This article introduced a new thermal density coefficient model, and improved refresh rules to optimize water temperature model.
本文建立了一种新的热流密度系数模型，并改进了热流密度系数刷新规则，以此来优化水冷温降模型。
GLLVHT model was applied to the simulation of temperature distribution of cooled water discharge of Jiangsu LNG project for the prediction of environmental influences.
采用GLLVHT模型对江苏LNG项目冷海水排放温度场进行模拟计算，预测其环境影响。
The influence of different covered depths, thickness of frozen wall, excavating radius, original water content and brine temperature on frost displacement are discussed for horizontal freezing model.
探讨了在水平冻结情况下覆盖厚度（埋深）、冻土壁厚度、开挖半径、含水量和盐水温度对冻胀位移的影响。
Based on the principle of soil water balance, including precipitation, temperature and other observations, this article built a model of soil drought index.
从土壤水分平衡原理出发，以降水量、温度和区域水文观测等因子为基础，建立了土壤干旱指数模型。
In this paper, we discuss the free boundary-value problem resulting from the water transpiration temperature field control model.
本文研究水发汗温度场控制模型导出的自由边界问题。
The results of model calibration and verification show that the model can reasonably respond to the changes of forcing functions for drawing quantity and temperature of water.
模型校准和检验结果表明，对于系统给定的强制函数(引水量和水温等)的改变，模型作出的状态变量的描述是合理的。
With the application of continuum theory of mixture, a mathematical model for the coupled seepage, stress and temperature for freezing and thawing of water saturated porous media has been established.
应用混合物的连续介质理论，建立了冻融过程中饱和多孔介质的渗流场、应力场和温度场耦合作用的数学模型。
At the same temperature, the same type, with the degree of starch gelatinization increased, the single layer water content decreased which is calculated by GAB and BET model.
在相同温度、相同的类型下，随着玉米淀粉糊化度的升高，分别由GAB和BET模型计算出的单层水含量降低。
A model is established to study how feed - water excursion affects the coal consumption, considering the relations between the temperature and the flux of the feed - water flowing out the heater.
建立了母管制系统给水偏移对煤耗量影响的数学模型，并考虑了加热器出口水温与给水量的关系。
The two operational modes were analyzed by the model controlled the steam inlet valve and the drain water valve based on the return water temperature.
对通过调节蒸汽进汽阀门来控制供水温度的现有运行方式和通过调节疏水阀门控制供水温度的新运行方式进行了仿真分析。
The temperature field and the contamination concentration field were Simulated. Using 2-D numerical simulation model, The effect of thermal discharge on hydrobiont water quality were predicted.
采用平面二维水流、温度场和水质数学模型对流场、温度场和浓度场进行了数值模拟，并对电厂温排水的热影响和水质影响进行预测。
The apply of the high accuracy scheme which can model the real physical process accurately has some advantages in modeling and predicting the transfer of water temperature.
高精度格式以其高度的准确性及能反映真实物理过程等优点在准确模拟及预测水温输移扩散等方面具有独特的优势。
Original plane fin model of calculation for heat dissipating capacity in low-temperature hot water floor radiation heating system was hypothesized one-dimensional temperature field in floor.
在低温热水地板辐射供暖系统的计算中，原用的平面肋片模型假设地板的温度场是一维的。
The prediction model of temperature field in the process of wearing water-cooled of angle steel was set up using ANSYS finite element analysis software.
针对角钢穿水冷却过程，借助ANSYS有限元分析软件，建立角钢穿水冷却过程温度场的预报模型；
In this paper, the mathematical model of the reltion between water saturation vapor pressure and saturated temperature is established in the form of monoacidic polynomials.
提出了一元多项式形式的水蒸气饱和压力与饱和温度关系的数学模型，进行了牛肉冻结过程的计算机模拟，在此基础上进行了牛肉冻结过程中干耗量的数值计算。
Through studying the influence of piping water on strata temperature, a continuous line-heat-resource model is proposed by using the heat resource theory.
堤坝的管涌渗漏通道可看作是一个持续作用的线热源，通过研究管涌渗漏水对地层温度的影响，利用热源法的原理建立了管涌渗漏的持续线热源模型。
Based on the theoretical analyses of water potential, a mathematical model of low-temperature vacuum drying was developed.
基于水势理论分析，建立了谷物低温真空干燥的数学模型。
It introduces the cavitation phenomenon of hydraulic turbine. The relationship between the cavitation factor and the water temperature is analyzed and it was verified by the model test results.
分析了水轮机的空化现象，推导了空化系数与试验水温的关系，并对推导结果进行了试验验证。
A numerical model for simulating the temperature field of titanium melted in induction furnace with a water cooled copper crucible has been developed by using the direct finite difference method.
利用直接差分法，建立了水冷铜坩埚感应熔炼过程温度场数值模拟计算模型。
This reaction kinetics model was used to correlate the TS-1 concentration, the content of water in solvent with the H_2O_2 conversion rate rate under different temperature.
并采用该反应动力学模型对TS- 1质量分数、溶剂中水质量分数对在不同温度下的双氧水转化速率常数进行了关联。
The calculated results of the model show good agreement with the measured ones, the temperature distribution and final microstructure of bar after water-cooling can be predicted accurately.
该模型的计算结果与实测值吻合较好，能够准确地预测棒材穿水冷却后的温度分布和最终的组织。
The utility model relates to an air-conditioning of waterscape-typed, comprising a condenser, a temperature sensor, a waterscape, a return water filter, a water pump and a frequency converter.
一种水景式空调换热系统，由冷凝器、温度传感器、水景、回水过滤器、水泵和变频器组成。
The product of temperature and moisture are unstable, so the products are strictly cold water Crystal model to preserve that use only pre-mixed solution to a dedicated capacity.
产品的温度和湿度是不稳定的，所以产品严格冷水水晶模型来保存，仅使用解决预混料专用能力。
This model took the parameters of engine speed, fuel pump rack position, pedal, LPG(injection) time, cooling water temperature and torque as the input variables.
模型将转速、油泵齿条位置、油门开度、LPG喷气时间、冷却水温度、转矩作为输入变量。
Based on certain assumptions to simplify means to mold a reasonable model, Analysised two water-seam temperature distribution characteristics by ANSYS.
基于一定的假设手段合理简化结晶器模型，用ANSYS软件分析了其中比较复杂的两种水缝温度场分布的特征。
The utility model relates to a dust removing device which is suitable for high-temperature gases which have great power amount, high water content and corrosion.
本实用新型涉及一种适用于粉尘量大，含水量高且有腐蚀性的高温气体的除尘装置。
The utility model has the advantage of fast obtaining ideal heat exchange water temperature output.
具有快速获得理想热交换水温输出的优点。
Verification with experiments shows that this model can be used to express the variation rules of soil water content, soil temperature, evapotran…
试验验证结果表明，此模型能较好地反映各种耕作处理下土壤水分的变化情况。
The utility model relates to an electronic hot-water bag used for heating in winter and constant temperature heating when the power is switched on, belonging to the practical electronic products.
一种用于通电恒温加热，冬季取暖的电子热水袋，属于实用电子产品类。
The utility model relates to an electronic hot-water bag used for heating in winter and constant temperature heating when the power is switched on, belonging to the practical electronic products.
一种用于通电恒温加热，冬季取暖的电子热水袋，属于实用电子产品类。
应用推荐