另外,作者还对提高凹板的分离能力作了实验研究。
Further research has been made by the author to improve the separating capacity of the concave through experiments.
板式盘管或螺旋管是由两片有对应凹槽的平板或凸、凹板对压成型的。
The plate type coiled pipe or spiral pipe is molded by two flat plates with corresponding grooves or a convex and a concave plates which are oppositely pressed.
本论文具体针对在凹板印刷机运转过程中的收卷放卷张力控制进行讨论与研究。
Main subjects discussed in this dissertation focus on the tension control in unwinding and winding processes for the gravure press machine.
将逐稿器的分离率计算公式应用于切流式谷物脱粒装置凹板的分离率计算时,将产生较大的误差。
If the separating rate equation of straw walker is direct applied to calculating the separating rate of tangential threshing unit, a considerable error would be met in the results.
本文提出了一种新的脱粒装置凹板分离率的数学模型,并将其与原模型及实验数据进行了分析比较。
This paper presents a new mathematical model for calculating the separating rate of the concave in grain threshing unit.
在对射流冷却平板模型和射流冷却凹板模型数值模拟的基础上,设计了射流冲击冷却式蒸汽冷却叶片,并对其进行了热耦合数值模拟。
The present study numerically investigated a conceptual type of internal steam cooling vane with the impingement cooling technology on the basis of plane model and concave model.
在对射流冷却平板模型和射流冷却凹板模型数值模拟的基础上,设计了射流冲击冷却式蒸汽冷却叶片,并对其进行了热耦合数值模拟。
The steam cooling method was applied in this paper to study the design and characteristics of cooling structure for a vane of gas turbine.
在上终椎椎体生长板凸、凹侧软骨细胞PCNA增殖指数有明显差异且有统计学意义(P<0.05)。
There was a significant difference of the proliferative potential index(proliferating cell nuclear antigen, PCNA index) between convex side and concave side at the upper end vertebra(P<0.05).
顶椎椎体生长板凸、凹侧组织学分级差异有统计学意义(<0.05)。
The histological grades were significantly different between the convex and the concave side of the growth plate in the apex vertebrae (P<0.05).
排放板包括凹入的变形部分、形成在变形部分的中心的突起和围绕变 形部分形成的凹槽。
The vent plate includes a concave deforming portion, a protrusion formed in the center of the deforming portion, and a notch formed around the deforming portion.
流化床为支撑板加气囊袋结构形式时,支撑板可为凹弧形。
When the fluidized bed is in the structural style of a supporting plate and an air bag, the supporting plate can be a concave arc.
厚实板类铸件按传统工艺生产,容易产生缩孔、缩凹、缩松、夹砂、胀包等铸造缺陷。
The shrinkage cavity, depression, shrinkage porosity, scab and swell defects often took place with the heavy plate castings produced by adopting traditional foundry method.
具有发光二极管的一块印刷电路板和装在上面的一个二极管整流桥被容纳在一个凹座中。
A printed circuit board having light emitting diodes and a diode rectifier bridge mounted thereon is retained in a recess formed in the base portion of the light reflector.
一种厚纸糊成的可滑动调节的轻分隔物,安放在日本住宅地板和天花板的凹糟里,可移动到各种位置形成房间。
Light, sliding partitions of thick paper mounted in grooves on the floor and the ceiling of a Japanese house and moved into various positions to form rooms.
介绍了多工位数控冲床用百页窗模具的设计,重点介绍了下装凸模、上装镶拼凹模及卸料板的设计和计算方法。
This article introduces the design of louver tooling for turret punch press, mainly focusing on the design and calculation of die, punch body and stripper plate.
天花板以半透明玻璃和创造高度错觉的凹嵌区域为特色。
The ceiling features translucent glass and recessed areas that create an illusion of height.
凹嵌式天棚照明的使用增强了天花板的表面效果,并展现了一丝现代魅力。
Cove lighting is used to enhance their appearance and provide a modern twist.
将凹部底面的颜色设定成比板表面(18)颜色的相对亮度低。
The color of the bottom surfaces of the recesses is set to brightness relatively lower than the brightness of the color of a board surface (18).
通过比较,得出各种方法的优劣,为车身覆盖件抗凹分析提供依据,也为车门等闭合件外板抗凹分析提供参考。
By comparison, get both good and bad methods, which provide the basis for body panel dent analysis, also provide a reference for doors and other closer dent analysis.
通过比较,得出各种方法的优劣,为车身覆盖件抗凹分析提供依据,也为车门等闭合件外板抗凹分析提供参考。
By comparison, get both good and bad methods, which provide the basis for body panel dent analysis, also provide a reference for doors and other closer dent analysis.
应用推荐