Applying transfer matrix method to the complex rotor system, the critical speed and the vibrating model of a high - speed spinning winding chuck are analyzed.
将传递矩阵法应用于结构复杂的复合转子系统，对高速纺丝卷绕夹头的临界速度及其振型进行了理论推导与计算。
Furthermore, it posed concrete surface treatment, smearing method, winding manner of polythene gummed tape and some critical proceedings during execution.
并详尽的提出了具体表面处理、管道涂装方法、聚乙烯胶带的长缠绕方式和施工过程和应注意的事项。
Be directed to damp winding damp bar is calculated though multi circuit method, and a way to transfer data is offence to monitor damping winding.
同时针对阻尼绕组提出了用多回路法计算阻尼条电流，并提出一种数据传递方式实施对阻尼绕组的监测。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。
A multi circuit calculation method is suggested for calculation of the current of the damping winding bar and a method of data transfering is offered to monitor damping winding.
同时针对阻尼绕组提出了用多回路法计算阻尼条电流的方法，并提出一种数据传递方式实施对阻尼绕组的监测。
The method to check short-circuit point between parallel conductors in transformer winding by Gaussmeter and to repair fault point are introduced.
介绍了运用高斯计来探查变压器绕组内并联导线间短路点，并对故障点进行修复的方法。
The modeling method can be applied in other type of dual winding motor and multiphase motor.
这一建模方法可推广到双绕组其他类型的交流机或更多相电机。
This paper describes the control method of winding machine using microcomputers. The design principle and realization diagram of system hardware and system software is also given out.
本文介绍了采用微型计算机实现绕线机控制的方法，并给出了设计原理、系统硬件和软件的实现框图。
This paper presents a new transposed connecting method for the diamond airgap armature winding of the superconducting turbogenerator.
本文对超导汽轮发电机篮式气隙电枢绕组提出了一种新的换位联接方法。
A new measurement method for transformer winding deformation is proposed on the basis of ultrasonic reflection principle.
根据超声波反射的原理，提出了变压器绕组变形检测的新方法。
The features, applications and electromagnetic computing method of single and two layer winding were introduced.
介绍了单双层绕组的特点、应用情况及电磁计算的方法。
To decrease the effect of temperature on fiber coil, we adopted the technology and method of quadrupolar winding, and we have finished several fiber coils.
为了减小温度对光纤环的影响，我们采用了四机子绕线法，并且利用自行研制的半自动绕线机构完成了多个光纤环的绕制。
A calculation method of deriving the reactance voltage of multi-oil ducts cylindric winding is introduced by using relative magnetic leakage method. And the calculation examples are given here.
介绍了一种用相对漏磁法推导几种多油道圆筒式绕组的电抗电压的计算方法，并给出了计算实例。
It is of great significance to investigate and improve the detection method of stator winding inter-turn short circuit fault in induction motors.
定子绕组匝间短路是异步电动机常见故障之一，因此研究其检测方法具有重要意义。
This method provides a new idea for the detection of the internal stator winding fault in synchronous generator.
该方法为同步发电机定子绕组匝间短路故障诊断提供了新的思路。
This paper proposed a novel control method for implementing the tread winding of OTR tire, which features the central role of the upper computer in manufacturing process.
本文提出了一种以上位机为核心，充分利用上位机强大的运算能力和编程的灵活性来实现工程轮胎胎面仿形缠绕控制的方法。
By means of original parameter method, the stress on cylinder's winding area is analyzed, formula for total stress of the cylinder is obtained.
采用初参数法对贴板钢丝缠绕区筒体应力进行了分析，得到筒体总应力表达式。
In this paper, the author discusses the technical method of winding the zinc-plating steel strip in constant speed controlled by computer.
提出了采用计算机控制实现镀锌钢带以恒定速度卷绕的技术方法。
The filament winding using the new method was accurate and reliable in the string pattern.
应用上述方法设计的控制系统，使纤维缠绕机的纤维缠绕线型准确、可靠。
Uses the simplex winding polarity reversal method to realize the speed transformation.
采用单绕组变极方法实现速度变换。
The winding principle and calculation method for accurate winding pattern are also given.
对缠绕规律进行了研究，提出了精确缠绕线型的设计方法。
After comparing two temperature monitoring methods, a new stator resistance estimation method for stator winding temperature monitoring is presented.
文中比较了两种温度监测方法，提出了一种新的定子电阻估计方法，从而可以直接得到电机定子绕组的温度。
The special microcomputer software for calculation of slot electric field is worked out with fe method, and the field distribution in stator slot winding of large generator is calculated.
采用有限单元法，编制了适用于微机系统的槽部电场计算专用软件，计算了大型发电机定子线圈槽部电场的分布。
This paper introduces design theory and method of conduction Angle of every winding in switching reluctance motor's regulating system.
本文介绍了在开关磁阻电动机调速系统中对各相绕阻的导通角的设计原理和方法。
This paper introduces the filament winding principle of the toroidal vessels and gives the design method of the winding machine of the toroidal vessels.
介绍了环形容器的纤维缠绕成型的基本原理，提出了环形容器缠绕机设计方案，给出了环形容器缠绕成型的工艺方案。
The three most commonly used method of manufacturing FRP are Cross-winding process, continuous winding process and the centrifugal casting process.
国际上现有三种制造夹砂压力管的工艺方法。它们分别是，交叉缠绕工艺、连续缠绕工艺和离心浇铸工艺。
The three most commonly used method of manufacturing FRP are Cross-winding process, continuous winding process and the centrifugal casting process.
国际上现有三种制造夹砂压力管的工艺方法。它们分别是，交叉缠绕工艺、连续缠绕工艺和离心浇铸工艺。
应用推荐