With finite element method and MSC.
应用有限单元法及MSC。
Analysing and calculating the strength of generator frame and rotor with finite element method.
利用有限元方法分析验算了机座和转子的强度。
Stress of al motorcycle wheel under the service condition was analyzed with finite element method (FEM).
用有限元法对服役状态的摩托车铝合金轮毂进行了应力分析。
Many scholars analyzed the mechanisms of transfer text images and paper wrinkle with finite element method.
很多学者采用有限元方法分析了图文转移机理及起褶缺陷的成因。
Main hydraulic cylinder columns and cross beams of hydraulic press are designed with finite element method.
采用有限元方法对液压机中的主液压缸、横梁和立柱进行结构设计。
Statical analysis with finite element method is performed to pressurized pressure vessel of titanium alloys.
对型号主体系统中的钛合金气瓶进行有限元静力学分析。
The method of analyzing the tissue stress with finite element method plays a vital role in tissue engineering.
利用有限单元法进行组织工程中的组织应力分析具有重要意义。
The seepage fields are studied with finite element method based on the identification results of aquifer parameters.
基于大坝渗透系数的识别结果,采用三维有限元法分析了大坝坝体和坝基的渗流场。
A numerical model calculating displacement of jointed slab on void foundation is established with finite element method.
用有限单元法建立了可考虑接缝和地基脱空的弹性地基板位移计算模型。
The relation between optical fiber structural parameters and transmission properties is simulated with finite element method.
用有限元法模拟了光纤结构参数与传输性能间的关系。
Compared with finite element method and finite stripe method, the given method cuts remarkably the amount of calculation work.
本方法与有限元法及有限条法相比,可使计算工作量显著减少。
Combining with finite element method, fracture mechanics has been an important way to solve crack problem in road field at present.
将断裂力学理论与有限元方法结合是分析路面开裂问题的有效途径。
Temperature distribution and its amplitude of the sensor under constant current excitation are simulated with finite element method.
用有限元方法模拟了恒流加热方式下气压对传感器温度分布和温度大小的影响。
Compared with Finite Element Method and Finite Difference Method, Boundary Integral Equation Method is computationally more efficient.
与有限元法和有限差分法相比,该方法具有更高的计算效率。
The paper provides the mathematical model of numerical simulation for metal surface hardened by plasma-arc with finite element method.
给出了用有限元方法对金属材料等离子体弧金属表面强化处理过程数值模拟的数学模型。
The effects of casing diameter on acoustic log in cased-borehole at free pipe situation are investigated with finite element method (FEM).
用有限元方法研究了自由套管井中不同直径的套管对声波测井的影响。
The natural frequencies of beam are calculated with finite element method in the cases of different crack width and different crack depth.
本文利用有限元法分别计算在不同的裂纹深度、不同的裂纹开口宽度的情况下梁的固有频率。
The stress states of the ceramic nozzles with different entrance angle in the sand blasting process are analyzed with finite element method .
运用有限元法分析了不同入口锥角的陶瓷喷砂嘴冲蚀过程中的应力状态。
In this paper non-linear analysis with finite element method is used in the study of the plane stress Problems of reinforced concrete members.
本文对钢筋混凝土构件中的平面应力问题,运用有限单元法进行非线性应力分析。
Analyze truss antenna framework structure with finite element method and establish sub-model to compute the stress distribution of the speecial part.
应用有限元方法对桁架式天线骨架结构进行分析,在关注区域建立了模型计算准确的应力分布。
In this paper, relation between electron beam welding parameters and temperature field of beryllium is studied quantitatively with finite element method.
采用有限元方法,定量分析了电子束焊接工艺参数与铍环内表面温度的关系。
Comparing with finite element method, MWR has some advantages, such as simpler computer program, less input data and less computer storage requirements etc.
而本法与有限元法比较,具有程序简单,输入的原始数据少,内存需要量少等优点。
The flow stress of ferrite/pearlite steel under uniaxial tension was simulated with finite element method (FEM) by applying commercial software MARC/MENTAT.
应用MARC/MENTAT商用有限元软件,对铁素体/珠光体钢的单向拉伸过程进行了有限元模拟。
With finite element method and compressed flexible array method, this paper establishes a method calculating displacement of joint slab on elastic foundation.
应用有限元压缩柔度矩阵,建立了具有接缝传荷能力多块板的位移计算方法。
Compared with finite element method, the finite volume method maintains the local conservation properties of physical quantities and has a simpler calculation.
与有限元方法相比,有限体积法保持物理量的局部守恒性质,并且计算更加简单。
The key to establish a precise dynamic model with Finite Element Method is the simulation of the dynamic characteristics of the joint face in the machine tool.
而建立机床结构精确的动力学有限元模型的关键是对机床机构中结合面的动力学描述。
The strength and rigidity of bus body are analyzed, with finite element method and the finite element modeling is validated using the electric measure technique.
用有限元法对半承载式客车车身强度、刚度进行了分析,用电测量技术对有限元模型进行了验证。
The method and process to back analyze the above initial geostress in linear elasticity material with finite element method is discussed, followed by an example.
讨论了在线弹性介质中,通过有限元计算求解这种地应力的方法、过程,并给出算例。
The method and process to back analyze the above initial geostress in linear elasticity material with finite element method is discussed, followed by an example.
讨论了在线弹性介质中,通过有限元计算求解这种地应力的方法、过程,并给出算例。
应用推荐