End Connections? Choice of flanged, threaded or socket weld ends.
连接端口-可提供法兰、螺纹或焊接连接端口供用户选择。
End Connections - choice of flanged, threaded or socket weld ends.
连接端口-可提供法兰、螺纹或焊接连接端口供用户选择。
All valves are to be supplied with butt-weld end connections as specified.
所有截止阀按要求为对焊端连接。
The weld end is formed from Nickel and Chromium with a limited amount of additional elements.
该焊接端由镍和铬及有限量的其它元素形成。
When ordering Butt Welding End valves, specify schedule of pipe end and give complete data concerning style, figure number and contour of weld end.
在订购对焊连接阀门时，要指定管道连接端口的管壁厚度，并且提供有关类型、型号和焊接端等高线等参数。
When ordering other than standard Butt Welding end valves, specify schedule of pipe end and give complete data concerning style, figure number and contour of weld end.
如果订购其它标准的对焊连接的阀门，请告知管道管壁厚度标准，以及种类、型号和焊接端轮廓等参数。
The weld end has a coefficient of thermal expansion, which is not between the values for the coefficients of thermal expansion for the discharge end and the base electrode.
该焊接端具有一个热膨胀系数，其不在该放电端和基本电极的热膨胀系数的值之间。
More specifically, the weld end has a coefficient of thermal expansion which is greater than the coefficients of thermal expansion for the discharge end and base electrode.
更具体地，该焊接端的热膨胀系数大于该放电端和基本电极的热膨胀系数。
The positioning welding stainless steel pipe shall be smooth transition arc and weld end, can not be too high, must ensure good fusion, produce unweld, slag and other defects in case.
不锈钢管件的定位焊起弧和结尾处应圆滑过渡，焊道不能太高，必须保证熔合良好，以防产生未焊透、夹渣等缺陷。
Standard weld is autogenous weld across end (A.W.A.E.). Sanded after weld.
标准焊缝为跨端自焊缝。
The Lynas Corporation of Australia plans to open at the end of next year a large rare earths mine at Mount Weld, Australia.
澳大利亚的Lynas公司计划在明年年底在澳大利亚的芒特·威尔特开始开采一座大型稀土矿。
I decided to seek a new challenge as I could feel I was reaching the end of my enjoyment cycle with Seam and Weld.
我决定寻求新的挑战，因为我深深地感觉到自己在Seam和Weld团队中的热情即将消失殆尽。
The weld can be divided into four types: butt weld, fillet weld, plug weld and end weld.
焊缝可分为对接焊缝、角焊缝、塞焊缝和端接焊缝四种。
The next one goes two weld rings aft from the forward end of the stern section or use the measurement.
未来一，云二焊缝戒指，从尾部向前年底严峻节或使用的测量。
The fatigue resistance of the scarf weld in the end of the vessel is stronger than that of the butt weld.
其端部斜面焊缝结构的抗疲劳强度比对接焊缝结构高，且不会发生一次性脆性破坏；
Adjustable "Crater" control - Gives the operator control over welding conditions at the start and end of welds for improved weld quality.
可连续调节的收弧控制——在任何焊接条件下收弧均能获得高质量的焊缝。
Introduce an automatic welding machine for platinum & iridium spark plugs, This machine is used to weld the fine platinum & iridium wire on the ignition end of spark plugs.
介绍了一种铂、铱金火花塞自动焊接设备，该设备用于将细小的铂、铱金丝焊接在火花塞的点火端上，全自动、焊接质量稳定可靠。
This exposed end allows a short circuit to be established when it touches the work at the start of the weld.
这暴露年底允许短路时，将设立它涉及的工作开始时焊缝。
The initial position can be recognized accurately by using the method that dynamic adjust the search area in local pattern match stage in the area near the end of the weld.
在局部匹配过程中采用了动态调整搜索区域方法，并在焊缝端点附近的区域进行焊接起始点的识别及定位，从而提高了焊缝端点识别的准确性。
In the long pipeline, because the end surfaces of the welded pipes have the geometrical errors which induce the butt weld defects, the stress corrosion crack will occur.
在长输管道生产中，由于焊管管端几何形状误差而引起的对接焊缝缺陷是造成应力腐蚀断裂的主要原因之一。
The weld mechanical properties of the joint at the end of the weld were...
研究了收弧坑的接头性能，其抗拉强度和伸长率均不低于中间焊缝。
For end connection, we have threaded, hoop, butt weld, many kinds of connection style to meet customer's requirement.
阀结构上有一块式、两块式和三块式，多种末端连接满足用户的不同工矿需求。
The end flange is available in either threaded, or socket-weld styles.
目前有三种不同类型：带螺纹的，碰焊，承插焊接。
The test and analysis show that the period of frames in- crease in turn for the weld connection's, the end-plate connection's and the angle connection's steel frame respectively.
试验和理论分析表明：梁柱节点分别为焊接连接、端板连接、角钢焊接时，其结构的周期依次增大；
Due to its simply-designed controlling circuit and convenient operation, it can be used effectively in end-weld of bar steel and realize the welding of wire rod tag.
该点焊机控制电路简单，操作方便，既能用于棒材的端面又能实现线材标牌挂件的焊接。
Due to its simply-designed controlling circuit and convenient operation, it can be used effectively in end-weld of bar steel and realize the welding of wire rod tag.
该点焊机控制电路简单，操作方便，既能用于棒材的端面又能实现线材标牌挂件的焊接。
应用推荐