This paper analyze the influence of grinding wheel surface characteristics and dressing on grinding roughness of surface.
本文分析了砂轮表面特性和修整对磨削表面粗糙度的影响；
Especially, this paper is to deal with the effect of the dressing parameters on the grinding wheel surface topography, and, by means o...
本文主要论述修整参数对砂轮表面地形的影响，借助微型计算机和透射电子显微镜还对高速低粗糙度磨削机理进行了一些探讨。
Portable grinding tools need to be equipped with safety guards to protect workers not only from the moving wheel surface, but also from flying fragments in case of breakage.
便携式研磨工具应装有安全防护装置，这样不仅可防止工人接触运转的砂轮表面，而且他们也不会被破裂时飞溅的碎片击中。
Especially, this paper is to deal with the effect of the dressing parameters on the grinding wheel surface topography, and, by means of microcomputer and electronic microscope, the mechanism of...
本文主要论述修整参数对砂轮表面地形的影响，借助微型计算机和透射电子显微镜还对高速低粗糙度磨削机理进行了一些探讨。
On a slick surface, one wheel may have no traction and begin to spin.
在光滑的地面，一个车轮会丧失牵引力，开始空转。
Thus, working roller to perform uniform accurate grinding has not become true for roller surface rigidity and ORG grinding wheel rigidity fluctuating result in excessive or deficient roller grinding.
因此，当轧辊表面硬度波动及OR G砂轮硬度波动时常发生轧辊修磨过大或修磨不足等问题，还不能实现工作辊均匀精度修磨。
Cylinders, straight cups, and flaring cups are used for surface grinding with the end face of the wheel.
用其端面进行表面磨削的圆柱、直杯及外展杯状砂轮。
For this reason, the speed of a grinding wheel should not exceed the safe surface speed limit specified by the manufacturer.
基于此原因，砂轮的速度不应超过制造商规定的安全表面速度的限制。
SHOULDER: Defect found on rib or outer diameter; a raised edge on rib face caused by grinding wheel; raised surface at either end of outer diameter raceway.
挡肩：外径或挡肩上发现的缺陷；挡肩上由于磨床砂轮所造成的突起；在外径滚道两端的突起。
The anti-lock brake principle, regulating braking pressure output properties in accordance with condition of road surface so as to control the wheel slip ratio in idea scope, is put forward.
提出了针对路面条件通过控制器调节制动压力输出特性使车轮滑移率处于理想的范围，以实现防抱死制动的原理。
As you can see, this method can be applied only when the surface to be ground is shorter than the width of the grinding wheel used.
正如料想的那样，这种方法只在要磨削表面比所用砂轮宽度短时才使用。
Introducing influence of grinding wheel on machining surface quality and grinding force when stainless steel gasket ground by combined grinding wheel.
介绍了组合砂轮磨削不锈钢垫片时砂轮对加工表面质量和磨削力的影响。
This article researched the relationship between balance precision of the grinding wheel and the ground surface roughness.
通过实验，对砂轮平衡精度与磨削加工工件表面粗糙度之间关系作了深入的研究。
The surface of work table is equipped with equispaced universal wheel to support the glass which need be edged.
本机由主机用工作台组成，工作台上表面装有均布的万向轮，用于支承需要磨削棱边的玻璃。
In the manufacture of pottery, they will use the pottery wheel to make pottery surface smooth, delicate.
在制造陶器时，他们会使用陶轮，使陶器的表面光滑、细腻。
The results showed that, with appropriate wheel vibration frequency or appropriate workpiece rotate speed, the surface precision of workpiece can be improved.
结果表明：合理选择砂轮振动频率或工件主轴转速能有效提高工件表面精度，降低表面波纹度。
The experimental results show that the method improves the efficiency and quality of aluminum alloy wheel(aluminum wheel) surface, and verifies the rationality of the force controller.
实验结果表明，该方法有效提高了铝合金汽车轮毂（铝轮）曲面抛光的质量和效率，验证了力控制器设计的合理性。
According to the research on wheel structure, the random distribution of grains of wheel is an important factor producing better roughness on ground surface.
在研究砂轮结构的基础上得出砂轮磨粒分布的随机性是磨削加工能产生表面低粗糙度值的重要因素。
The metallic bond diamond wheel can process hard brittle material of complex surface, it can be high efficiency, precision and large-tonnage scale.
使用金属结合剂金刚石成形砂轮可实现复杂型面硬脆材料的精密、高效、量产化加工。
Grinding gear with the toroidal involute interior thread worm grind wheel is a new kind of process in hard surface gear finish machining.
渐开面包络环面内螺纹蜗杆砂轮磨齿，是一种硬齿面齿轮精加工的新型工艺。
Visual universal Wheel Dresser adaptable on surface grinder and universal tool grinder.
透视砂轮修整器，适用于平面磨床，和万能工具磨床。
The product has strong decontamination, it quickly removes pitch, grease, dirt form car finish and wheel. It also clean and gloss over the surface.
本产品具有特强去污能力，能迅速清除汽车、摩托车、合金框其表面的柏油及油渍污垢，并同时具上光效果，能令阁下座驾洁净光亮。
Experimental results show that the grain size of diamond grinding wheel and grinding depth have important influence on micro-topography such as geometrical shape and surface topography etc.
实验结果表明，金刚石砂轮磨粒尺寸和磨削深度对磨削表面的微观形貌如几何形态和表面纹理具有重要影响。
The force and temperature of polycrystalline diamond grinding with diamond wheel are tested and analyzed, the machined surface is investigated with scanning electron microscope.
首先对金刚石砂轮磨削加工聚晶金刚石的磨削力和磨削温度进行了测试和分析，利用扫描电镜对工件加工表面进行了微观分析研究。
It is found that the surface roughness influenced by wheel speed and grinding depth can be attributed to the changing of undeformed chip thickness.
研究发现：砂轮速度和磨削深度对表面粗糙度的影响都可归结为未变形切屑厚度的改变。
In this paper, the CBN grinding wheel of high efficiency, accuracy and surface quality was studied by means of low pressure abrasive water jet.
采用低压磨料水射流对高效率、高精度、高表面质量的CBN(立方氮化硼)砂轮进行了研究。
ASR can prevent excessive drive wheel spin on a slippery road surface during acceleration and maintain acceleration performance, steer ability and stability of vehicle.
汽车驱动防滑系统(asr)能够防止驱动轮在低附着路面上过度滑转，提高汽车的驱动性能和行驶方向稳定性。
The shape precision of grinding wheel affects the surface finish of work piece directly.
砂轮的形状精度直接影响着工件磨削表面质量。
The shape precision of grinding wheel affects the surface finish of work piece directly.
砂轮的形状精度直接影响着工件磨削表面质量。
应用推荐