The expansion of coiler during hot strip coiling was simulated with FEM method.
利用有限元方法对带钢卷取过程中的卷筒胀径进行了详细的数值模拟。
This paper is focused on the analysis of three nozzles with different entrance shrinking Angle with FEM method.
文中运用有限元法对三种不同入口收缩角的喷嘴进行了分析。
By the experiments for two-layer and three-layer homogeneous media, this method is verified to be highly precise and effective comparing with FEM method and the previous NMM method.
用此方法对均匀介质、两层介质、三层介质进行了实验，并将其结果与解析法、原nmm方法和有限元方法进行了对比，验证了此方法的有效性。
With combination of bi-directional difference method and FEM, the computation and comparison analysis on cooling effect of flexible pipe and black pipe in TGP are carried out.
利用双向差分法和有限元法相结合，对三峡大坝采用软冷却水管和黑铁管的冷却效果进行了计算与对比分析。
Compared with the analytical and experimental results, it is confirmed that the permanent magnet eddy-current brake is an effective braking method and FEM is suitable for analyzing it.
实验结果和理论分析表明永磁涡流制动是一种高效可靠的制动方法。通过与解析法和实验结果的比较，证明用有限元法分析永磁涡流制动的可行性和准确性。
Stress of al motorcycle wheel under the service condition was analyzed with finite element method (FEM).
用有限元法对服役状态的摩托车铝合金轮毂进行了应力分析。
With an actual example, research method based FEM-Multi body technology is developed for flexible structure applying dynamically loading.
同时结合实例，提出一种基于有限元-多体技术对动载作用下柔性结构的疲劳寿命预测方法进行研究。
The FEM calculation results prove that the thrust fluctuation of the motor can be effectively cut down with proposed method.
计算了不同磁极宽度情况下的电机推力，结果表明采用该方法可以有效减小电机的推力波动。
When the spacecraft structural dynamic model is updated using test data, the freedom of FEM can be matched with test freedom by means of reduction method.
利用试验数据修正航天器结构动力模型时，使用缩聚方法使有限元自由度与试验自由度匹配。
The effects of casing diameter on acoustic log in cased-borehole at free pipe situation are investigated with finite element method (FEM).
用有限元方法研究了自由套管井中不同直径的套管对声波测井的影响。
The analysis results meet with the bench test result very well, which verified the possibility of the FEM analysis method, and provide a direction ibr the research to optimization of structure.
将分析结果与台架试验结果进行对比，验证了有限元分析方法的可行性，为今后的结构优化研究提供了方向。
In Comparison with FEM, the advantages of Network Topological Method are obtained.
继而通过与相应的有限单元法的比较，说明了网络拓扑法的一系列优点。
The method of brittle coat is used to study reflective crack of asphalt pavement, comparing the experimental results with that gotten by FEM.
采用脆性涂层法研究沥青路面的反射裂缝，并将试验结果与有限元计算结果进行了比较。
To verify the reliability of FEM results, the stress distribution of deformation is measured with mesh method, and the analysis results are compared with the experimental results.
用网格法测量了半球形冲头胀形时的应力分布，并将有限元计算结果与实验结果进行了对比，验证了有限元分析结果的可靠性。
The Monte Carlo method combined with the elastoplastic finite element method (FEM) is proposed to analyze the slope stability problems.
蒙特卡洛随机搜索法与弹塑性有限元法结合，求解边坡稳定问题。
The stress distribution of continuous and recessed bonding single-lap joints is discussed with use of elastoplastic finite element method (FEM) and experiment, considering the effect of fillet.
运用弹塑性有限元法结合实验研究了连续和间隙连接的单搭接接头应力分布规律，并考虑了胶瘤的影响。
By integrating the thermomechanical coupled FEM with mathematical model of microstructure evolution, the paper proposes a numerical prediction method for microstructure during hot deformation.
将热力耦合有限元方法与金属微观组织演变数学模型相结合，提出了热变形过程微观组织的数值预报方法。
The application fields, basic principle and FEM of one step forming simulation software and its advantages compared with incremental method simulation have been introduced.
介绍了一步成形法模拟软件的应用领域、基本原理和方法以及同增量法模拟比较的优点。
This paper analyzed the effect of corroded flaw interaction on remaining strength of line pipe with the finite element (FEM) analysis method.
采用有限元数值计算方法分析了腐蚀坑交互作用对管道剩余强度的影响。
To study the influence of O-rings secondary seals, deformation behaviors of mechanical seal faces were analyzed under different pressures with the method of integral contact analysis by FEM.
采用整体接触有限单元法，考虑“O”型辅助密封圈的影响，计算了不同压力下机械密封端面变形行为。
In recent years, with the fast development of computer technology, the Finite Element Method (FEM) has become one of the most powerful analysis tools available in solving complex engineering problems.
近年来，随着计算机技术的飞速发展，有限元方法已经成为复杂工程问题求解中最强大的数值分析方法之一。
Finally, the method of body design with FEM at the concept design stage is summarized.
最后总结了如何在概念设计阶段用有限元分析的方法进行车身设计。
The finite element method (FEM) of contact theory and eigenvalue computing is used in this thesis to solve the problem of natural modal analyzing aircraft structure with contact surface.
本文采用接触理论有限元数值方法加特征值计算的方法来解决考虑连接面固有特性计算的问题。
Among the numerical simulation methods, the finite element method (FEM) is widely to solve the electric field with complex structure and multi-dielectric medium with high precision.
在常用数值求解方法中，有限元法以其通用性强，适用于结构复杂、多重介质复杂场域求解，且求解精度高等优点而被广泛用于电器电场的数值求解。
The stability factor of retaining walls is analyzed with the finite element and slip circle method, which is based on the results obtained by static and dynamic FEM.
根据分析所得的动、静应力分量，采用有限元与圆弧滑动法相结合的有限元一圆弧法，分析了挡土墙的抗滑稳定性。
The mechanics evaluation of bonding strength between coating and substrate was performed with finite element method (FEM), and an improved test model was proposed.
采用有限元法对涂层与基体界面结合强度进行了力学模拟，并对试验模型提出了改进。
The dependence of amplitude of first break for acoustic logging in cased borehole on the thickness of microannulus is studied in this paper with Finite Element Method (FEM).
本文采用有限元计算方法研究了微环厚度对套管井声波测井初至波幅度的影响。
Smoothed particle hydrodynamics (SPH) method coupled with finite element method (FEM) is used to simulate the dropping of rectangular fluid-filled tank.
采用SPH和FEM耦合的方法，考虑流固耦合效应的影响，对典型矩形薄壁充液容器的跌落过程进行数值仿真。
The main forming process of 7005 aluminum by porthole die is simulated with the FEM (finite element method).
用有限单元法对7005铝合金通过平面分流模成型齿轮泵体型材的主要过程进行了模拟。
The applicability of the restriction-equations method in smooth structures, cylinder with fixture fringe and shell with fixture seat is validated by FEM analysis.
通过有限元算例分析，验证了约束方程连接的体壳连接方法在平板结构、带安装边的圆壳结构以及带安装座的壳结构上的适用性。
应用推荐