本文讨论了新鲜金针菇真空冷冻干燥和蜜饯加工条件的优化。
This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes.
所有记录应与有机产品加工条件有关。
All these records have to refer to the organic condition of the product.
研究了加工条件与分散相形态、力学性能的关系。
The morphology and mechanical properties of the composites, which were processed under different conditions, were investigated in the present study.
因加工条件不同而存在豆制品中锂含量明显区别。
The results show that high amounts of lithium are in soybean and bean-products, they are useful for human body;
经验证明,不符合实际加工条件的设计往往是失败的。
Experience has proved that the design does not meet the actual processing conditions are often failures.
与厂商检讨设计图面、加工条件、改变内容等有关产品开发事宜。
Review the design graphics, processing conditions, content changes and development matters with suppliers.
与厂商检讨设计图面、加工条件、改变内容等有关产品开发事宜。
Review the design graphics, processing conditions, content changes development matters with suppliers.
综述了这三种方法的原理及加工条件,尤其是干法分提工艺及设备。
This article summarizes the principle and produce conditions of the three methods, especially on process and equipments of dry fractionation.
碳纤维制自行车是有前途的,通过应力计算会找到最适合的加工条件!
Carbon fiber of bicycle is promising, through the stress calculation can find the most suitable processing condition!
研究了加工条件、淀粉、食用胶对鳙鱼鱼丸凝胶强度和耐折度的影响。
The effect of processing conditions, starch and food gums on the gel strength and folding ability of fish balls made from bighead carp was investigated.
当加工条件比较严格时,请事先进行试验,经过反复验证后再加以使用。
When using for more stringent processing conditions, please test in advance, use after verifying repeatedly.
本论文主要研究了不同的加工条件对中国儿童二语词汇附带习得的影响。
This study aimed to investigate the effects of different processing depth on incidental vocabulary acquisition through listening to stories for Chinese young learners.
猪肉的感官品质受遗传、营养和饲养、屠宰及加工条件等多种因素的影响。
Pork quality is influenced by many factors such as pig genetics, nutrition and feeding, slaughter conditions.
加工中心要获得理想的加工精度,还要有良好的加工条件及合理的加工方法。
For obtaining ideal working accuracy of a machining center, it is important to fave good machining conditions and reasonable methods.
讨论了新鲜金针菇的不同预处理方法及其真空冷冻干燥和蜜饯加工条件的优化。
This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .
由于材料本身的特性以及复杂的加工条件,塑料注射成型过程加工过程相当复杂。
The process of the injection molding is quite complicated because of the character of the material itself and the complexity of processing conditions.
自适应切削可以保证在加工条件不断变化的情况下使切削过程始终处于最佳状态。
The adaptive cut can make cut process at optimum condition all along, in case the machining conditions are constantly changing.
概述了停留时间、螺杆结构等加工条件和不同成型工艺对制备pcn的不同作用。
Meanwhile, the effects of different compounding process and processing condition such as residence time and screw configuration on PCN were summarized.
优越的表面美学的配方,它具有优良的熔体稳定性和加工条件的范围广泛的高流量。
Formulated for superior surface aesthetics, it exhibits excellent melt stability and high flow over a broad range of processing conditions.
针对不同的加工条件及不同厚度的板材,对加工过程中板材的弯曲趋势进行了研究;
According to sheet metals with different thicknesses, bending trend is investigated during the process;
放电加工中,加工条件可随时进行修改,立即执行,且不必停机,大大简化操作程序。
Discharge in processing, processing can be revised at any time, carry out immediately by condition, And need't shut down, simplify the operation sequence greatly!
实现了以真实加工条件为前提的机床加工过程实时动态模拟,预估计加工的过程和结果。
The simulating system can realize the real-time dynamic processing imitation according to actual cutting conditions and predict machining process and results.
它是利用激光技术从物理的或化学的角度制备特殊陶瓷材料和满足陶瓷材料的特殊加工条件。
The laser processing technology is used to make some special ceramic materials physically or chemically, and meets some special processing conditions for ceramic materials.
通过考察加工条件及各功能母料的用量对薄膜性能的影响,确定了原料配方及薄膜制备工艺。
By analysing the processing conditions and influences of amounts of each masterbatch on film properties, the formulation and process are determined.
依靠实验及数据计算,检验此模型能够灵敏地定量反映外部加工条件对熔体表观粘度的影响。
Based on experiment and data calculation, this viscosity model could sensitively and quantitatively reflect the impact of the processing parameters on the apparent viscosity of the melt.
而在这些步骤中各种反应,机理和提议的加工条件对于解决产品加工中遇到的问题会有帮助。
However, the reaction, mechanism, and recommended processing conditions are helpful for trouble shooting during the processing.
结果表明:可以通过改变钻头横截面轮廓来得到不同的刀具几何形状,适用于不同的加工条件。
Result shows that different cutting edge can be got by changing DCSP according to different cutting condition.
多种因素如PVC、纤维素纤维的改性处理、加工条件等都将影响泡孔形态与制品的物理机械性能。
Many factors such as the surface modification of PVC matrix and cellulose-fiber, processing conditions all affected the cell morphology and physical properties.
多种因素如PVC、纤维素纤维的改性处理、加工条件等都将影响泡孔形态与制品的物理机械性能。
Many factors such as the surface modification of PVC matrix and cellulose-fiber, processing conditions all affected the cell morphology and physical properties.
应用推荐