对聚合物基体及碳系导电填料进行共混或接枝改性是当前主要的研究方向。
Modification of polymer basal body and carbon series conductive filler by grafting and blending is the main direction of current research.
聚乙烯共混物的接枝性能取决于组成共混物的聚乙烯种类和用量。
The grafting property of PE blends depends on the kind and content of PE.
文章介绍了常规阻燃纤维改性的方法，主要有共聚法、共混法、皮芯复合纺丝法和接枝共聚法。
The paper introduced the methods to modify conventional fire-retardant fiber such as copolymerization, blends, core spinning and composite skin graft copolymer.
本文研究共辐射接枝法改善聚四氟乙烯车削板的粘接性能。
This is a work to improve viscous property of polytetrafluoroethylene turning plate by, mutual radiation grafting.
以过氧化二异丙苯(DCP)为引发剂，使用反应挤出机研究了不同种类聚乙烯及其共混物接枝马来酸酐的反应规律。
Taking DCP as initiator, the reaction rule of different kinds of PE and their blends grafted with MAH in a reactive extruder was studied.
结果表明：接枝共聚物的加工性能优于PVC和PVC/CPE共混物，且其加工性能随CPE含量增加而逐渐改善；
The results were as follows. The processability of graft copolymers was better than that of PVC and PVC/CPE blends, and gradually improved with increasing CPE content.
通过共聚、共混、复合、辐射、接枝等方法提高聚乳酸使用性能；
The properties of PLA are increased, using co-polymerization, blending, compounding, radiation, grafting, etc.
所采用的硫化剂可以使PP／EPDM共混物中的EPDM发生动态硫化作用，且使PP接枝于EPDM交联网络上。
The vulcanizing agent used could result a dynamic vulcanization to the EPDM in the PP/EPDM blend, and make PP graft onto the crosslinked network of EPDM.
考察了共混比、不饱和极性单体、PP熔体挤出接枝物、增塑剂及EPDM用量对共混物力学性能的影响。
The influences of blending ratios, EPDM's quantity, PP melt - extruded grafting copolymers, unsaturated polar monomers and plasticizer on the mechanical properties of the blends were investigated.
同时考察了接枝淀粉与PV A- 1799两种浆液溶液共混体系的稳定性。
The two size mixtures of grafting starch and PVA-1799 were blending, and the stability of solution system was analyzed.
采用PP熔融接枝MAH和不饱和羧酸混合单体通过反应挤出增容PP/PA6共混物，研究了增容共混物两相间的界面相互作用。
The interfacial interaction of compatibilized PP/PA6 blend prepared by melt grafting of PP with MAH and other unsaturated acid has been studied.
进而制备了接枝改性淀粉和聚己内酯的共混材料，并对共混材料的力学性能、疏水性和界面性能进行评价。
The blend of PCL and PCL-gSt was prepared, and the mechanical properties, hydrophobicity, interface properties of the blend were investigated.
接枝聚合物的两相微观结构比其共混物更均匀。
The results show that the grafted polymer has a more uniform microstructure than that a blend polymer.
高分子链的支化，与另一种共聚物接枝，或共混支化聚合物和线性聚合物是增加其粘度的基本方法，以使其能够发泡。
Branching polymer chains, copolymerizing with another monomer, and blending branched or cross-linked polymers are the basic methods to increase its viscosity so that it can be suitable for foaming.
大分子单体和小分子共单体共聚是合成接枝共聚物的重要途径之一。
The copolymerization of macromers with comonomers proves to be one of the most important ways of synthesizing well-defined graft copolymers.
综述了近年来聚乙烯和聚丙烯在接枝、交联、填充、共混等方面的改性进展，并指出了研究方向和发展趋势。
Advance in modification of polyethylene and polypropylene, namely grafting, crosslinking, filling and blending, was reviewed and the development trend was discussed.
通过熔融共混制备了POE及其马来酸酐接枝物增韧PTT 共混物，研究了增韧PTT共混物的结晶性能、力学性能和形态。
PTT blend toughened by POE and POE-g-MAH were prepared by melting blending, and the morphology, crystallization properties and mechanical properties were studied.
介绍了辐射接枝生产离子交换纤维的主要方法：共辐射接枝法、无氧预辐射接枝法和有氧预辐射接枝法。
The radiation grafting methods of producing ion-exchange fiber were introduced, including co-irradiation grafting, non-oxygen pre-irradiation grafting and oxygen pre-irradiation grafting.
介绍了辐射接枝生产离子交换纤维的主要方法：共辐射接枝法、无氧预辐射接枝法和有氧预辐射接枝法。
The radiation grafting methods of producing ion-exchange fiber were introduced, including co-irradiation grafting, non-oxygen pre-irradiation grafting and oxygen pre-irradiation grafting.
应用推荐