The causes of wear failure of the shuttle-race were analyzed.
分析了缝纫机梭床磨损失效原因。
The wear failure form of the coating is agglutination abrasion and partly rust abrasion.
锌铝合金涂层的磨损失效形式主要是粘着磨损和部分腐蚀磨损。
Ferrographytechnology is an effective tool for analysing wear failure and evaluating the...
铁谱技术是进行零件失效分析和模拟磨损试验可靠性评价的有效手段。
This paper is a companion volume of "The wear failure analysis of phosphorus cast iron cylinder".
本文是“高磷铸铁汽缸套磨损失效分析”的姊妹篇。
The creep-deformation and corrosion atmosphere accelerates wear failure course at the high temperature.
在高温下的蠕变和腐蚀气氛加快了磨损失效过程；
In view of the work conditions of Dexing Copper Mine, the analysis of the wear failure of cone crusher was made.
根据德兴铜矿工况条件，对圆锥式破碎机衬板进行了磨损失效分析。
Simulating test and vibration signal analysis for abrasive wear failure of rollings bearings have been made in this paper.
对滚动轴承磨粒磨损故障进行了模拟试验和振动信号的处理和分析。
The failure type and wear-out mechanism of the linings was analyzed based on investigation of wear failure forms of the liners.
通过考察衬板的实际工况和磨损失效形式，分析了衬板的磨损失效类型及其机理。
Wear failure refers to the relative sliding friction between the surfaces causes the surface of the metal continue to wear their work arising from the failure.
磨损失效系指表面之间的相对滑动摩擦导致其工作表面金属不断磨损而产生的失效。
The characteristic mechanisms on wear failure of metals, ceramics, polymers and composites were summarized, and wear failure behaviors of different materials were distinguished as well.
本文总结了金属、陶瓷、高分子及复合材料的磨损失效机制，以及不同材料磨损失效行为的主要区别。
The goal was to come up with a nanometal that was strong enough, hard enough and "supple" enough to resist fatigue failure and wear in advanced applications.
我们的目标是提供足够强度和硬度，又兼具足够抵御疲破坏的纳米材质，以使其能够与高级应用相借合。
Increased wear of hard disks, leading to an increased failure rate.
提高了硬盘磨损，导致了故障率增加。
If patients do experience a decreased ROM as a consequence of impingement, then subluxation and edge loading may occur, which can lead to a higher wear rate and early failure.
如果病人感觉到降低活动度是撞击的结果，然后半脱位和边缘负荷可能发生，这能导致更高的磨损率和早期的失败。
This paper presents the application of wear particle analysis to the study of the effect of a particular factor (e. g. ionitriding temperature) on bearing failure.
本文介绍了磨损粒子分析在研究特殊因素(如离子氮化温度)对轴承失效的影响中的应用。
Establish the erosive wear mechanism of drilling string in air drilling and put forward that erosion wear is a substantial cause to promote drill string failure.
初步确立了空气钻井钻柱冲蚀磨损机理，提出钻屑冲蚀是促使钻具失效的一项重要原因。
The main failure mode of spherical plain bearings is wear.
关节轴承的主要失效形式是磨损。
Wear is one of three main industrial problems, that causes the component and equipment failure.
磨损是工业上导致零件和装备失效的三个主要问题中的一个。
The nonuniform wear is a popular failure mode of separating ring of heavy vehicle clutch.
表面非均匀磨损是重载车辆主离合器分离环常见的失效形式。
The failure forms of cold work roll including contact fatigue crack, spalling, inclusion crack and wear are discussed.
讨论了冷轧工作辊接触疲劳裂纹、剥落、夹杂物裂纹和磨损等失效形式。
Rust can cause major damage such as roller bearing failure, uncontrolled wear, compression loss and blow-by.
锈病可以导致诸如滚子轴承失效，不受控制的磨损，压缩损失和打击重大损害的。
The deformation of mechanical seals would seriously affect their working performance, even resulting in wear and early stage failure.
机械密封产生变形会严重影响其工作性能，甚至导致磨损和早期失效。
Aimed at the wear problem of roll axle neck, failure analysis and rebuilding were made for multi-roller mill.
针对多辊筒碾压机压辊轴颈磨损严重的问题，对其进行了故障分析和改造。
The main failure mode were wear or tipping.
刀具的失效形式主要是磨损及崩刃。
A major limitation in our study was the variability inherent in using revision specimens for the analysis of covariate factors involved in the failure process and in the wear of the bearings.
我们研究的一个主要限制是我们都用翻修的病例来进行相关变量的分析，这些变量包括了手术的失败操作过程及磨损。
Wear is one of the main materials failure forms. The economic loss resulting from wearing is enormous and unavoidable.
磨损是材料失效的主要形式之一，因磨损造成的经济损失是非常惊人的，而且很多情况下是不可避免的。
The qualitative study mainly includes experimental researches on influencing factors of wear resistance, failure types and mechanisms of the wear of the material and contact analysis.
定性研究主要是对该材料耐磨损性能的影响因素、磨损失效形式、磨损机理进行试验研究和接触分析。
Bat a decisive factors of ring failure are the adhesive wear and fatigue wear.
而钢领失效的决定性因素是粘着磨损和疲劳磨损。
Bat a decisive factors of ring failure are the adhesive wear and fatigue wear.
而钢领失效的决定性因素是粘着磨损和疲劳磨损。
应用推荐