Uniform wire diameter and good gloss.
走线平均，光泽度好。
WIRE DIAMETER - in decimal, thousands of one inch.
钢丝直径-在十进制，数以千计的一英寸。
To compensate for annealed wire diameter necking problem.
为了补偿退火线径变细的问题。
The metal wire diameter is different according to the size of the hexagon.
使用的金属线径是根据六角形的大小而不同。
You can use grips to specify compression spring diameter or wire diameter.
您可以使用掣点来指定压缩弹簧直径或线材直径。
About coil lead wire raise up range, it is limited as a part of lead wire diameter.
关于线圈引线提高的范围，它是有限的导线直径的一部分。
Usage: suitable for auto starting motor commutator with big wire diameter and armature coil etc. wire spot welding.
用途：用途：适用汽车起动电机较大线径的换向器与电枢绕组等线的点焊。
General continuous annealing export should choose to die than actual need wire diameter 0.0015-0.0035 more appropriate.
一般连续退火出口模要选择比实际需要线径大0.0015—0.0035比较合适。
Welding current is transferred to the wire through the contact tip whose bore is slightly greater than the wire diameter.
焊接电流通过孔径稍大于焊丝直径的接触端传送到焊丝。
The present invention provides a surgical stapling device with staple driver that supports multiple wire diameter staples.
本发明公开了一种具有支撑多种丝径钉的钉驱动器的外科缝合装置。
Welding transformer applies new high efficient fence welding transformer with eight shifting grades that expand welding wire diameter range.
焊接变压器采用了新型高效焊网变压器，调档可分为八个级别，扩大了焊接丝径范围。
The effect of the wire diameter on rotating transfer was studied. The results show that the smaller the diameter, the more the stability of LMJ.
分析了焊丝直径对液流束稳定性的影响，指出焊丝直径越细旋转射流过渡的稳定性越强，为实现稳定的旋转射流过渡提供了理论依据。
This paper investigates the life of diamond wire and effects of process parameters on the reduction of the wire diameter, warp and surface roughness.
研究了金刚石线的寿命及各切割参数对线径减少量、翘曲度、表面粗糙度的影响。
Based on the theory of Fraunhofer diffraction and Babinet principle, a method is proposed for dynamically measuring fine-wire diameter using laser diffraction.
基于夫琅禾费衍射理论和巴比涅互补原理，提出了利用激光衍射对细丝直径进行动态测量的方法。
In the field operation, can cause annealed wire diameter necked, surface scratch, red copper wire, copper wire color, copper wire oxidation and so on some phenomenon.
在现场操作中，会造成退火后线径变细、表面划伤、铜线发红、铜线变色、铜线氧化等一些现象。
Objectives To assess the biocompatibility of the two kinds of different design and wire diameter gelatin coated Platinium Iridium(Pt Ir) stents in rabbit carotid arteries.
目的评估两种不同结构设计的国产铂-铱合金明胶蛋白涂层支架置入兔颈动脉后长期的生物相容性。
Because after annealing line is very soft, corresponding to different wire diameter to use appropriate tension weight, if wire diameter small tension is big, will be the wire diameter and thin.
因为退火后的线已经很软了，对应不同的的线径要采用合适的张力重量，如果线径小张力大，就会把线径拉细了。
Furthermore, the deposition rate increases per unit of welding current by decreasing wire diameter, and adjustment of the penetration depth is enabled by alternating current wave form and polarity.
减少焊丝直径，能提高熔敷效率，再加上使电流波形交流化，就可以调整熔深。
Each wire measures between 30 and 100 microns in length and only 1 micron in diameter.
每根硅线的长度在30至100微米(micron)之间，直径仅为1微米。
We must gauge the diameter of wire first.
我们必须先测量电线的直径。
Were the diameter of a wire smaller, its resistance would be increased.
如果电线的直径更小，它的阻力会增大。
The main factors influencing metal transfer are the component of flux, the shape of wire section, the diameter of wire, the thickness of the steel stripe, and the welding parameters.
影响熔滴过渡的主要因素是：药芯组成物、焊丝截面形状、焊丝直径和钢带厚度以及焊接工艺参数等。
The tensile strength of the mesh sheet is higher than that of the common mesh, and the diameter of the wire is not smaller than the diameter of the side wire.
加筋网片的拉伸强度高于普通网片，加筋丝直径一般不小于边丝直径。
This welding technology is constituted by the combination of welding wire composition, the diameter of a wire, and current waveform.
本焊接技术由焊丝成分、焊丝直径和电流波形的组合构成。
The diameter of a thin wire was obtained by measuring the shadow in the Fresnel diffraction zone.
通过细丝后在其后菲涅耳衍射区留下阴影，测量阴影宽度可得细丝直径；
The tensile strength of the reinforced heavy six Angle net is higher than that of the common mesh, and the diameter of the wire is not smaller than the diameter of the side wire.
加筋重型六角网的拉伸强度高于普通网片，加筋丝直径一般不小于边丝直径。
The effects of arc voltage, welding current and heat input on the weld appearance in submerged-arc welding(SAW) of A105 steel with small diameter welding wire were experimentally researched.
主要研究A105钢小直径焊丝埋弧焊时，电弧电压、焊接电流和焊接热输入对焊缝成形的影响。
When the breaking amount of wire in the 10 times of the wire rope diameter has surpassed 5%, you should change the wire rope.
当钢丝绳上的10倍直径长度范围内断丝根数大于总数的5%时，必须更换钢丝绳。
When the breaking amount of wire in the 10 times of the wire rope diameter has surpassed 5%, you should change the wire rope.
当钢丝绳上的10倍直径长度范围内断丝根数大于总数的5%时，必须更换钢丝绳。
应用推荐