Based on the metal melt and vaporized interface 2d propagation mechanism, this paper founds the pulsed laser welding model.
基于金属材料熔化、汽化界面二维扩展机制建立了脉冲激光的焊接模型。
The results show that welding model can be developed easily by FLUENT and it outcome can describe the influence of different driving force clearly.
结果表明，Fluent可以很方便的对焊接工艺过程进行模拟，其输出的计算结果可以直观的揭示各种驱动力对于焊接过程的影响。
At the same time, analyze the welding deformation of straight-line segment model of side rail, and compare the results with test data, verify this method is efficient.
同时，针对汽车纵梁部分直线段模型进行焊接变形分析，并与试验数据进行了对比，验证了该方法的有效性。
It is based on the mathematical model of GMA welding system and Halmoy's wire melting model.
利用该数学模型模拟焊接电流、弧长和焊丝伸出长度随时间的变化规律。
On the basis of model selection from the pieces tested and according to elastic mechanics, the relation between minute displacement and welding residual stress is deduced.
对所测试件选取适当的模型，应用弹性力学理论，推导出微小位移与焊接残余应力的关系式。
The continuous extrusion model with welding dies functions well with puller systems and other automated handling equipment.
它可拥有一个连续挤压的模式，因为有柱锭焊接技术，还有牵引系统和其它自动化的挤压配套设备。
Note about the shape of the need to model to the, steel welding, outside a layer of steel wire net, and then began to shape the base layer to paint.
注意需要塑出大概的形状臧，钢筋焊好之后，在外面扎一层钢丝网，然后开始塑造基础层粉刷。
The result shows that the method is available to model the TIG welding dynamic process.
结果表明，用该方法对TIG焊过程建模是有效的。
Experimental result shows that the regression model has high precision and stronger practicability, which offers proof for quality reliability of CO2 automatic welding.
试验证明，该回归模型具有很高的精度和较强的实用性，为保证CO2全自动焊接质量的可靠性提供了依据。
A numerical method is presented for the two dimensional quasi steady state heat transfer on high power density laser welding processes according to the keyhole model.
对高能量密度激光匙孔焊接过程的二维准稳态传热进行了计算方法的研究。
Model of spatial surface can make robot automatically build model of welding and finish the manipulation of welding and grinding in condition of being taught by people limitedly.
空间曲面建模可以使焊接机器人在有限示教的条件下自动建立焊接模型并精确完成焊接和磨削操作。
In this paper, the diffusion model and the theoretic calculation method of welding dust are given by gradient transportation theory and box model for outdoor atmospheric pollutants.
这里利用成熟的室外大气污染物扩散理论- 梯度输送理论和箱模式理论，提出焊接烟尘在室内的扩散模式和浓度分布的理论计算方法。
The mathematic model of transient thermal process in welding is established to simulate the moving of the heat source.
建立焊接瞬态温度分布数学模型，解决焊接热源移动的数学模拟问题。
The joint deformation of DC upset butt welding was studied by using theory of plastic deformation and rigid-viscosity plastic material model.
采用塑性变形理论和刚粘塑性材料模型研究了直流电阻对焊接头的塑性变形。
A mathematical model of fume diffusion in welding process was founded by considering welding arc as a spot source of generating fume and supplying the turbulent diffusion theory.
把焊接电弧作为一个发尘点源，应用大气湍流扩散理论，建立了焊接过程中烟尘扩散的数学模型。
An inputting model of welding symbol information is put forward in this paper.
本文提出了一种焊缝标注信息输入模型。
The International uniform welder and welding practitioner (IWP) training guideline, examination standards provide the new model for training of welding practical personnel in China.
国际统一的焊工、焊接技士培训规程和焊工考试标准，为我国焊接技能型人才的培养提供了新的思路和培养模式。
The key to a successful calculation and prediction of welding process by mathematical model method is the selecting of an appropriate model and its parameters.
用数学模型方法进行焊接过程的计算和预测，关键是选取合适的计算模型和模型参数。
Considering the physical process of MIG welding, the numerical analysis model of the fluid flow and the temperature field has been developed.
综合考虑MIG焊接物理过程，建立了MIG焊接熔池流场和温度场的数值分析模型。
According to the model of the welding position, giving a weld seam point, the weld orientation then can be resolved from the weld rotation Angle and the weld slope Angle.
根据焊缝位置的数学模型，得到了描述焊缝焊接位置的参数——焊缝转角和焊缝倾角与焊缝姿态的关系。
Stored energy welding technology for large cavity devices is described in detail. Basic elements of welding are discussed and a welding energy model is established.
阐述了大腔体器件的储能焊焊接技术，讨论了焊接基本要素，建立了焊接能量模型。
A new developed instrument Model CSY-1 for measuring wire feed rate in MIG and MAG welding and for detecting quality in welding process is given.
新研制的、适用在MIG、MAG焊接中，作测定送丝速度和在焊接生产中作质量检测的CSY一1型测量仪。
RBF Network and SVM model are used to set up the image model of arc sound signal and welding state in order to realize the pattern recognition on-line of the welding conditions.
利用R BF人工神经网络及SVM模型建立电弧声信号与焊接状态的映射模型，从而实现焊接过程状态的模式识别。
Probabilistic distribution model for welding flaws undetected, material mechanical properties and internal pressure of welded steel pipe are investigated.
笔者研究并建立了焊接钢管焊缝漏检缺陷的概率分布模型及材料性能、输送压力的概率分布模型；
The GBE model for simulation of grain structures in welding pool is introduced.
介绍了焊接熔池组织模拟的GBE模型。
Based on Linear interfacial Fracture Mechanics, a new welding joint model-multi layered interfacial model is proposed in this paper.
基于线性界面断裂力学，提出了焊接接头的新模型—多层模型。
The mathematical model of typical saddle-shape weld was established, and the welding pose parameters were calculated with MATLAB.
针对典型的马鞍形焊缝进行数学建模，并利用MATLAB软件计算焊接位姿参数。
Three control modes have been worked out, such as time-control, deformation-control and power-peak control. Each model realizes automatic control in linear friction welding.
采用时间控制、变形量控制和功率峰值控制三种控制方式实现了焊接过程的自动控制。
The mathematical model of typical saddle-shape weld was established, and the welding pose parameters were calculated with MATLAB.
针对典型的马鞍形焊缝进行数学建模，并利用MATLAB软件计算焊接位姿参数。
The mathematical model of typical saddle-shape weld was established, and the welding pose parameters were calculated with MATLAB.
针对典型的马鞍形焊缝进行数学建模，并利用MATLAB软件计算焊接位姿参数。
应用推荐