叶轮机传统的设计方法已取得了很大的成功。
ABSTRACT Traditional methods of turbomachinery design have made great success.
采用传统的设计方法，很难求得凸轮的最佳轮廓。
The optimum earn outline is obtained rarely by the traditional design method.
因而，传统的设计方法很难获得最优的设计方案。
With such an approach, there is no guarantee to achieve the optimum design.
传统的设计方法和工程手段已经与实际要求不相适应。
The traditional design methods and engineering measures are not compatible with practical requirement.
与传统的设计方法相比。这种方法提高了设计精度和效率。
Compared with conventional design method, this method improves design accuracy and efficiency.
汽车的设计方法分为传统的设计方法和现代的CAE技术。
The methods of automobile design can be divided into the traditional design method and modern CAE technology.
传统的设计方法计算复杂，设计效率极低，验证结果极其困难。
The traditional ways of design is so complicated with low design efficiency, and it is hard to validate the results.
本文主要概括了零件逆向设计方法与过程和其他传统的设计方法。
In this paper, parts reverse design method and process, as well as other traditional design methods are mainly summarized.
此系统改变了传统的设计方法，提高了设计效率，具有一定的实用性。
The system may change the traditional design method and enhance design efficiency, and has some practicability.
传统的设计方法在具体条件下只实现一种工作方式，保持一种方式的导航信息。
Only one kind of navigation mode can be performed and informations of one kind of navigation mode can be maintained in SINS with traditional design method.
由于轴流压气机传统的设计方法不完善，使得基于此种方法设计的机组效率低下。
Because the traditional design method of axial flow air compressor was not perfect, it made the assembly work at low efficiency.
换热设备传统的设计方法开发周期长、标准繁多、设计过程复杂且质量难以保证。
The conventional design and manufacture process is long and complex, design criterions are numerous, and the design quality is hard to be guaranteed.
从瀑布法到RUP，尽管我们改变了许多，但是我们并没有全部摒弃传统的设计方法。
While there were a number of things we changed in going from waterfall to RUP, we didn't throw out everything from our original plans.
由于传统的设计方法开发周期太长，不利于市场竞争，而逐渐被现代设计方法所替代。
Because the traditional construction cycle of design method is too long, and it does not suit the market competition, so it is substituted by the modern design method gradually.
传统的设计方法存在设计周期长、结构冗余、成本高、缺乏对结果的验证等诸多弊端。
There are many problems in traditional design method such as long period, structure redundancy, high cost and lack of validation etc.
文中提出的设计新途径是以统计概率理论为基础，比传统的设计方法更合适、更可靠。
Determinisic approach is usually adopted in traditional foundation design without consideration of the scatterness, randomness or fuzziness of parameters in all aspects.
该设计方法与传统的设计方法相比，具有外围电路简单，程序修改灵活和调试容易等特点。
Comparing with traditional design method, this design method has characteristics of simple peripheral circuit, easy modificative procedure and debugs, etc.
为了弥补传统的设计方法带来的缺陷，将蒙特卡洛方法引入枪械零件的可靠性设计与分析。
In order to repair the flaws of traditional design method, it is reasonable to introduce the Monte Carlo method to the reliability design and analysis of gun components.
传统的设计方法受到了巨大的挑战，一些具有良好应用前景的先进制造技术和设计方法应运而生。
Traditional design methods have been encountered enormous challenges, some have good prospects for the application of advanced manufacturing technology and design methods have emerged.
并由此初步探索古典园林传统的设计方法与思路，为我们更好理解和保护传统园林建筑提供借鉴。
Through the searching of the traditional design methods and ideas of classical gardens, a good sample is provided for us to better understand traditional architecture and protect them.
曾用此法对现有引信弹簧在相同的初始条件下进行了再设计，结果表明用此法比用传统的设计方法为优。
The method was used to redesign the existing fuze springs under similar initial conditions. It has been proved that this method is better than the traditional ones.
由于整体硬质合金立铣刀形状结构复杂，传统的设计方法无法对刀具进行精确的强度、刚度及应力分析。
Because of complex structure, traditional designing methods can not be used to do intensity analysis, stiffness analysis and stress analysis precisely for solid carbide end mill.
而目前国产海洋修井机井架的设计大都采用传统的设计方法，从而造成海洋修井机井架尺寸和质量均偏大。
Most of the homemade ocean workover RIGS are designed by the traditional method at present, therefore they are fairly large and heavy.
该方法与传统的设计方法相比，不但可以大量减少工作量，缩短设计周期，并且能提高器件的准确性与稳定性。
The method with the traditional design method, not only can significantly reduce the workload, shorten the design cycle, and can improve the accuracy and stability of the device.
配气凸轮传统的设计方法是把配气机构看成绝对刚体，不考虑它在运动时的弹性变形，这种设计也称为静态设计。
Valve gear is regarded as stiffness in the traditional design and its elastic deformation in motion is neglected. This method is called static design.
工作装置工作时的失效在很大程度上是设计不合理造成的，究其原因在于传统的设计方法和手段不能适应工程需要。
Work device failure when work due to designing unreasonable in largely. Traditional design methods and tools have couldn't meet the modern engineering needs.
随着我国汽车工业的飞速发展，新车型推出的速度越来越快，传统的设计方法已经不能满足产品更新换代的快速响应要求。
With the high speed of the development of the national automobile industry, traditional design method can no longer satisfy the quickly responding requirement of the market.
针对低功耗电路设计的需求，提出了一种低功耗约束下CMOS低噪声放大器的设计方法，并与传统的设计方法进行了对比。
A design approach for low power CMOS low noise amplifier (LNA) is presented and it is compared with the traditional LNA design method.
然而用传统的设计方法进行设计非常复杂、繁琐、周期较长而且计算结果难免有过大的安全系数，不利于充分发挥设备能力。
But the conventional design way is very complex, and the safety factor figured out with traditional design pattern is a bit of bigger, and this makes against exerting the ability of devices.
然而用传统的设计方法进行设计非常复杂、繁琐、周期较长而且计算结果难免有过大的安全系数，不利于充分发挥设备能力。
But the conventional design way is very complex, and the safety factor figured out with traditional design pattern is a bit of bigger, and this makes against exerting the ability of devices.
应用推荐