The rational welding conditions are determined by tests.
并通过工艺试验确定了合理焊接规范参数。
The toughness of HAZ is higher than base metal under appropriate laser welding conditions.
在合适的激光焊接条件下，热影响区韧性高于母材；
High Quality Double Dipped Impregnated Main Transformer - Provides long life in harsh welding conditions.
高质量的两次浸漆变压器——在恶劣焊接环境中保证较长的使用寿命。
Adjustable "Crater" control - Gives the operator control over welding conditions at the start and end of welds for improved weld quality.
可连续调节的收弧控制——在任何焊接条件下收弧均能获得高质量的焊缝。
The arc forces of typical electrodes under common welding conditions were measured and the factors affecting the forces were also investigated.
测定了典型焊条在正常规范下的电弧力，研究了影响因素。
Therefore, during the welding process the welding parameters should be changed appropriately, and the welding conditions should be adjusted too.
因此在焊接过程中应该适当改变焊接工艺参数，调整焊接规范。
For both aluminum alloy and magnesium alloy, a sound joint can be obtained under appropriate welding conditions using the process method of ultrasonic brazing.
采用一定的钎料对铝合金、镁合金进行超声波钎焊能较好提高其接头力学性能。
It is proved that the new control method can obviously reduce the spattering loss, improve the weld formation and broaden the criteria of the optimum welding conditions.
新控制法可以明显地减小飞溅，改善焊缝成形和扩大合理的焊接规范区。
RBF Network and SVM model are used to set up the image model of arc sound signal and welding state in order to realize the pattern recognition on-line of the welding conditions.
利用R BF人工神经网络及SVM模型建立电弧声信号与焊接状态的映射模型，从而实现焊接过程状态的模式识别。
The sufficient argon protecting, the strict control of welding parameters and appropriate welding conditions are important techniques of improving the welding quality of P91 steel.
阐述了提高P91钢现场焊接质量的主要技术措施是保证可靠的充氩保护效果、严格控制和选择合适的焊接参数。
The welding conditions have to meet the requirements of class and Owners inspections. Welding shall be carried out under dry and clean conditions, weather protected as far as possible.
焊接条件需要满足船东和船级社的检验要求。焊接需要在干燥和清洁条件下进行，尽量进行露天保护。
The results shown that a deformation-free joint with good weld surface appearance can be obtained with suitable welding conditions for butt-joint and lap-joint of the dissimilar materials.
结果表明，当焊接工艺参数合适时，可以获得表面成形良好、无变形的铝合金与钢的对接接头和搭接接头。
The pipe with original welding residual stresses is analyzed under different conditions of PWHT.
对存在原始焊接残余应力的管接头在不同的热处理条件下进行分析。
When designing jointing part, on one hand some requires of structure intensity and working conditions are considered, on the other hand, some characters of welding technics are also considered.
设计焊接结构件时，一方面要考虑结构强度和工作条件等性能的要求，另一方面还要考虑到焊接工艺过程的特点。
Parameters of butt fusion welding of plastic pressure-pipe are different for varying pipe diameters and ambient conditions, and it is also affected by personal factor.
塑料压力管道热熔对接焊的工艺参数随管道尺寸和环境条件的不同而不同，同时还受人为因素的影响。
The influences of basic metal chemical composition, heat treatment conditions and welding parameters on the pressure vessel brittle fracture have been investigated.
研究了诸如化学成分、热处理条件和焊接因素对压力容器脆性破坏的影响。
Three measures to solve the problems of boundary effect in explosive welding are put forward and their application conditions, advantages and disadvantagess ave illustrated respectively.
提出了解决爆炸焊接中边界效应问题的三条措施，并说明了各自的适用条件和优缺点。
Experiments were conducted under the conditions of TIG welding with small current and thin plates. The desired dada was extracted.
在小电流薄板脉冲TIG焊接全熔透的试验条件下进行了试验，并获得了所需数据。
English Name:Welding consumables -- Technical delivery conditions for welding filler materials -- Type of product, dimensions, tolerances and markings.
简体中文标题：焊接消耗品。焊接填充材料的交货技术条件。产品类型、尺寸、公差和标记。
Abstract: Study on the sensitivity of stomatal A5083 Aluminum Alloy under different humidity conditions of welding, and the effects of porosity on the mechanical properties.
摘要：研究了不同湿度条件下A 5083铝合金焊接气孔的敏感性，并讨论了气孔对焊缝力学性能的影响。
In this paper, the history and present conditions of welding robot in domestic and foreign situation were summarized, the latest development in technology was discussed.
文中对焊接机器人的应用现状、发展趋势、相关技术进行了概述分析。
According to the principle of thru the partition (TTP) welding test result and by analysis of processing conditions of TTP welding, the rules which should be followed in welding have been presented.
根据穿壁焊原理和试验，通过对穿壁焊工艺条件的分析，指出焊接所应遵循的规律。
A new solid state welding technique is discussed in this paper. It means that the materials will be joined at solid state under certain deformation conditions after the surfaces are quenched by laser.
探讨一种新的固态焊接技术，即对待焊接面激光处理后，再在一定变形条件下实施固态压接。
The results show that the wear resistance of built up welding surface of Zn based al alloys are better than that of matrix under the same conditions.
结果表明，在相同条件下，锌铝合金堆焊层的耐磨性高于同种材料母材的耐磨性。
Welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerances and markings.
焊接消耗品。焊接用填充材料的交货技术条件。产品型式、尺寸、公差和标志。
External radiation from thoriated tungsten electrodes during storage, welding, or disposal of residues is negligible under normal conditions.
正常条件下，在储存、焊接、处置残留物时，钍钨电极的外辐射可以忽略。
English Name: welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and markings.
简体中文标题：焊接消耗品。焊接填充金属的交货技术条件。产品的类型、尺寸、公差和标记。
The spot welding tests prove the microcomputer control system has satisfactory constant current monitoring effect under different main voltage and load conditions.
并通过不同网压和不同负载下的点焊试验，证明该微机系统可获得满意的恒流监控效果。
Based on the study conditions, we study the stamping and welding centrifugal pump of impeller design methods, optimization methods and manufacturing processes.
本文基于上述状况，针对冲压焊接离心泵叶轮的水力设计、制造工艺和优化方法等方面进行了研究。
Based on the study conditions, we study the stamping and welding centrifugal pump of impeller design methods, optimization methods and manufacturing processes.
本文基于上述状况，针对冲压焊接离心泵叶轮的水力设计、制造工艺和优化方法等方面进行了研究。
应用推荐