采用尺标系统控制切割宽度。
同时增加了刀片调节装置来调节刀片位置，以此来调节薄膜或片材的切割宽度。
Simultaneously, a cutting blade adjusting device is arranged on the cutting device for adjusting the position of the cutting blade so as to adjust the cutting width of the films or the sheets.
刀口模切割线间的间隙最小，冲孔模修整时的分布宽度也很小，这些都是要注意的。
The gap between the minimum cutting edge cutting, trimming punching die when the distribution width is small, these are to be noticed.
另外，过大的切割速度和过大的喷嘴高度都会引起切口上下宽度差的增加。
In addition, too much cutting speed and big nozzle height can cause and the increase of the poor incision width.
钢带：卷起来用于加工保持架的带型钢材。通过热轧或冷轧达到一定的厚度，然后切割成一定的宽度并卷成钢带卷。
STRIP: Flat rolled steel used in the forming of cages. Hot or cold rolled to specified thickness, slit to specified widths and wrapped into coils.
在分频多任务（用于模拟讯号），信道切割成次信道，每个信道具有不同的频率宽度，指定给特定的讯号。
In FDM (typically used for analog signals) the channel is subdivided into subchannels, each with a different frequency width that is assigned to a specific signal.
另外，本文还提出了计算文字笔画宽度的方法和图形的自动切割算法。
In addition, image automatic cutting algorithm and a method to obtain the width of character stroke are proposed.
研究了激光光斑直径及离焦量、切割速度、激光功率等工艺参数对齿轮切缝宽度及加工质量的影响。
The effects on kerf width and quality made by laser facula diameter, focal point position, cutting speed, laser power and other technological parameters were studied.
为减小切口宽度，提高切口质量，进行了水再压缩等离子弧切割陶瓷实验研究。
To reduce the kerf width and to improve the kerf quality, the experiments of ceramic cutting with water constricted plasma arc are carried out.
新型的“V”转子刀具保证切割物料沿转子整个工作宽度均匀分布。
The new"V"shaped rotor knives guarantee an equal distribution of the cut goodsacross the entire rotor width.
结果显示在相同的条件下，切缝宽度随切割速度的增加而有一定的变化，随激光功率的增加而显著增加。
Results showed that the cutting seam width varied with the increase of cutting speed and laser output power.
这些逆冲断层具有切割深、断距大、剖面宽度大的特点。
These thrust faults are found in the study to be characterized with deep dissection, big separation and major width of the section.
切割小车由控制系统带动缓缓行进，经过纵切装置将坯体的两侧余料切除并按设定宽度对坯体进行纵向切割。
The control system drives the cutting trolley forward, and the longitudinal device cuts the leftover of the material, and the crosscut device cut it in needed width.
同时剪切带的数量和宽度都增加，产生相互交错并切割孪晶板条，使基体的细化面积增大。
Also, both the number and the width of shear bands were increased, which cut twinning bands and refine more area of microstructure.
切割只发生在刀片经过的那一点上，并不同时发生在刀片的整个工作宽度内。
Cutting occurs at the touching point only, it does not occur in all working range.
针对剪板机切割和小车切割：第一步，选择二维剪板机切割，第二步，输入原材料名称、数量、长度和宽度；
For cutting machine cutting and a car cut: the first step, choose 2 d cutting machine cutting, the second step, the input materials name, quantity, length and width;
第一和至少第二位置对应于给进路径的可变宽度，给进路径将相关物品导向朝向至少一个切割器。
The first and the at least second position correspond to a variable width of a feed path directing an article toward the at least one cutter.
本文通过对电火花线切割加工工艺规律的分析，选取影响工艺效果的主要因素：工件厚度、脉冲宽度、脉冲间隔、脉冲高度，作为输入向量。
By analyzing the law of WEDM processing, this article selects the main factors affecting process: the thickness of the work-piece, pulse width, pulse interval, pulse height, as the input vectors.
本文通过对电火花线切割加工工艺规律的分析，选取影响工艺效果的主要因素：工件厚度、脉冲宽度、脉冲间隔、脉冲高度，作为输入向量。
By analyzing the law of WEDM processing, this article selects the main factors affecting process: the thickness of the work-piece, pulse width, pulse interval, pulse height, as the input vectors.
应用推荐