对所给出的补偿方法进行了仿真研究，结果验证了单相statcom进行快速平衡化补偿的能力比较强。
It is proved by the simulation results of the proposed compensation method that the single phase STATCOM possesses the ability to carry out fast balancing compensation.
仿真结果验证了所提补偿方法的高精度，而且不受CT负载特性、CT剩磁情况及原边电流直流成分的影响。
The simulation results verify the high precision of the proposed compensation method regardless of the waveform of ct primary current, remanent flux level, and load characteristic.
针对每一种控制算法分别采用阶跃风速和紊流风速信号进行了仿真，仿真结果验证了控制算法的可靠性和有效性。
The simulation is conducted for each control strategy in different wind situations. The results show the reliability and affectivity of the proposed control strategy.
最后完成了系统的开环和闭环实验，取得了和仿真一致的结果，从而验证了控制方案的可行性和优越性。
At last, experiment of open loop and closed loop system are completed, which is in accord with the simulation result. It verified feasibility and advantage of the control scheme.
仿真结果验证了本文方法具有良好的检测性能，可以在克服信道衰落的同时抑制多址干扰。
Simulation results demonstrate that the proposed method offers higher detecting performance and is capable of combating both channel fading and multiple-access interference.
仿真和实验结果验证了自动连续多调谐滤波器的可行性，具有结构简单、滤波性能好等优点。
The results of simulation and experiment verified the feasibility of harmonic filter with continuous multi-tuning, and it has the advantage of simple structure and better filtering performance.
设计扩展卡尔曼滤波器进行卫星编队轨道状态估计，数学仿真结果验证了这种导航方案和算法的有效性。
The orbit states estimation is achieved through the extended Kalman filters design. The simulation results verify the validity of this navigation method, and show preferable navigation accuracy.
验证结果表明，仿真系统能够完成操纵显控台的全部功能，为设计全自动测试平台奠定了基础。
The result of the validation shows the simulation system can realize all the functions of the console, and lay a foundation for designing an automatic test platform.
通过对基于该方法设计的BP网络离线训练后所进行的仿真结果分析与比较，使其有效性和可行性得以验证。
After the designed BP network be out-line trained based on the method, its efficiency and feasibility have be proved by comparing and analyzing simulated results.
将设计好的制导控制算法嵌入六自由度弹道模型中进行验证，仿真结果表明了此快速仿真架构的正确性和制导、控制方案的可行性。
The GNC algorithms designed are embedded in the trajectory model. The results show that the simulation structure is valid and the GNC schemes are feasible.
仿真结果验证了电路具有良好特性，该电路采用标准CMOS工艺实现，具有较高的实用价值。
The simulating results have proved that the designed circuit has good characteristics. The circuit realized with the standard CMOS process has higher practical value.
最后用简单示例系统和IEEE 118系统对前面的方法进行了验证，仿真结果表明该方法的有效性和合理性。
Finally, the above mentioned method is verified by a simple example system and IEEE 118 bus system, the simulation results show that the presented method is effective and reasonable.
文中详细介绍了用OPNET仿真实现TD MA多路访问技术的主要过程，仿真结果验证了协议的正确性和有效性。
This paper introduces the main processes for simulating TDMA technology using OPNET. The simulation results demonstrate that protocol is correct and effective.
仿真及实验结果验证了该方法的正确性，表明该方法适用于串并联负载谐振逆变器。
Finally, the correctness is verified by simulation and experiment. It is indicated that this method is adequate for the inverters with series-parallel resonant load.
系统为用户提供大量的、可视化的仿真结果，从而协助他们完成飞行方案的设计、验证、论证、筛选和确定。
The system can give user plentiful and visually result of simulation; consequently help them accomplish the design, validation, argumentation, filter and decision of flight scheme.
通过将仿真模型的计算结果与西南石油学院钻头研究室部分台架实验结果进行对比，验证了该仿真模型的正确性。
Compared the result of the simulate model with the experimental data that collected by the Lab. of Drilling Bit in Southwest Petroleum Institute, the model has been validated.
计算机仿真和实验验证的结果表明，改进型三次样条函数插值可以给出足够精度的估计结果。
It will show that the improved spline interpolation can give the estimate result in enough precision. The approach is implemented and validated by computer simulation and experiment.
在进行了一系列多种实验条件下的现场实测之后，把实验结果与仿真结果进行了对比分析，验证了该系统数学模型的正确性。
After a series of practical test under various conditions, the test results is analyzed and compared to the simulation results, then the mathematic model of this system is verified.
仿真结果验证了组合拓扑结构及组合调制策略的有效性，为多电平逆变器组合拓扑结构的实际应用奠定了基础。
The simulation results proved that the validity of hybrid structure and corresponding modulation strategies, it lays the foundation of practical application on hybrid multilevel inverter structure.
在模拟发电机组上进行了失磁实验和仿真分析，实验结果验证了仿真结果的正确性。
The field loss test and simulative analysis are carried out on a simulative generation system and the experimental results verify the correctness of simulation results.
最后给出的计算机仿真和实验结果验证了上述结论，为数控伺服系统的谐振分析提供了一种新的方法。
At last, the results of computer simulation and experiment are presented, they not also prove the above conclusion, but also offer a new way to analyze resonance for servo drive.
将这种模糊自适应控制器应用到倒立摆系统的跟踪控制，仿真结果表明，它具有良好的控制性能，从而验证了该方法的有效性。
Simulation tests on the tracking control of the pendulum system have demonstrated the good performance of the controller and the effectiveness of this method.
文中给出了圆周阵的测距、测向公式，并从理论上分析了测距性能，计算机仿真结果验证了理论分析的正确性。
The formulas of calculating range and bearing for circular array are derived, and ranging performance are analysed theoretically. The simulation results show that the theoretical analysis is correct.
通过键合图仿真软件20-SIM对恒流堵塞器的流量特性进行计算机仿真分析。 最后采用专门设计的试验台对仿真结果进行试验验证。
Then the flow characteristic of the constant flux blanking plug is simulated with the 20-SIM software, and it is verified by experiment on the test bench.
针对某轿车建立了基于多刚体理论的侧面碰撞乘员约束系统动态仿真模型，并依据试验结果进行了模型的有效性验证。
The dynamic simulation model based on the multi-rigid-body theory of the passenger restraint system for side impact of a car is created, and its validity is verified by tests.
在SIMPLORER中搭建了逆变器供电式三极电磁轴承的磁悬浮控制系统，仿真结果验证了所设计的控制系统的正确性。
And then we build the inverter-fed three-pole AMB control system in SIMPLORER, the performance of the control system is verified by the simulation.
数值仿真结果验证了该方法不仅具有很强的关于传感器故障的容错能力，而且还可检测、分离和估计出相应的故障。
Computer simulation results show that the proposed approach has strong fault tolerant ability a-gainst sensor faults, moreover the sensor faults can be on -line detected, isolated and estimated also.
通过在鼠笼式电机传动系统参数辨识中应用的仿真结果，验证了该辨识方案的正确性。
The validity of the derived identify scheme is proved by the simulation results of HNN based asynchronous motor drive system parameters' identification in consider of sensors' characteristics.
在T形和S -曲线速度轮廓运动模式下，模型的仿真结果与理论分析一致，验证了该方法的合理性和有效性。
The reasonability and validity of the method was testified by the coincidence of the simulation and the theory analysis under the motion mode of trapezoidal velocity and S-velocity profile.
在T形和S -曲线速度轮廓运动模式下，模型的仿真结果与理论分析一致，验证了该方法的合理性和有效性。
The reasonability and validity of the method was testified by the coincidence of the simulation and the theory analysis under the motion mode of trapezoidal velocity and S-velocity profile.
应用推荐