The result indicates that the method is effective in the fault diagnosis of piston-liner wear condition.
结果表明，该方法在活塞-缸套磨损诊断中是行之有效的。
The first kind of models can be used to on line identify the tool wear condition by using current signals.
对于第一种模型，可利用电流信号进行刀具磨损状态的在线识别；对于第二种模型，综合了时间因素的影响，可直接识别刀具磨损量。
The research has provided a feasible method for accurate diagnosis of main bearing wear condition in diesel engines.
此研究为准确诊断柴油机的主轴承磨损状态提供了可行的方法。
Under certain wear condition the wear resistance of 45 steel with medium hardness is higher than that with high hardness.
在一定磨损条件下，中硬度钢比高硬度钢耐磨。
In this paper, the possibility to diagnose the wear condition of the main moving parts of motorcycle engines is discussed.
利用振动分析技术判断摩托车发动机主要运动件磨损状况。
For this reason, the real wear condition will be deduced by studying the group characteristic of debris group in the ferrogram.
基于该理论，通过研究磨屑群的特征，就可以推测机器所处的真实磨损状态。
Therefore, using for real time and continuous monitoring of gear wear condition, OLF 1 on line ferrography is of good properties.
因而，OLF -1在线铁谱仪用于齿轮磨损状态的实时和连续监测具有良好的性能。
This paper takes the ferrography technology as a monitoring means, we use wear particle analysis to judge the wear condition of engine.
笔者利用铁谱技术作为一种监测手段，通过磨粒分析来判断发动机的磨损状态。
The wear surface morphologies were surveyed by scanning electron microscope (SEM) and wear mechanism was analyzed under the sand slurry wear condition.
运用扫描电镜观察了这几种材料在泥沙磨损条件下的磨损表面形貌，分析了它们的磨损机理。
This paper researches on the tool wear condition monitoring by cutting sound signal and workpiece surface texture based on analysis of the relative situation.
本论文在分析现状的基础上，从切削声信号和工件表面纹理这两个方面对刀具磨损状态监测技术进行了研究。
Therefore, monitoring the wear condition of mechanical facilities effectively, which is the crucial segment in improving the working performance of the equipment's.
因此，有效地监测设备的磨损状态是提高机械设备工作性能的关键环节。
Test results show that the life of ceramic ball bearing is lower than steel ball bearing under the same working condition, but the wear condition of its ring is better.
试验结果表明，在相同试验工况下，混合陶瓷球轴承的使用寿命低于全钢轴承，但是其沟道表面的磨损情况优于全钢轴承。
The wear condition of the artillery pipe is decisive to ballistic performance of the artillery and its detection is important to the using, maintenance and life evaluation.
炮管内表面的磨损对火炮的弹道学性能有决定性的影响，其磨损状态的检测对火炮的使用、维护和寿命评估也有重要作用。
It is pointed out that, moreover, combined with the other techniques of oil analysis, OLF 1 on line ferrography can monitor and diagnose gear wear condition more accurately.
本文同时指出，OLF -1在线铁谱与其它油液分析技术相结合，可以更准确地进行齿轮磨损状态的监测和诊断。
The thesis also analyses the surface wear condition of the test sample as well as the influence of different factors, providing a experimental basis to enhance the life of bearings.
并对实验结果、试件表面磨损状况以及各种因素的影响进行了分析并得出相应结论，为提高轴承的使用寿命提供了实验依据。
He added: "It has some wear and a bit of woodworm but remains in good condition and it is quite small - just as Napoleon was."
他补充道：“它有一些磨损，有几个木蛀虫，但是状况还不错，它尺寸相当小——就和拿破仑一样。”
The wear bag and box. With strong abrasive dust in the condition, the wear amount can be thought and is proportional to the concentration of dust.
滤袋和箱体的磨损。在粉尘具有强磨蚀性的状况下，其磨损量能够以为与含尘浓度成正比。
In order to avoid premature wear engine (abnormal) and maintain the best working condition, the air filter and pressure regulator PCV regular inspection and replacement is crucial.
为了避免发动机过早的磨损(非正常)和保持最佳的工作状态，对空气滤清器和压力调节阀pcv进行定期的检查和更换便显得至关重要了。
The boss needs to check whether there is a crack or brake hose aging, brake disc, brake wear, in order to ensure that the vehicle braking performance is in good condition.
老板需要检查是否有裂纹或制动软管老化，制动盘，制动磨损，为了确保车辆制动性能状况良好。
Durability refers to the ability of surfaces or vegetation to withstand wear or remain in a stable condition.
耐久性是地表或者植被抵挡损伤或保持稳定状态的能力。
After a brief introduction the importance of tool condition monitoring, the paper derived the relationship between the spindle current and tool wear theoretically.
在简单介绍监测刀具状态的重要性的基础上，文章从理论上推导了主轴电流与刀具磨损量之间的关系式。
According to the actually operation condition of the lining plate of concrete shotting machine, the wear mechanism of the lining plate has been analyzed with SEM.
从矿用锚喷机分料盘的实际工作条件出发，利用扫描电子显微镜和电子探针观察分析分料盘的磨损机理。
The wear resistance of casting composite medium manganese steel has been studied under the condition of impact abrasive wear.
研究了铸造复合中锰奥氏体钢在冲击磨料磨损条件下的耐磨性能。
Wear and scuff simulation tests, and measurement techniques, including condition monitoring.
磨损和胶合模拟实验以及测量技术，包括实验条件的监测。
The wear properties of antiwear adhesive coatings under solid particle erosion and slurry erosion condition were studied in this paper.
本文对气固冲蚀和浆体冲蚀条件下耐磨环氧胶粘涂层的磨损特性进行了研究。
Weld structure may appear flaw, wear or damage when worked under the complex and rigorous condition for a long time, which eyen lead equipments into waster.
焊接结构在复杂和苛刻的条件下长期工作会出现裂纹、磨损或损坏，严重时甚至导致设备报废。
It is expected that the wear value of automotive clutch part used in certain condition can be predicted to control the part wear and determine the reasonable maintenance and repair time.
汽车离合器在实际使用过程中，希望能预测出一定条件下工作的零件的磨损值，以便于控制零件的磨损和制订合理的维修期限。
This paper derives the condition of realizing lapping tool well distributed wear and analyzes relative affecting factors.
得出了保证磨具均匀磨损的条件，分析了有关影响因素。
This paper derives the condition of realizing lapping tool well distributed wear and analyzes relative affecting factors.
得出了保证磨具均匀磨损的条件，分析了有关影响因素。
应用推荐