The welding distortion of these structure is too serious.
这些结构的焊接变形太严重了。
The methods of welding distortion prediction are largely based on finite element analysis.
焊接变形预测方法大都基于有限元分析。
The minimum welding distortion was obtained by the combination of static and dynamic thermal tensioning.
静态与动态温差拉伸结合使用，获得了最小的焊接变形。
The prediction and controlling of welding distortion and residual stress is still a very important project in the industry.
焊接变形和残余应力的预测和控制至今仍然是工业生产中需要解决的重要课题。
Two methods of welding distortion straightening technique are summed up from plate model and applied to some conventional welding distortion treatment.
以钢板对接为例，提出了焊接变形高效矫正法的两条途径，并将其应用于几种常见的焊接变形矫正中。
The mechanical factors for the property of welding joint are welding defects, discontinuity of joint shape, welding residual stress and welding distortion.
通常，影响焊接接头性能的力学因素有焊接缺陷、接头形状的不连续性、焊接残余应力以及焊接变形。
The technique using thermal tensioning and trailing intense cooling simultaneously to reduce welding distortion was investigated by both numerical simulation and experiments.
对温差拉伸和随焊激冷配合使用控制铝合金薄板焊接变形的联合工艺进行了数值模拟和试验研究。
Effectiveness of reducing welding distortion by trailing intensive cooling and the influence of heat - dissipating condition of the fixture on such effectiveness were studied.
研究了随焊激冷减小铝合金薄板焊接变形的效果及夹具的散热条件对该效果的影响。
This paper mainly describes the structure of DJ1 bogie side frame and analyzes its distortion characteristic. The controlling technology of welding distortion has also been presented.
介绍了DJ 1构架侧梁的结构，分析了其焊接变形特点，阐述了控制构架侧梁焊接变形的工艺措施。
The theory of residual plastic strain can be used to predict the distortion of simple components, and the reverse deformation is an effective method for controlling the welding distortion.
通过对实例的分析，表明对于简单构件的激光焊接，残余塑变理论可以用来预测变形，反变形法是控制焊接变形的有效方法。
The distortion tendency under different welding method, sequence and parameters are compared so that the basis of selecting optimum welding method to prevent welding distortion is provided.
通过不同的焊接方法、焊接顺序和工艺参数下焊接变形趋势的比较，为选择最佳的焊接方法和工艺提供了依据。
This article discusses how to prevent and lessen welding distortion during welding producing from many aspect such as welding seam length and size, welding form, welding surface size, welding method.
论述在焊接生产中，如何防止和减少焊接变形，并在焊缝长短、焊缝大小、焊接形式、焊接面大小、焊接方法方面加以探索。
These jigs are essential to ensure the best quality welds and the minimum of distortion during the welding process.
这些夹具是必不可少的，以确保最优质的焊接变形和焊接过程中最低。
The waterproof layer of the lap joint should stick (welding) firm, tight sealing, no distortion, fold, curling and blister defects.
卷材屋顶防水层的搭接缝应粘(焊)结牢固，密封精密，不得有扭曲、皱折、翘边和起泡等缺陷。
The paper introduces the measure for controlling the weld distortion of huge crane beam and the procedure for assembling and welding of the beam.
介绍了焊接超大型吊车梁时控制焊接变形的措施以及为此而制定的装焊工艺。
The welding and assembling process of heavy girder often results in twisting distortion.
大型薄壁梁在焊接拼装过程中常常会出现扭转变形。
The effects of distortion control in welding thin aluminum alloy plates by two kinds of thermal tensioning were investigated.
对两种形式的温差拉伸控制铝合金薄板焊接残余变形的效果和规律进行了研究。
During the measurement of welding contraction distortion for stator in a large hydropower station, the method is used well.
在对某大型水电站焊接收缩变形测量中，该方法得到了很好的应用。
Therefore, optimizing welding parameters was a valid means to minish and control welding residual stress and distortion.
因此，优化焊接工艺参数是减小、控制焊接残余变形和残余应力一种有效手段。
New idea to control welding residual stress and distortion with trailing impactive electromagnetic force was given.
提出了基于脉冲电磁力随焊控制焊接应力及变形新方法。
Electron beam welding has significant keyhole effect, it induces the electron beam welding different from general melting, and also important influence on its welding stresses and distortion.
电子束焊接具有显著的小孔效应，这一特点决定着电子束焊接过程和普通熔化焊不同，并对其焊接应力和变形产生重要影响。
This article introduces an innovative technology of mini-mobiles rear axle casing, namely a non-machining little distortion welding technology.
介绍了微车后桥壳焊接的一种新工艺，即是小变形不加工的焊接技术。
The paper introduces the difficulties of roller spray welding technique such as controlling for distortion, keeping for layer evenness and dimension of roller diameter.
就轧辊喷焊的技术关键问题：变形控制，涂层均匀性的控制，喷焊后辊子外径尺寸控制及轧辊的组焊工艺等，作以介绍。
Being aimed at distortion of side plate for welding case of electronic equipment, this paper puts forward a new method to straighten distortion by using resistance heat which produced by spot welding.
本文针对焊接机柜加工中产生的侧板波浪变形，提出了一种运用点焊产生的电阻热来矫正变形的新方法。
Electron Beam welding (EBW) is a mature welding process which offers many advantages in terms of weld productivity, avoidance of distortion and minimal metallurgical disturbance.
电子束焊接(EBW)是一种技术成熟的焊接方法，它给焊接生产提供了很多便利条件，避免了材料的变形并且使冶金变化的影响减到最小。
The practice have proved that the anti -distortion plus with rigid fixing are the effective measures for controlling the distortions of this huge welding structure.
实践表明，反变形法和加支撑刚性固定是控制这种大型特厚壁结构焊接变形的有效方法。
Controlling for the variables related, preventing the crriage from cracking during welding and correcting distortion for it after welding are discussed, too.
提出了焊接过程中产生裂纹的控制方法及对焊后变形的矫正方法。
This paper studied mainly multi-T joint test data. By analysis test data, gave experience equation for transverse distortion of T-joint welding structure.
本文重点分析了多个T形接头焊接的工艺试验结果，通过对试验数据的分析，得出了对T形接头焊接构件的横向变形的经验公式。
This paper studied mainly multi-T joint test data. By analysis test data, gave experience equation for transverse distortion of T-joint welding structure.
本文重点分析了多个T形接头焊接的工艺试验结果，通过对试验数据的分析，得出了对T形接头焊接构件的横向变形的经验公式。
应用推荐