Control system can meet various materials' welding requirements and has important engineering application values.
控制器可满足不同材料的焊接需要，有着重要的工程应用价值。
The use of cast steel enables a designer to take such steps as simplifying the structural connections and avoiding difficult welding requirements.
采用热模拟试验方法探讨了灰口铸铁焊接接头热影响区的奥氏体区组织对接头性能的影响。
The applications have proved that the control system features reasonable design, easy performance and complete satisfaction to the welding requirements.
实践证明该系统设计合理、操作方便，完全满足焊接技术的要求。
Welding at low environmental temperatures will be in accordance with class requirements.
在低温条件下的焊接应依照船级社的要求。
Give the detail requirements for welding spot, welding equipment and product inspection during welding.
给出了产品施焊中对施工现场、设备及产品检验的具体要求。
Pursuant to requirements in installation diagram (or points hanging diagram), pin boss components are fastened to the appointed rooting beam by bolts or in a welding way.
根据安装图(或吊点图)的要求，将销座组件用螺栓或焊接方式固定在指定的生根梁上。
Therefore, the steel is mainly used for low temperature impact of the impact of the components, welding structure and other requirements of higher strength components.
因此，镇静钢材主要用于低温下承受冲击的构件、焊接结构及其他要求强度较高的构件。
Al - alloys have special requirements on MIG welding due to their unique physical and chemical properties.
铝合金因其独特的物理、化学性能对mig焊有特殊的要求。
The experimental results show that the system can obtain a high localization precision to meet the requirements of preparation for locally autonomous welding during remote welding process.
实验结果表明，虚拟环境标定系统达到了较高的定位精度，可以满足遥控焊接过程中局部自主焊接准备工作的需要。
If either of the additional test specimens does not comply with the requirements, the welding procedure test has failed.
如果附加试样的任何一个不符合要求，此焊接试验已经失败。
Fabrication technology and deformation control measures, which can meet requirements of specifications without need of corrections after welding, for the steel box members are expounded.
本文介绍了该钢箱杆件的制造工艺及不需焊后矫正就能达到规范要求的变形控制措施。
The welding current control for inverter source is the key that meets requirements of varied welding processes and ensures the operation stability and reliability.
弧焊逆变电源输出电流控制是满足不同焊接工艺需求和保证电源可靠运行的关键。
The welding preparation of city gas pipeline, welding technological requirements and control for factors effecting welding quality are analyzed.
分析了城市燃气管道的焊前准备、焊接工艺要求以及对影响焊接质量诸因素的控制。
The welding conditions have to meet the requirements of class and Owners inspections. Welding shall be carried out under dry and clean conditions, weather protected as far as possible.
焊接条件需要满足船东和船级社的检验要求。焊接需要在干燥和清洁条件下进行，尽量进行露天保护。
The result shows that if only we do strictly according to the welding technics requirements and adopt reasonable welding method, crack in neck of hollow shaft can be repaired well.
结果表明只要严格按照焊接工艺要求，采取合理的焊接方法能使中空轴轴颈裂纹得到很好的修复。
The welding experiments show that the new machine can meet the requirements of ellipse tracking and be worthy to speed the production applications.
试验表明，新型焊机可满足椭圆轨迹的焊接要求，且方便换型，具有较大的推广应用价值。
The photograph and mechanical robustness tests show that the welding joints have no internal defects and accord with the technical requirements.
经拍片和机械强度检验，证明焊接接头无内部缺陷并符合技术要求。
With the more wide use of stainless steels in various fields, there are higher requirements on the welding quality of stainless steels.
不锈钢得到越来越广泛应用的同时对其焊接性能也提出越来越高的要求。
The power experiment proved that the simulation results are exact and the digital welding inverter developed by us accords with the design requirements and can meet the need of welding process.
功率负载的实验表明，仿真结果准确，本文研制的数字化弧焊逆变电源符合设计要求，满足焊接工艺的需要。
First, prepare WPS, and then press WPS welding process evaluation, PQR report form, only the welding procedure qualification requirements, WPS can be used in the products of welding.
先编制WPS，然后按WPS做焊接工艺评定，形成PQR报告，只有焊接工艺评定符合要求，WPS才能用在产品的焊接上。
This article illuminates the process and characteristic of double-wire MAG welding from requirements of welding machine, gas, metal transfer control and welding process.
从其焊接设备的要求、 保护气体以及其熔滴过渡控制、焊接过程等几个方面，详细介绍双丝MAG焊的工艺及其特点。
The gap control device to ensure the weld seam welding space meet the requirements, diameter, misalignment and weld gap have been strictly controlled.
采用焊缝间隙控制装置来保证焊缝间隙满足焊接要求，管径，错边量和焊缝间隙都得到严格的控制。
Make sure the execution comprehensive quality requirements and welding criterion strictly in accordance with EN 15085.
确保所有的焊接质量要求和EN 15085体系要求得到有效的执行；
Through the analysis of the requirements and influence factor in physics and chemical properties and welding, the effective welding method was provided for aluminum and its alloys.
通过对铝及铝合金的理化性能及焊接方面的特殊要求、影响因素、预防措施等几个方面的分析，为此类材料的焊接提供了有效的焊接方法。
The process, with constant and minimum elongation of strip steel edge, can meet the requirements of expanding varieties and sizes with higher welding speed.
该法可使带钢边部的伸长量最小和尺寸处于稳定状态，并可满足扩大中小径直缝电焊管的规格品种和提高焊速的要求。
It shows by the process that the equipment can meet the requirements of flashing butt welding.
工艺试验表明，该设备能实现脉冲闪光对焊的要求，焊接接头能够满足使用要求。
When impact requirements apply, the upper limit of heat input qualified is 25 % greater than that used in welding the test piece.
当采用冲击要求时，适合的热输入的上限比试件焊接时使用的热输入大25%。
The frame of heavy stay column sets for Dongjiang Power Station possesses a great rigidity with large dimension, so its requirements for welds quality and welding deformation are strict.
东江电站大型灯泡贯流式机组机座结构尺寸大、刚性大，对焊缝质量和焊接变形要求较高。
Experiments showed that HIC properties of welding joints for the newly-developed wires can meet the requirements concerned.
试验结果表明，两种研制焊丝的接头抗h IC性能均能满足有关要求。
Shield sets the dimensional accuracy and the shape of higher tolerance, the welding seam is also very strict quality requirements.
屏蔽套的尺寸精度及形状公差要求较高，焊缝的焊接质量要求也很严格。
应用推荐