Measuring paint area of work to statistic of the quantitative coating.
测量粉刷工作的区域以定量所需的涂料的数量。
It provides paint cooling by circulation through the use of heat exchangers to remove heat generated by the electrical work of coating or that was created through the mechanical work of pumping.
经过热交换器冷却槽液，以除去由涂装电功及泵运行的机械功所产生的热量。
The work principle of the technique of screen printing and screen printing for plunger with D10 coating and the flow process of graphite coating of screen printing for plunger were introduced.
介绍了丝网印刷技术以及运用D10涂料进行活塞丝网印刷技术的工作原理以及活塞丝网印刷石墨涂层的工艺流程。
Body work has an exterior coating for superior shine.
机构的工作有一个外部涂料的优势服务。
The spray coating equipment should have good electrostatic earthed device. Try to enlarge the air humidity of the work location as much as possible.
喷涂设备要有良好的静电接地装置，要尽可能增大工作场所内空气的湿度。
Testing and monitoring of benzene, methylbenzene and dimethylbenzene on occasion of diesel engine paints coating is very important industrial sanitation work.
柴油机整机外表油漆涂装现场苯、甲苯、二甲苯(三苯)的测试与监控是工业卫生的一项重要工作。
When inspection is required by the purchaser, coating work not done in the presence of the purchaser may be subject to rejection.
如果业主要求检查，那么业主有权拒收在其不在现场时生产的涂塑产品。
Coating work may be rejected if the procedure used in applying the liquid-epoxy coating material does not comply with this standard.
业主也有权拒收不符合标准生产的涂塑产品。
Both at home and abroad is fire-retardant coating research have already undertaken tunnel is a lot of work.
国内外就隧道防火涂料研究已开展了大量的工作。
The research work was composed of preparation and releasing and coating.
对药物树脂的制备、体外释放及缓释包衣都进行了研究。
The improvement field emission by Hf coating on CNTs surface is attributed to the low work function, chemical inertness and good conductivity of HfC.
我们认为碳纳米管表面发射性能的提高归功于表面碳化铪膜良好的导电性、化学惰性和低逸出功。
The characteristic and structure of FHA, preparing methods of FHA coating are introduced in this work. The application of sol-gel technology in preparing FHA coating is emphasized.
介绍了FHA的结构特点、FHA涂层的制备工艺，并重点陈述了溶胶-凝胶技术在制备FHA涂层中的应用。
The improvement field emission by hf coating on CNTS surface is attributed to the low work function chemical inertness and good conductivity of HFC.
我们认为碳纳米管表面发射性能的提高归功于表面碳化铪膜良好的导电性、学惰性和低逸出功。
It can work as dispersion auxiliary in disperse dye and VAT dye, especially in red and other kinds. Can also be used in coating and printing.
用于分散染料、还原染料加工时的分散助剂，尤其在分散红及有些染料品种使用时效果特别显著，还可用于涂料、印花。
Development should be finished in 48 hours after coating, if there is ample humidity in work shop, it must be finished within 12 hours.
涂覆后需在48小时内曝光显影，若操作场所湿度较大，需在12小时内完成。
The upper limit of the range of the coating hardness used in the quality control in production can be determined according to the threshold in the specific work hardness curve.
对某类涂层随涂层硬度增加，刮削功上升并有一阈值，以此值可确定生产中检验硬度范围的上限。
The feasibility of metal-ceramic gradient coating on the work surface of BF tuyere was proved, and the superiority of HVOF tie coating on the work surface of BF tuyere was confirmed.
证明了在风口上喷涂金属-陶瓷梯度热障涂层的可行性以及利用HVOF打底层制备金属-陶瓷热障层的优势。
The present situation of the research work, coating technology and application of additive solventless silicone release agent in recent years are described in this paper.
本文介绍了近年来加成型无溶剂硅酮隔离剂的研究状况、涂布工艺及应用。
The advantage of hot spraying technology is high efficiency and wide selecting suitable materials, it can get form coating on big work piece, which are other surface technology can't be obtained.
热喷涂技术的优点是生产效率高，选材广，可在大工件上得到厚涂层，这是其它表面技术所不及的。
In order to enhance the anti-corrosion of carbon steel cooler and ensure the equipments to work safely for long time, a coating was manufactured on the carbon steel.
为了提高碳钢冷换设备的耐蚀性能，保证设备长周期安全运行，以普碳钢为基体，采用热浴法制备了一种耐腐蚀涂层，并给出了制备冷换设备用耐腐蚀涂层的工艺方法。
The principle and the characteristics of wire explosion spray coating technique and our experimental research work are presented in this paper.
介绍线爆喷涂的原理特点及我们作的试验研究工作。
When objects require spray coating or spray welding, the user can close the high-pressure oxygen gas valve and open the powder feeding valve (4), so the hot spray device can work.
当需要喷涂或喷焊时，关闭高压氧阀，打开送粉阀(4)，热喷涂装置即可工作。
The SEM and TEM photograph are conducted to analyze structure and phase of coating and explains why this coating can improve work life of router.
采用SEM和TEM法，分析了镀层的组织与相结构，揭示了镀层提高铣刀寿命的原因。
It can be used for glass coating line and mirror coating line instead to replace the manual work, resulting in more efficiency, safety and reliability.
可配套于镀膜玻璃生产线和镀镜玻璃生产线使用，替代了人力装箱（架）的功能，提高功效，安全可靠。
When in use, the coating is coated on the surface of a protected work piece in a spraying method;
使用时，将涂料以喷涂方法涂覆于被保护工件的表面；
When in use, the coating is coated on the surface of a protected work piece in a spraying method;
使用时，将涂料以喷涂方法涂覆于被保护工件的表面；
应用推荐