Switch function for long welding cable and shore welding cable.
具有加长焊接电缆和短电缆转换功能。
Products are widely used in soft LCM module production and welding cable.
产品广泛应用于LCM模块生产和软性排线焊接等。
The power cord and welding cable were used to provide power to the wire feeder and control system.
电源线和焊接电缆构成电源回路，为送丝机和控制系统提供电能。
Hollow structure arms, wrists, welding cable built-in, available in a narrow space welding operations, light weight, compact structure.
采用中空型结构手臂、手腕，焊接电缆内置，可在狭窄空间焊接作业，重量轻便，结构紧凑。
First confirmation of welding cable clamp and copper ears have reliable connectivity, will bolt copper ears, and welder polarity "-" reliable output link.
先确认电缆与焊钳和铜线耳已可靠连接，用螺栓将铜线耳和焊机极性为“-”的输出端可靠地连接在一起。
In case the welding machine cannot be placed close to the welding area, enough cable length for both, the welding cable as well as the earth clamp has to be provided.
如果焊机不能置于靠近焊接区，必须提供足够长度的焊接线以及接地夹。
Electric welding machine cable [1] (YH cable) full of high strength rubber sleeve electric welding cable, commonly known as welding wire, is a YC cable (general rubber cable).
电焊机电缆[1]（YH电缆）全称高强度橡套电焊机电缆，俗称焊把线，是YC电缆（通用橡套电缆）的一种。
When welding current is fixed, some important information such as length and section area of welding cable, connection of ground wire can be shown by output voltage of instantaneous arc-striking.
在焊接电流确定的条件下，引弧瞬间的焊机输出电压反映了焊接电缆长度、截面积以及地线连接情况等重要信息。
It transmits a laser beam through an optical cable to a robot, which angles lenses and mirrors in the end of its arm to aim the laser towards the parts that need welding.
它通过光导电缆发射激光给机器人，机器人用它手臂末端的角度透镜和镜子对准激光点焊接。
For the electric welding machine two secondary side wiring and electrode holder, welding connection cable, its characteristic is high, low voltage resistance.
用于电焊机二次侧接线及连接电焊钳、电焊机的专用电缆，其特性是电阻大、电压低。
Heating cable cross: must be used in explosive situations linear supporting proof junction box, the general situation can also be used splice or welding.
伴热电缆的交叉：在易燃易爆场合必须采用配套的防爆直线型接线盒，一般场合也可以采用绞接或焊接。
Cooling prevents the power cable, torch or gun and consumables from overheating and also protects the welding operator from injury.
防止电力电缆冷却、火炬或枪、消耗品过热保护焊，也算伤害。
Principle of exothermic welding technique, properties of welding joint of cathodic protection cable and cost economization of the process are discussed, too.
介绍了铝热焊接技术的原理、阴极保护电缆焊接接头的性能及经济效果。
After the erection of cable tray and the supports, the welding points and supports should be painted, and the final paint for them should be of the color to the self-color of the tray.
桥架及其支架等安装完毕后，对焊点和支架要进行防腐处理，并喷涂一层和桥架本色相同的面漆。
In view of the special structure of the coaxial RF cable, several kinds of possible welding procedures are discussed in this paper.
本文针对射频同轴电缆结构的特殊性讨论了多种可能的焊接工艺。
The miniature coaxial cable with corrugated copper-tube outer conductor that is manufactured using laser welding process offers satisfied results in both electrical and m…
激光焊接法生产的微小型皱纹铜管外导体同轴电缆，在电性能和机械性能方面都取得了令人满意的效果。
Each hoop cable is fixedly connected with the cylindrical or conical drum body at intervals of arc distance through the welding method.
每根箍索每隔一段弧距通过焊接方法以圆柱或圆锥状的鼓身固定连接。
Even with resistive loads, the capacitance of a shielded connecting cable may cause relay welding.
即使对于电阻性负载，屏蔽电缆的电容也可能会导致继电器触点焊接。
The method and technology of oxyacetylene flame braze welding for main cable wrapping at Shantou Bay Bridge were introduced, and the difficulties of the welding were analyzed.
介绍汕头海湾大桥主缆缠丝所采用的氧-乙炔火焰钎接焊方法及其工艺，并对主缆缠丝焊接的难点进行了分析。
The EA1400N's hollow upper arm maintains the optimum bend radius of the welding torch cable, maximizing weld performance and extending cable life.
该EA1400N机器人的空心上臂保持这焊枪电缆的最佳弯曲半径，以最大限度地提高焊接性能和延长缆线的使用期限。
And some problems that should be noticed in the assembling process of RF cable assemblies, and the possible problem of inter conductor void-welding are also discussed.
探讨了在组装过程中应注意的问题，以及针对内导体焊接易出现虚焊问题进行研究。
The hoop cable, the welding joint and the groove of the drum body keep on a plane.
箍索及焊接连接点与鼓身的凹槽保持一个平面。
Flange into fixture in the mould, open switch will be 120 regional automatic welding, according to the size of the flange size to replace fixtures mold, cable length can be arbitrary adjustment.
支线自动焊好，根据法兰的大小规格来更换夹具模具，网线长度可任意调整。
The invention relates to a bolting and welding combined double-amplitude pulling plate cable beam anchoring structure of a cable-stayed bridge.
本发明涉及一种斜拉桥栓焊组合式双幅拉板索梁锚固结构。
In this paper the Submerged Arc Welding procedures for Q420E butt joint of Songhua River Stayed-cable Bridge were investigated.
对松花江斜拉大桥钢梁用q 42 0e厚板对接接头的埋弧焊焊接工艺进行了研究。
In this paper the Submerged Arc Welding procedures for Q420E butt joint of Songhua River Stayed-cable Bridge were investigated.
对松花江斜拉大桥钢梁用q 42 0e厚板对接接头的埋弧焊焊接工艺进行了研究。
应用推荐