这是因为，大多数时候，没有一模一样的分析程序，没有方法保证他们使用相同的算法来分析日志和流量。
For the most part, there is no consistency among analytics programs and no way to guarantee that they are looking at the logs or the traffic the same way.
在计算与分析的基础上，给出了常用参数范围内的剪应力计算诺模图。
Based on the calculation and analysis, the abac for shearing stress calculation in the range of normal parameter is obtained.
最终的进胶位置根据模流分析。
然后，采用一种基于模匹配过程的横向散射矩阵方法，系统分析了微带导波结构的特征值问题。
Then, a transverse scattering matrix approach based on mode matching technique is used to analyze the eigenvalue problem of microstrip guiding wave structures.
计算并绘出了非稳区域边界，分析了非稳振荡波形变化规律及其模结构。
The regularity of the change of the unstable oscillation wave form and the structure of the power spectrum were analysed.
理论分析和实例验算证明了网络模矢方法的合理性、有效性和通用性。
Reasonableness effectiveness and currentness of the NAPS method are proved by theoretical analysis and checking up the computer time in a real case.
本文提出的网络模矢法是将网络分析法与模矢探索技术结合起来的方法。
The NAPS method presented in this paper is a method combining a network analysis with a pattern search technology.
首先从耦合模方程出发，比较了数值分析结果与小信号近似分析的结果。
Firstly, the comparison of numerical analysis results and the small signal analysis results is given based on the coupled mode equation.
最后，通过与其它模加法器在结构以及算法等方面进行分析比较，表明本文所设计的模加法器性能优异。
Finally, through the analysis and comparison with other kind of modulo adders, we draw the conclusion that the performance of the new modulo adder is better.
根据接线盒盒体的功能、结构与尺寸，进行了材料性能、注射工艺等分析，设计了注射模。
According to the function and structure and dimension of junction box, the material capability and injecting technology were analyzed, the structure of injection mold was designed.
DSP与PC机的通讯以RS-485为基础，分析了RS-485总线在组网过程中因地线的不正确连接引发的共模干扰和EMI问题，并提出了解决方法。
The problem in the communication between DSP and PC based on RS-485 is presented, and the solution of common-mode disturbance and EMI which are generated by incorrect ground connection is stated.
从塑件分析、工艺分析、结构设计三方面详细阐述了常见塑料三通注射模的设计过程。
The design process of plastic wye injection mould is stated in detail from the analysis of plastic part , the analysis of the process and the design of the struction.
用傅里叶变换的方法分析了锁模激光器中模式间的相位和振幅涨落对锁模脉冲列特性的影响。
The Fourier transform method has been used to analyze the influence of modal amplitude and phase fluctuations in a mode-locked laser on performance of its output pulse.
对塑料件产品进行模流分析以改进设计和制造过程。
Do mold flow analysis of plastic parts for improving design and manufacturing.
通过实验分析，证实了对场分布影响较大的第一阶谐振频率是TE101模，TE101模的谐振频率是TEM传输室的上限使用频率。
Through the experiment, it was validated that the first frequency that have great effect on the field distribution is TE101, and the resonant frequency of TE101 is the limited frequency of TEM cell.
通过该冲件特点的工艺分析，确定级进模排样方案过程和模具主要工作零件及模具总装结构设计。
Analyzing the craft features of a punching piece, ascertain the process and scheme of a progressive die blank layout, and the design of main die working parts and final assembly structures.
加工窗口分析、它零件的模流分析，检查熔体温度、具温度、塑压力和充填时间。
Process window analysis, another part of mold flow analysis, examines melt temperature, mold temperature, injection pressure, and fill times.
组合凹模的应力分析是一个非常复杂的问题，对其进行精确分析是解决模具寿命的关键。
The stress analysis of compound female die is a very complicated problem. Its accurate analysis is the key to solve die longevity.
分析了发夹的工艺特性，介绍了发夹注射模的结构设计和工作原理。
Analyzed the technology characteristics of the barrette, introduced the injection mold structure and work principle.
本文在分析注塑模充模流动的基础上，通过具体实例，阐述了计算机辅助分析在模具设计中的作用。
Based on the analysis of polymer flow in mold filling, the important role of computer aided analysis in injection mold design is presented through concrete examples.
在仔细分析了建筑模网装配过程的基础上，对模网装配机进行系统工程的设计分析。
Based on the assembling process analysis, the system engineering analysis to the construction formwork assembling machine was applied.
分析了一种型芯较长的注射模结构及成型特点。
The structure and shaping characters of injection mold with long core get analyzed.
采用模匹配方法分析了月形波导和加片圆波导的截止频率。
The Lunar waveguides and vained circular waveguides are analyzed by using the mode matching method.
分析更普遍适用的同塔四回输电线模型，对其相模变换方法进行计算分析。
A more generally applicable model of FPL and its PMT are also discussed.
模流分析技术是利用计算机对注塑件动态填充过程进行模拟。
The mold flow analysis utilizes the computer to simulate dynamic filling process about the injection mold.
本文分析挤压模失效的基本形式及因素，从不同的方面提出了提高挤压模使用寿命的具体措施。
This paper analyzes the basic form and factor for extrusion mould, advance us to increase the using life of extrusion mould from different way.
分析了不锈铜器皿拉伸模表面粘附机理。
The adhesive mechanism of a drawing die has been analysised.
分析了不锈铜器皿拉伸模表面粘附机理。
The adhesive mechanism of a drawing die has been analysised.
应用推荐