这个类的可编程接口同其它两个类也不一致，它稍微有点麻烦。
The programmatic interface of this class is not consistent with the other two timer classes and it's also a bit more cumbersome.
利用ANSYS用户可编程接口技术，设计了一种轮轨动力接触单元。
A kind of dynamic wheel-track contact element is designed by the technology of ANSYS User Program Features.
介绍利用AT 89 C51单片机，作为可编程接口芯片的使用方法。
This paper introduces the way of using AT89C51 single chip computer as programmable interface chip.
作为一种可编程接口电路，多种功能的数据采集模式通过相应的接口软件来实现。
As a programmable interface circuit, its multifunctional data acquisition modes can be realized through co...
利用EZ - USB FX2的通用可编程接口(GPIF)达到雷达图像传输的高速要求。
By using the general programmable interface (GPIF) of EZ-USB FX2, high speed data transmission for radar image has been achieved.
由于应用程序是为消息传递接口而编写的，因此当应用程序运行在可编程的设备上时，不需要任何改变。
Since applications are written for a message-passing interface, no changes are required when an application is run on a programmable device.
可启动映像以及一些接口是通过服务器的启动只读存储器(ROS)和可擦可编程只读存储器(EPROM)创建的。
The bootable image is created along with interfaces with the server's boot Read-Only Storage (ROS) and Erasable Programmable Read-Only Memory (EPROM).
或者，您可能更喜欢可编程方式的窗口管理器，这样您就可以像控制命令行接口那样来控制窗口。
Or, you might prefer a programmable window manager, so you can control its behavior as much as you control the command-line interface.
这可以通过使用多个可编程的SNMP接口之一来实现。
We can do this by using one of the many programmable interfaces to SNMP.
大多数Web框架和浏览器层高级接口(例如可编程的Session对象)简化了Web开发。
Most Web frameworks and browsers layer higher-level interfaces (a programmable Session object, for example) that simplify development.
通过基于稳态视觉诱发电位构造的脑-机接口获取控制指令，通过可编程逻辑控制器(PLC)控制机械手完成规划的动作。
We could obtain dictates in the steady-state visual evoked potential (SSVEP) and can control the spatial movement of the artificial limb through a programmable logic controller (PLC).
主动网络是一种新型的网络体系，它为用户提供了可编程的接口，用户可通过网络中的节点动态地注入所需的服务。
Active network is a kind of novel network architecture and it provides a programmable interface to the user where users dynamically inject services into the intermediate nodes.
主动网络是一种新型的网络体系，它为用户提供了可编程的接口，用户可通过网络中的节点动态地注入所需的服务。
Active network is a kind of novel network architecture. It provides a programmable interface to the user where users dynamically inject services into the intermediate nodes.
采用现场可编程门列阵设计arinc 429,MIL-STD - 1553B航空总线接口通信系统，实现总线设备之间的互联。
The ARINC429, MIL-STD-1553B and CAN avionics bus interface communication system based on Field Programmable Gate Array (FPGA) are designed, which links different bus instruments.
分析了网络协议测试仪的串行通信接口功能，设计了一种可编程多协议串行接口电路。
The function of serial communication port in protocol tester was analyzed and a programmable multi-protocol serial communication interface circuit was designed.
通过利用现场可编程门阵列fpga设计微控制器的接口电路，使得电路的设计变得简单灵活。
The design of interface circuits of micro controller becomes simple and flexible due to using FPGA.
主动网络为用户提供了可编程的接口，用户可通过网络中的节点动态地注入所需的服务。
It provides a programmable interface to the user where users dynamically inject services into the intermediate nodes.
利用现场可编程门阵列(FPGA)的高速、高密度、可在线修改的特点，设计一智能接口模块。
Using the rapidness, high degree of accuracy and emendable on line of FPGA, an intelligent interface module was designed.
这是可编程电流源采用单线接口，128个级别之一。
This current source is programmable using a single wire interface to one of 128 levels.
针对可编程ASIC和MCS51单片机的特点，对两者之间的接口方式进行了分析。
According to the feature between programmable ASIC and MCS51 single chip microcomputer, authors analyze the interface methods between them.
介绍了可编程控制频率合成器接口类型，设计了一种基于PC并口的频率合成器编程控制装置。
This paper introduced the interface modes of programmable synthesizer, and designed a control unit based on PC print port.
利用单片现场可编程门阵列(FPGA)可构成一个SOPC，实现了低成本、多速率、多接口的误码测试系统。
An error ratio testing system featured with low cost, multi-speed grades, multi-interface and a SOPC based on a single field programmable gate array (FPGA) chip were presented.
LTC 6915是具有14级可编程增益的仪表放大器，采用轨对轨输出，其增益可通过串行或并行接口方便设置。
The LTC6915 is a precision programmable gain instrumentation amplifier with rail - to - rail output. The gain can be programmed to 14 levels through a parallel or serial interface.
介绍了新型通信控制器的硬件设计，着重描述了通信接口部分，用复杂可编程逻辑器件CPLD解决了CAN 控制器芯片SJA 1000与AT 91RM 9200之间的时序逻辑问题。
The hardware structure is introduced, emphatically the communication interface circuit. The time sequence logic problem between CAN controller chip SJA1000 and AT91RM9200 is solved using the CPLD.
介绍了可编程视频输入编码芯片SAA7111和可编程视频解码输出芯片SAA7185工作原理和接口电路设计。
Introduces operation principle and interface circuit design of Video Input Processor SAA7111 and Video Output Processor SAA7185.
两线串行接口，实现输出会被强制平仓，调整和上升和下降，在可编程的摆率与测序的延迟时间。 输入和输出电压，以及输入和输出电流和温度是可读的。
The two-wire serial interface enables outputs to be margined, tuned and ramped up and down at programmable slew rates with sequenced delay times.
该驱动板以现场可编程逻辑门阵列为DSP与编码器、脉冲命令和功率模块等电路之间的接口，以最新的智能功率模块(IPM)作为功率输出驱动芯片。
FPGA is used as interface between the DSP and the encoder, pulse command and power module. The latest intelligent power module (IPM) is used to provide the function of power stage.
ICS1523是一种高性能可编程行同步信号发生器，它带有一个I2C串行总线接口，可以方便地对内部寄存器进行配置，能产生用户需要的同步信号。
ICS1523 is a high performance programmable line-lock clock generator with the I2C serial bus interface. User can use it to generate desired line-locked clock by programming it.
介绍了利用现场可编程门阵列fpga实现低电压差分信号—光纤接口的协议透明、远距离、高速数据传输系统。
Based on field programmable gates array (FPGA), a method of implementing a long-range agreement transparent, highspeed LVDS and optical communication was firstly introduced.
介绍了利用现场可编程门阵列fpga实现低电压差分信号—光纤接口的协议透明、远距离、高速数据传输系统。
Based on field programmable gates array (FPGA), a method of implementing a long-range agreement transparent, highspeed LVDS and optical communication was firstly introduced.
应用推荐