结构设计两方面考虑。
Both mixture design and structure design should be considered in pavement design based on performance.
本文对基于性能的抗震设计方法中最具有代表性的直接基于位移的设计方法在剪力墙结构中的应用进行了研究。
In this paper, the application of direct displacement-based design method which is the most representative performance-based design method for the shear wall structure will be studied.
为了提高通用掩密分析技术的检测性能，针对基于加性噪声的空域掩密技术设计了一种通用掩密分析算法。
The detection performance of the universal steganalysis is improved with a new algorithm put forward for the additive noise modelable steganography in the spacial domain specially.
提出了一种有效的基于FPGA器件的多核系统原型设计与性能评估方法。
This paper proposed an effective FPGA-based way for designing and evaluating the prototype of NoC system.
实时存储系统的设计与实现一章，提出基于计算机高性能总线结构的实时存储设计思想。
In the chapter of design and implement of real time storage system, we put forward the design idea based on the computer high performance bus.
实时存储系统的设计与实现一章，提出基于计算机高性能总线结构的实时存储设计思想。
In the chapter of design and implement of real time storage system, we put forward the design idea based on the computer high performance bus.
应用推荐