该文对无滑斜碰撞的研究引入了切向系数。
The tangential coefficient for non-sliding oblique collision is introduced.
切向系数是对碰撞过程切向损耗的一种描写。
Its a description of the tangential loss in the collision process.
切向结构永磁电机极对数在3~6时较为合适。
飞机需要一个半小时,且其切向速度，非常接近8千米每秒。
The shuttle takes about 1.5 hours to go around and the speed, that tangential speed, is very close to eight kilometers per second.
推导出旋转切向流单位时间内形成滤饼层的厚度公式。
The thickness formula of forming cake layer per unit time of rotary tangential flow is derived.
四角切向燃烧是我国电站煤粉锅炉广泛采用的燃烧方式。
Tangentially firing is a widely used combustion mode in our pulverized coal boilers.
给出了复合式水力旋流器切向速度和轴向速度的基本分布规律。
The basic distribution laws of the tangential and axial velocities of compound hydrocyclones are obtained.
尽自己能做的一切向对方表达爱意和表示你能达到对方的要求。
Do all you can to show your love and your ability to measure up to what this person wants.
根据最大拉应力理论，给出了最大切向拉应力和临界载荷公式。
Based on the maximal tension stress theory, formulae of maximal tangential stress and critical load are presented.
块状电极电火花磨削采用切向进给法，当前还是较新的加工方法。
The usage of tangential feed for EDG method with block electrode is a new processing method at present.
利用质量平衡实验验证了切向超滤实验对痕量金属回收的可行性；
The mass balance experiment shows that it is feasible to recover trace metals by cross flow ultrafiltration experiment.
双切向环流气体分布器性能的优劣与导流板和套筒结构的密切相关。
The efficiency of twin-tangential annular flow gas distributor was determined by structures of baffles and sleeves.
该引脚正好符合了扩锥孔的垂直轴的轴线，要么径向或切向轴表面。
The pin fits snugly in a reamed tapered hole that is perpendicular to the shaft axis and either radial or tangential to the shaft surface.
假设当两个接触面处于相对滑动的临界状态时，切向力与垂向力成正比。
Provided two contact bodies are in the critical state of relative sliding, the tangential force is proportional to the vertical force.
改造后的切向分离器性能良好，运转稳定，保证了梗丝生产的顺利进行。
After the reconstruction of the tangential separator good performance, stable operation, ensure the smooth production fo stem threads.
旋转射流截面最大轴向速度和切向速度与喷距的负指数成正比关系衰减。
Its maximum axial and tangential velocity attenuate proportionally with the negative index of its distance from the nuzzles.
表面电渗法可有效地减少煤的切向阻力，但电极分布对电渗效果有很大影响。
Surface electroosmosis method can reduce coal tangential resistance but the pole distribution affects the result of reducing resistance.
那么单摆在振动过程中，切向力、法向力及合力的大小和方向是否在变化?。
Do the tangential force, the mormal force, the resultant force and their directions during oscillation of a simple pendulum change?
表面电渗法可有效地减少煤的切向阻力，但电极分布对电渗效果有很大影响。
Surface electroosmosis method can reduce coal tangent ial resistance but the pole distribution affects the result of reducing resistance.
其原因是磁屏表面存在较大的切向拉应力，从而在酸洗过程中产生了应力腐蚀开裂。
The presence of the greater residual tensile stress induces the stress corrosion cracking in the course of the acid pickling.
这意味着必须设置一个磁铁，以便调整质子束方向以保证沿着切向方向导入圆形粒子束管道。
That means a magnet has to nudge the protons to enter the circular beam pipe on the tangent.
并对摄像机参数标定过程中的畸变模型进行分析，主要分析了透镜的径向和切向畸变分量。
The distortion model in process of camera calibration is analyzed, and the distortion is decomposed to the radial and tangential distortion.
分析了涡旋压缩机涡旋齿切向密封难以实现的原因，提出了基于迷宫效应的涡旋齿切向密封结构。
The difficulties of scroll compressor's flank sealing were analyzed, and a new flank sealing structure was advanced based on the labyrinth effect.
最后，通过给定的参数计算了旋转库特流切向速度分布的数值解，并绘制了相应的切向速度分布曲线。
Finally, the numerical solutions of the azimuthal velocity were calculated and the corresponding distribution curves were draw out by assuming some parameters of the flow.
通过测量主轴功率获得切向磨削力，讨论了加工参数，如切深、进给率以及砂轮粒度对切向磨削力的影响。
Tangential grinding forces are obtained through monitoring spindle power and the ir variations are studied with process parameters such as depth of cut, feedrate and wheel grit size.
这一切向世上人展现，我们长期以来所以能成功并非仅仅仰赖我们专业的能力，而是因为我们致力于做对的事。
And it demonstrates to others that in the long term, we do not succeed professionally despite our commitment to doing what is right - we succeed because of it.
提出了可以考虑初始缝隙和切向剪切滑动的“剪切滑移模型”，可以用于模拟结构与相邻物体之间接触面的力学特性。
A model named shear slide model is presented, which can be used to simulate the mechanical property of the contact surface between the structure and its adjacent object.
提出了可以考虑初始缝隙和切向剪切滑动的“剪切滑移模型”，可以用于模拟结构与相邻物体之间接触面的力学特性。
A model named shear slide model is presented, which can be used to simulate the mechanical property of the contact surface between the structure and its adjacent object.
应用推荐