First, ZFS USES a pooled storage model instead of the traditional volume-based model.
首先，ZFS使用池存储模型，而不是传统的基于卷的模型。
Also worth mentioning is the fact that modules can be extended to be used in advanced frameworks, like model-based test frameworks and frameworks for high-volume automated testing.
另外值得提到的是这样一个事实，即模块化可以扩展以用于高级的框架中，如基于模型的测试框架和用于海量自动化测试的框架。
Based on the basic features of dynamic gas emission during boring process, a theoretical model for calculating the dynamic volume of gas emission from bore hole is set up.
基于钻孔过程中瓦斯动态涌出的基本特点，建立了钻孔瓦斯动态涌出量的理论计算模型。
Based on an analysis of the predicted volume and flow field of the smoke generated in case of fire, sets up a mathematical model and works out its numerical solution.
通过对火灾时烟气发生量及烟气流场的分析，建立了舞台空气幕计算的数学模型并求数值解。
Based on volume averaging theory, natural convection model for melting phase change in porous media was established.
根据体积平均理论，建立多孔介质中融化相变过程自然对流模型。
Based on sandstone pore throat model to study inherent regularities among sandstone throat pore diameter ratio, throat pore volume ratio and throat pore coordination number.
根据砂岩孔喉模型，研究砂岩孔喉直径、孔喉体积比、孔喉配位数之间内在的规律。
Based on the fact, a simplified drying model of heat and mass transfer is deduced from volume average theory.
对多孔介质体积平均理论进行简化，得到简化的热质传递干燥模型，用一个理论式表达模型中有效扩散系数。
The inactivation kinetics model in the constant volume heat process was then obtained and based on it, the kinetics model during .
通过实验得出了恒容热过程中酶的失活动力学模型，并在此基础上建立了浓缩过程中的失活动力学模型。
To solve the problems, this paper develops an optimum model based on random simulation method for solving volume of reservoir group flood control.
有鉴于此，以随机模拟法为基础，建立了求解防洪发电相结合的水库群防洪库容优化模型。
Through the analysis of mechanic model of spline function, the paper proposed a simple, convenient and efficient sheet assimilative method based on finite element to calculate earthwork volume.
在分析样条函数的力学模型基础上，提出了一种根据地面标高利用薄板比拟法计算土方量的简便、实用、高效的方法。
Based on the nonlinear model, the dynamic characteristic is simulated, by considering the influence of the environmental and geometrical factors, such as oil modulus, chamber volume etc.
然后，建立系统动态模型，对其动态特性进行非线性仿真研究，并就环境因素变化对系统工作特性的影响作了详细分析。
Introduced volume backup technology based on SAN and disk array in SRM and studied the backup model and backup plan of volume backup.
介绍了SRM系统中基于SAN和磁盘阵列的卷复制技术，对备份模型和备份方案进行了论述。
A simulation system for studying the electrical properties of mammalian myelinated nerve fibers was built based on a simple infinite and homogeneous volume conductor model.
为研究哺乳动物有髓神经纤维的电特性，建立了一个基于简单的无穷大、各向同性的容积导体模型的仿真系统。
A blade wall thickness inspection method based on blade cone beam volume ct image sequence and blade CAD model are given.
本文给出一种基于叶片锥束体积CT图像序列和叶片CAD模型的叶片壁厚检测方法。
A six degree of freedom (DOF) nonlinear dynamic model of the airship was presented based on the body axes coordinate system with the origin at the center of the volume.
在以体积中心为原点的机体坐标系中，建立了完整的六自由度非线性模型。
Based on the international standard ISO7546-1983, the uniform mathematical model for calculation of the loader bucket volume and its formula are presented.
在ISO7546―1983的基础上，通过建立几种不同型式铲斗容量计算的统一数学模型，推导出铲斗容量的精确计算公式。
Based on the analysing of the data, selected relevant factors, made a series of tests and amendments with models, then created forest volume estimation optimal multivariate linear regression model.
在分析数据的基础上，选择了相关遥感因子和定性因子，并通过一系列模型的检验与修正，建立了公顷蓄积量估测的最优多元线性回归模型。
Based on control volume model often used for steady state simulation and crank-connecting rod model, a torque generation model for a two-stroke diesel engine was established.
在常用于稳态仿真的容积法模型基础上，结合曲柄连杆机构的动力学模型，建立了二冲程柴油机的扭矩预测模型。
A constitutive model for foam materials is developed based on the Mixture Theories extended by the concept of volume fractions.
提出了基于混合物理论的泡沫材料连续模型的本构关系。
Based on the basic features of dynamic gas emission during boring process, a theoretical model for calculating the dynamic volume of gas emission from bore hole is set up.
在全面分析钻井机械的组成、钻进过程的特点和人的特性的基础上，建立钻机钻进过程人机系统可靠性模型。
Based on the theory of fire control volume, a forced model for analyzing the component of flow resistance in fire zone was developed.
在火灾控制体理论的基础上，建立了一个用于分析火区阻力构成的火灾控制体受力模型。
Based on the mixture theory, a mathematical model for the sedimentation of soils in the steady water is established, depending on the volume fraction of the soils.
从混合物理论出发，建立了以土体颗粒体积含量为控制变量的土体静水沉降方程。
The thesis established the flow model based on one-dimensional, unsteady, compressible, Navier-Stokes equations, and discrete the governing equations using a finite-volume formulation.
本文基于一维非稳态多分支非定常流，建立了相应的数学模型，采用有限容积法理论对方程进行数值离散分析。
Based on the compaction model of sandstone mudstone alternating beds, we advance a new formula for formation grain density, which conforms to grain volume and mass balance law.
又称催化剂真密度。表示炼油工艺流化床催化剂密度的一种方式。它是扣除了催化剂颗粒内微孔体积后的实体密度。
Based on the dynamic and stochastic characteristic of short-term traffic volume, an approach combined wavelet analysis and fuzzy Markov forecasting model is put forward.
基于短时交通量时间序列的随机波动特征，提出一种小波分析和模糊马尔柯夫结合的预测方法。
A stage by stage mathematical model of the compressor in a turbojet engine is developed based on the control volume theory.
根据控制体理论，建立了涡喷发动机中压气机的逐级数学模型。
An interactive volume rendering algorithm is presented which is based on a novel optical visualization model.
交互式体绘制算法基于一个新的可视化模型。
Based on the combination of the reliability design and optimization design, the mathematical model was created for the optimization-reliability design of the reducer to minimize its volume.
在将可靠性设计方法与优化设计方法相结合的基础上，建立减速器以体积之和为最小的可靠性优化设计的数学模型。
Based on the combination of the reliability design and optimization design, the mathematical model was created for the optimization-reliability design of the reducer to minimize its volume.
在将可靠性设计方法与优化设计方法相结合的基础上，建立减速器以体积之和为最小的可靠性优化设计的数学模型。
应用推荐