应用组织学、组织化学和电镜技术对实验室内培养的单环刺螠虫消化道和体壁的发生及分化过程进行了研究。
The ontogenesis and differentiation of digestive canal and body wall in Urechis uniconctus was also studied using histological, histochemical and TEM methods in the laboratory.
长期以来,人们一直在寻找关于农药穿透生物体壁的某种规律,以期生产出更好的农药品种及获得对农药的最佳利用。
It has long been the wishes for man to look for the law of pesticide penetration into organism with the aim to produce some better varieties of pesticides and to make best use of pesticides.
用显微及亚显微方法研究了中华绒螯蟹雌体不同生理阶段(幼蟹、未成熟蟹、成熟蟹、抱卵蟹和流产蟹)腹肢的体壁结构变化和粘液腺发育特征。
The tegument and exoskeleton structure and the cement glands activities of female pleopod in different physiological stages of Eriocheir sinensis were investigated by histological method.
血吸虫还有一种如同隐形披风的特殊外衣,称为体壁。
Schistosomes also possess what seems to be a cloak of invisibility: an unusual covering known as the tegument .
半球形封头壁厚与筒体壁厚不相等的高压容器是由端部密封装置、筒体、半球形封头和加强箍等组成的一种新结构容器。
High pressure vessel with hemispherical head thinner than cylinder wall is a new type of vessel which consists of sealing device, cylinder, hemispherical head and reinforcing ring.
求算了巷道风温恒定时岩体壁面温度、岩体与空气的非稳态热交换系数和围岩调热圈厚度。
The temperature of tunnel wall, coefficient of unsteady heat exchange and thickness of heat-adjusting layer at constant air temperature in a tunnel are calculated.
基因芯片数据显示在家蚕5龄第3天的头部和体壁组织中的表达量较高,RT - PCR验证结果与此一致。
Microarray data in different tissues showed that it has significant expression signals in head and epidermis of day-3 5th instar larvae, which was verified by RT-PCR.
本实用新型涉及分体式空调器中的附件,具体涉及一种用于安装分体壁挂式空调器室内机的安装板。
The utility model relates to an accessory of a split air conditioner, in particular to a mounting plate which is used for arranging an indoor machine of a split hanging air conditioner.
试验证明,增量压弯成形工艺是成形具有一定曲率外形的复杂结构整体壁板的合理而有效的方法。
The experiment indicates that the incremental bending forming technology is a reasonable and effective method to form the integral panel with complete structure and some curvatures.
将整体壁板分解为特征的集合,并进一步将特征分解为特征的位置、方向、几何尺寸、布尔运算等信息的集合。
An integral wing panel is represented as feature sets, and the features are decomposed as information sets such as location, direction, geometric size, Boolean operation etc.
研究表明两种来源的酚氧化酶均参与了黄粉虫幼虫的体壁硬化过程,但在作用方式及与底物的亲和力方面存在差异。
The results showed that both cuticle and hemolymph PO were involved in cuticle sclerotization of T. molitor, but have differences in action mode and affinity to substrate.
胞外蛋白酶通过参与营养竞争,协同降解植物病原菌细胞壁和根结线虫体壁等多种途径参与木霉的生物防治。
Proteases participate in the biocontrol processes through a synergistic mechanism involving competition for nutrition, degradation of the cell wall of phytopathogens and nematode cuticles, etc.
整体壁板成形是大飞机制造的关键难题之一。
The forming of integral panels is one of the key issues in the manufacture of large passenger aircraft.
研究了基于全反射消光原理测量管状透明体壁厚的原理和方法。
The principle and method for measuring the wall thickness of transparent tube are presented.
在GB 150—1998《钢制压力容器》标准上建立矩形截面容器筒体壁厚和刚性外加强圈的优化设计模型。
Based on GB 150-1998, a mathematical optimum design model of wall thickness and exterior strengthen structure for rectangular pressure vessel was established.
这些实验结果分属于:平衡稳定等离子体的获得,等离子体形成阶段的特性,杂质和等离子体壁相互作用等几个主要方面。
They are related to the following aspects of tokamak plasma: conditions for stable tokamak discharge, stages of toroidal discharge formation, impurity behaviour and plasma-wall interactions, etc.
介绍在特殊夹层压力容器制造中对夹层壳体壁上进行开孔翻边热冲压成形的工艺技术。
This article describes a hot pressing formation technology to make flanged openings on special jacketed vessel shells.
采用逐点增量弯曲的方法对网格式带筋整体壁板进行了试验研究,并进行了有限元模拟。
In this paper, the incremental bend forming technology and finite element simulation are applied to form the panel.
本文对微尺度热现象研究中引起广泛关注的附在固体壁面上液体薄膜的结构和输运性质进行了研究。
The dissertation discusses the structure and transport property of ordered liquid film in vicinity of solid plate, which attracted wide attention and interest of researchers.
针对横剖面为方型和圆型的陷落式腔体模型,在来流为均匀流作用的条件下,开展水动力实验研究,测量腔体壁面的流体定常压力变化。
Different cross sections of the model have been tested, such as square and circle, and the constant pressure of the fluid acted on the inside wall of the cavity is measured.
昆虫几丁质酶是分解昆虫体壁和中肠围食膜几丁质的重要酶类。
Insect chitinases are a group of important chitinolytic enzymes, which hydrolyse the cuticle and peritrophic membranes of insects.
本文从理论上证明了这两种腔体理论在腔体壁面为漫发射体和漫反射体条件下是一致的。
This paper proves in theory the unity of these two theories in case of diffuse emission and reflection of the walls of cavities.
当用增加筒体壁厚或者接管壁厚的方法不能有效地降低带长矩形接管受压圆筒体的应力强度时,提出了采用加强筋的方法,此措施可达到显著降低矩形接管部位应力水平的目的。
Structural reinforcement measures were proposed in order to reduce the stress level of the joint which can not be effectively reduced by increasing the thickness of the cylinder or tube wall.
随着现代机翼整体壁板设计水平的不断提高,传统的制造模式已不能满足其制造要求。
With the development of integral wing panel design, conventional manufacture mode of integral panel can not satisfy modern manufacturing requirement.
蜡壳的各个板块与体壁上突起的腺孔分布区位置相对应。
Each plate of the wax covering was corresponding in position with the projecting integument area, on which the wax pores are densely distributed.
体壁上还有大小和形状不同的刚毛,它们不同于生于凹陷的刚毛。
There was a variety of sizes and types of setae other than those associated with pits, especially on the head and legs.
结果:可根据体壁细胞的纹理、毛窝的形态、大小及刚毛的特征进行区别。
Result: the texture of integumentary cells, the shape and size of hair socket and bristle were important characters for species identification.
分析了微尺度下熔体壁面滑移机理,研究了微注塑成形中壁面滑移对熔体充模流动行为的影响。
Based on the analyses of wall slip mechanism of polymer melt flowing, the effects of wall slip on melt filling flow behavior in micro injection molding were investigated.
分析了微尺度下熔体壁面滑移机理,研究了微注塑成形中壁面滑移对熔体充模流动行为的影响。
Based on the analyses of wall slip mechanism of polymer melt flowing, the effects of wall slip on melt filling flow behavior in micro injection molding were investigated.
应用推荐