In 2012, the OLED panel will have a 50% higher material cost and 30% lower yield than LCD panels.
而在2012年，OLED面板的材料成本则比lcd面板高50%，良率则比后者低30%左右。
Supported by the belief that people never yield in spite of reverses will have greater power than those who appear to be invincible material force.
由百折不挠的信念所支持的人的意志，比那些似乎是无敌的物质力量具有更大的威力。
It must be emphasized that the absence of a definite yield point does not in itself imply that the material has a low ductility.
必须强调的是，没有明显的屈服点并不意味材料有较低的韧性。
The value of stress under air pressure test shall not exceed 80% of the yield point of the material in test temperature;
气体压力试验时的应力值，不得超过试验温度下材料屈服点的80%。
The value of stress under hydraulic pressure test shall not exceed 90% of the yield point of the material in test temperature;
液体压力试验时的应力值，不得超过试验温度下材料屈服点的90%；
This paper makes the optimum autofrettage analysis of thick-walled cylinder of the material with different yield strength in tension and compression base on the Mohr's yield criterion.
本文运用莫尔屈服准则对承受内压的拉压屈服强度不同材料的厚壁圆筒进行了自增强分析，得到了依赖于材料拉压比的厚壁圆筒的最佳弹塑性界面半径、最佳自增强内压。
This method can produce lysozyme by 0.41% yield in weight and 87% yield in enzyme activity, reduce the cost, and increase the reuse of material.
此法溶菌酶重量收率0.41%，酶活收率87%左右，可降低生产成本，提高原料的综合利用率。
Based on the yield criterion and plastic potential theories, a plastic constitutional relation, yield condition and yield curve equation in plane strain for powder metallurgical material were derived.
粉末冶金材料屈服条件是粉末冶金材料广义塑性理论的基础，其数学表达式对粉末冶金材料广义塑性理论方法的建立有重要影响。
A process for producing a stamper substrate in which a rolled metal sheet can entirely be used as a substrate material to thereby enable maintaining high production yield.
本发明提供一种能够将金属轧制板整体作为基板用材料进行使用，并能够较高地维持制造成品率的压模用基板的制造方法。
The process is able to decrease the cost of production, get sulphur yield stable, improve the shape and distribution of sulphides in material, and increase the plasticity of hot -working.
同时电渣重熔改善了硫化物形貌和分布情况，提高了材料热加工塑性。
Cotton canopy structure and yield was determined and analyzed in different water and fertilizer conditions under mulch drip irrigation (MDI) with Xinluzao no. 7 as the test material.
以新陆早7号为试材，进行了不同水肥条件下膜下滴灌棉株群体冠层结构测定和产量结果分析。
They are mixed with water and incubated in a process called mashing. The insoluble material is then removed to yield the wort, a clear liquid containing fermentable sugars and other simple molecules.
它们与水混合并且在糖化工艺中经过一段时间的培养，然后将不溶性的物质除去以得到糖化醪，它是澄清液并含有可发酵糖和其它简单分子。
Such performances of material as tensile strength, yield strength, Charpy energy and COD fracture toughness are tested in experiment.
针对评价中所需要材料的性能数据，对材料做性能测试，测定出材料的拉伸性能、夏比冲击韧性和断裂韧性（COD值）。
It is found that the alloying elements segregation in grains and the grain boundary cleanliness control the yield stress value and the tough-strength properties of this material respectively.
发现材料的晶内偏析和奥氏体晶界洁净度分析控制钢的屈服强度和韧度。从而改变了此钢按细化晶粒度控制强韧性的工艺指导思想。
Can be used in DuoZhong raw material with novel structure, advanced technology, extrusion pressure, high yield, the characteristics of high vacuum degree, adopt pneumatic clutch to control.
可适用于多种原料，具有结构新颖、技术先进、挤出压力大、产量高、真空度高的特点，采用气动离合器控制。
The effect of methanol content in the raw material on the yield of TDC is investigated.
对反应原料中甲醇的含量对甲苯2,4二氨基甲酸甲酯收率的影响进行了计算。
A new energetic furazano compound, 3-amino-4-aminoximidofurazan(AAOF), was synthesized in yield of 72.4% using dicyanopropane as initial material by one-pot method.
以丙二腈为原料，用一锅法合成了呋咱类含能化合物3-氨基-4-氨基肟基呋咱（AAOF），收率72.4%。
And the surface material includes propanediol, which is capable of enhancing moisture keeping performance of tobacco leaf, making leaf crushing in the cutting process uneasy, and yield high.
另外表料中含有丙二醇，加料可提高烟叶保湿性能，使切丝过程中不易碎叶，出丝率高。
And the surface material includes propanediol, which is capable of enhancing moisture keeping performance of tobacco leaf, making leaf crushing in the cutting process uneasy, and yield high.
另外表料中含有丙二醇，加料可提高烟叶保湿性能，使切丝过程中不易碎叶，出丝率高。
应用推荐