低功耗,高速,单电源比较器参考。
介绍了单电源运算放大器的设计方法。
The design of single power operational amplifier is presented.
介绍了单电源供电运算放大器的设计方法。
The design method of single power supply OPA is presented in detail in this paper.
单电源,低功耗,高输出电流反馈放大器。
Single Supply, Low-Power, High Output, Current Feedback Amplifier.
微功耗,四路,单电源,精密运算。放大器。
然后详细介绍了单电源脉冲热丝TIG焊机的控制电路。
Secondly, the control circuit of hot wire TIG welding with single power source was introduced in detail.
图1显示了驱动轨输出时,典型单电源放大器的输出摆幅。
Figure 1 shows a typical single-supply amplifier's output swing as you drive the output to the rails.
本文对一种新型单电源级联多电平拓扑的控制策略进行了研究。
This thesis mainly focuses on the control strategy of a new cascade multilevel converter with single DC source.
解决了单电源和多电源网络规划、线路交叉点及线路导线截面选择等问题。
Accordingly, such problems as single power source and multi-power resources network planning, path connection nodes and path wire section are resolved.
热电阻传感器、电桥电路、单电源运放、单片计算机、动磁线圈依次电连接;
The thermal resistance temperature sensor, the electric-bridge circuit, the single power supply op amp, the monolithic computer and the moving magnetic coil are electrically connected in sequence.
该光接收机采用单电源供电,由一级放大器、两级源级跟随器和一个反馈电阻组成。
It is composed of an amplifier stage, two stages of source follower and a feedback resistance, and use a single supply voltage.
近几年来,单电源工作已经成为一个系统小型化、价格低廉化和便携化越来越重要的要求。
Over the last several years, single-supply operation has become an increasingly important requirement as SYSTEMs get smaller, cheaper, and more portable.
AD7693是一款16位、逐次逼近型模数转换器(ADC),采用单电源(VDD)供电。
The AD7693 is a 16-bit, successive approximation analog-to-digital converter (ADC) that operates from a single power supply, VDD.
以单片机MSP430F 449为控制核心,设计了一个5V单电源供电的低噪声宽带放大器。
Using microcontroller MSP430F449 as the operation core, a low noise wideband amplifier provided with 5v single power supply is designed.
压电晶体增稳器是装备遥控直升机的主传感器,它以低电压、单电源供电,功耗小,成本低为最显著的特点。
The piezocrystal stabilizer featuring singly power supplying with low voltage, low power dissipation and low cost, is a dominant sensor for the equipment of remote-control helicopters.
采用运放单电源供电电路,实现成本低廉,结构简单,性能优越的设计,可广泛应用于低功耗医疗仪器设备。
Adopting single supply operator amplifier, the design realizes low cost, simple construction and superior capability. It can be widely used in low power medical instruments.
多个PSE200 U模块也可以连接到一个单电源,且可轻松地使用其内置的DIN导轨装配夹进行安装。
Multiple PSE200U modules may also be connected to a single power supply and can be easily installed using its built-in DIN rail mounting clip.
主电路为单电源供电,控制电路以高性能单片机80c 196kc为核心,实现了对喷焊过程的自动控制。
Its principal circuit is that of single power supply and the control circuit takes the high-performance monolithic computer 80c196kc as its kernel to implement automatic control of hardfacing process.
基于移动医疗服务系统功耗低的特点,采用运放单电源供电电路,可实现成本低廉,结构简单,性能优越的设计。
It adopts single supply operator amplifier based on the characteristic of mobile medical service system. The design realizes low cost, simple construction and superior capability.
应用包括传感器放大器,直流放大块,和所有的传统运算放大器,现在可以更容易地在单电源电压系统实现电路。
Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems.
随着供应公正八点五毫安,并能够从单电源电压从5V至12 V运行电流,这些放大器提供了非常高的小功率消耗。
With a supply current of just 8.5ma and the ability to run from a single supply voltage from 5v to 12v, these amplifiers offer very high performance for little power consumption.
对单电源、低功耗应用,在放大器的一些有限的选择面前,要达到适当的带宽和所需的精度,无疑对系统设计提出了重大的挑战。
Achieving adequate bandwidth and required PRECISION with a somewhat limited selection of AMPLIFIERs presents significant SYSTEM design challenges in single-supply, low - POWER applications.
随着供应的只是为5mA,并能够从单电源运行电压从5V至12V的电流,放大器还为手持,便携式或电池供电设备的理想选择。
With a supply current of just 5mA and the ability to run from a single supply voltage from 5V to 12V, the amplifiers are also ideal for hand held, portable or battery-powered equipment.
随着供应仅为放大器和能力,从单电源运行电压从5V至10V6毫安电流,EL5392A也是手持,便携式或电池供电的理想设备。
With a supply current of just 6mA per amplifier and the ability to run from a single supply voltage from 5V to 10V, the EL5392A is also ideal for hand held, portable or battery powered equipment.
使用文中介绍的方法设计单电源运算放大器能巧妙地解决由偏置电压引起的信号摆幅受限的问题,有较高的动态范围,而且具有比交流耦合更高的带宽。
The novel design solved the problem of limited voltage swing range caused by bias voltage at input of the OPA and achieved higher bandwidth compared to ac coupled design method.
单支红色发光二极管表示电源已接通。
随身携带至关重要的文件(遗嘱、保险单等)、应急电源以及备用药物。
Take vital documents (wills, insurance policies, etc.), emergency supplies, and extra medications with you.
将电源与单控箱连接,不过要注意接线方法。启动跑车,检查其运动方向。
Link the control box to power and start carriage to check its moving direction.
设计了一种以电流型PWM控制器UC3842芯片为核心的高频单端反激式开关稳压电源。
A high frequency single-ended flyback switching power supply is designed with current-mode PWM controller UC3842 chip as its core.
改进业务管理,通过加工相使用单851位指示数字晶闸管电源,提供实时信息。
Improved management of processing operations through the use of the Single-Phase 851 Digital SCR Power Contoller which provides real-time information.
应用推荐