Design standard of automobile body welding procedure affects the product quality and the cost greatly.
轿车四大工艺之一的车身焊接工艺，其设计水平对产品质量和成本有较大影响。
To ensure the quality of welding products, welding procedure evaluation must be made before welding construction.
为确保产品的焊接质量，在正式焊接施工前必须进行焊接工艺评定。
A well selected welding procedure can not only result in high welding speed, high welding quality, but also good economic benefit.
一个好的焊接工艺方案，对加快焊接速度、确保焊接质量、提高经济效益都起着积极的作用。
The welding procedure is strictly observed during tank welding process, thus the welding quality is guaranteed and the welding efficiency is increased.
施焊过程中通过严格执行工艺规范，既保证了焊接质量又提高了焊接效率。
Spot welding procedure of copper with inlaid filler metal sheet HL204 is introduced, too.
介绍了铜与铜镶嵌片状钎料HL204点焊的工艺方法。
A study was made of the welding procedure for X70-L245 butt joint of pipeline steel.
针对不同强度级别的管线钢x 70和L245对接的焊接工艺进行了研究。
This software applies to manage welding procedure qualification for steel pressure vessels.
该软件适用于钢制压力容器焊接工艺评定的各项管理工作。
It includes the testing method, the process and the result of welding procedure qualification.
其中包括焊接工艺评定的试验方法、过程和结果。
The high frequency welding procedure and its forming fundamental of spiral fin pipe is introduced.
介绍了螺旋翅片管高频焊接工艺及其成型基本原理。
The welding procedure of main pressure parts , its bulk heat treatment and checking point are detailed.
详细介绍了主要受压件的焊接工艺、整体消除焊接应力热处理技术以及关键的检验控制点。
The paper introduces the welder training, joint design, bevel preparation and welding procedure as well.
文中介绍了焊工培训、焊接接头坡口形式及焊接工艺。
According to the analyzed results, welding procedure was improved and cracks were restrained effectively.
根据分析结果，改进焊接工艺后，裂纹得到了有效的控制。
Combined the application of actual work, the welding procedure of industrial pure nickel pipe is discussed.
结合实际工作中的应用，针对工业纯镍的管材焊接工艺进行探讨。
The welding procedure of TC6 Titanium alloy is studied in this paper for welding and application of assembly.
根据TC 6钛合金组件的焊接和应用，研究了TC 6材料的焊接工艺性。
The test analysis showed that good welding quality was achieved when the proper welding procedure was applied.
试验分析表明，采用合适的工艺可以得到较好的焊接效果。
The upper limit of the qualification is the highest interpass temperature reached in the welding procedure test.
合格鉴定的上限为焊接工艺试验时达到的最高层间温度。
This paper introduces some welding procedure qualifications for spherical storage tanks, high pressure scrubbers.
本文介绍了几种典型压力容器：球形容器、高压洗涤器的焊接工艺评定。
ISSW developed here meets the basic requirements of spot welding procedure design from the results of mass tests.
工艺实验表明，本文所研制的ISSW可以满足点焊工艺设计基本要求。
All new welding procedure tests are to be carried out in accordance with this standard from the date of its issue.
自本标准出版日起，所有新的焊接工艺试验必须按本标准进行。
If either of the additional test specimens does not comply with the requirements, the welding procedure test has failed.
如果附加试样的任何一个不符合要求，此焊接试验已经失败。
There are many factors that can result in the welding deformation, like welding procedure or residual stress of the material.
引起焊接变形的因素较多，有可能是焊接工艺引起，也有可能是材料本身残余应力引起。
It successfully applies the real time control of welding procedure process on large power flash butt welding complete equipment.
成功地用于大功率闪光对焊成套设备的焊接工艺过程实时控制。
So it is essential to reinforce quality control and improve welding procedure in order to ensure the structural strength of bogies.
因此改善焊接工艺，加强质量管理，是保证焊接转向架结构强度的关键。
Welding temperature is the important parameter in welding procedure, and accurate measuring can improve welding quality and productivity.
焊接温度是焊管生产工艺中的重要参数，准确测量焊接温度对提高焊接质量和劳动生产率意义重大。
If welding procedure tests have been performed at both a high and a low heat input level, then all intermediate heat inputs are also qualified.
如果焊接工艺试验在高热输入值和低热输入值下进行，那么，中间的热输入也应合格。
The qualified welding procedure has successfully been used for the welding of the P91 steel furnace tubes in three ethylene cracking furnaces.
并依此制定工艺，成功地完成了该钢种在三台乙烯裂解炉中的焊接应用。
The necessity for welding crane rails is analyzed; weldability discussed and welding procedure worked out. The product is successfully welded, too.
论述了起重机轨道焊接的必要性，分析了其焊接性，拟定了焊接工艺并成功地焊接了产品。
The results showed that electrode by cryogenic treatment could visibly improve the spot welding procedure and raise joint strength for galvanized sheet.
试验结果表明：电极深冷处理改善了镀锌钢板点焊工艺，提高了点焊接头强度，从而提高了点焊质量。
Interface bonding strength of clad transition joints welded in two different welding procedures is compared and a proper welding procedure is determined.
对两组不同焊接规范下复合过渡接头的界面结合强度进行了对比，确定了合适的焊接工艺参数。
Weldability of WT-62CF steel both for inland and for plateau uses are proved from experiments. The reliable welding procedure and QA measures are drawn up.
论证了WT-62CF钢在内地和高原现场的焊接性，制定了可靠的焊接工艺及质量保证措施。
应用推荐