For the voltage controlled system model, pole point method is taken to design the PID controller, and good result is achieved.
对于电压控制对象模型，采用极点配置的方法设计PID控制器，均取得了较为满意的控制效果。
The stator flux is estimated by adaptive compensated voltage model, and the speed is estimated with PI adaptive method.
系统采用具有自适应补偿的电压模型估算定子磁链，PI自适应法估计转速。
This paper proposes a fault diagnosis method for grounding grid based on nonlinear nodal voltage optimization model.
提出了一种基于节点电压非线性优化模型的变电站接地网故障诊断方法。
Furthermore, a checkout method for the third harmonic voltage based protection scheme of stator ground fault in generators is presented based on the verified MLM-FEM coupled model.
进而提出了基于多回路-有限元耦合数学模型的同步发电机定子单相接地故障三次谐波电压保护方案校验方法。
Based on switch function model of TCSC and MATLAB, the digital simulation method in researching zero-crossing point characteristic of the capacitor voltage is put forward.
该文基于TCSC的开关函数模型并借助MATLAB仿真工具，提出了研究电容电压过零点特性的数字仿真方法。
A three layer series-parallel model of the Voltage Shorted Compaction (VSC) method for conductivity measurement of organic conductor was proposed.
对用于有机导体电导测量的电压端短路法(VSC)提出了一个三层的串-并联物理模型。
Due to considering the constraints of static voltage stability, the calculation amount of the built planning model is increased, so the method to speed up the calculation is discussed.
计及静态电压稳定约束导致该模型的计算量增加了，文章最后对提高该模型计算速度的方法进行了探讨。
A new calculation method for describing voltage instability coefficient based on model participation factors is proposed in this paper.
基于模式参与因子，提出一种新的电压失稳系数计算方法。
Based on the analytical solution of RSJ model with the existence of external radiation, a method for finding voltage response and RF impedance of superconducting weak links is proposed and discussed.
本文讨论用外辐射rsj模型的解析解求超导弱连接的电压响应和RF阻抗的一种方法。
A new method of mesa making model is proposed, and a new way of glass passivation technique is applied to high voltage and big current thyristor.
提出了台面造型的新方法，实现了在大台面、高电压、大电流晶闸管上采用玻璃钝化技术新的工艺途径。
The mathematical model and design method of hot wire sensors at constant voltage or constant temperature are expounded emphatically.
重点阐述了恒压和恒温工作方式下热线式传感器的数学模型和设计方法。
In order to realize the control method, the mathematical model of inductor voltage low frequency content is set up.
为了实现控制的方法，电感两端电压的低频内容的数学模型。
It is explained the mathematical model and control method of a new type of ground power supply for metro vehicles, the 3-phase voltage type of PWM rectifier.
阐述一种新型地铁地面供电电源——三相电压型PWM整流装置的数学模型及其控制方法。
A new method for calculating secondary arc current and recovery voltage on double-circuit transmission lines by twice-model transformation was proposed.
提出了利用二次模变换计算同杆双回输电线路潜供电流与恢复电压稳态值的方法。
This paper introduce in detail the principle of the calibration of resistance box by method of direct current digital voltage meter, mathematics model and the way of uncertainty evaluation.
详细介绍了用直流数字电压表法校准电阻箱的原理、数学模型及测量不确定度评定方法。
This method USES the generator model of constant voltage and the saliency of generator is included.
该方法采用发电机的恒定模型，并且考虑了发电机的暂态凸极效应。
A stator voltage space vector forecast CRPWM control method based on uncoupled arithmetic is proposed by analyzing improved induction motor mathematics model. Control strategies are presented.
根据改进的电动机模型，推导出一种基于解耦算法的定子电压空间矢量预测CRPWM控制方案，给出其控制策略。
Based on the circuit of three-phase voltage-type PWM rectifier, the mathematical model of three-phase voltage-type PWM rectifier is established. A voltage cycle control method is presented.
基于三相电压型PWM整流器主电路拓扑结构，建立了三相电压型PWM整流器的数学模型，提出一种基于电压环的控制方法。
The utility model provides an AC voltage stabilizing regulator, which synthetically utilizes the AC voltage phase control method and the amplitude control method.
本实用新型提供一种交流稳压调压器，综合利用了交流电压相位控制法和幅值控制法。
SPWM method is adopted to control the inverter model. Digital PID adjuster is used to realize voltage loop and the value modulation is used to maintain the value of output voltage.
逆变控制采用SPWM方式，由数字PID调节器实现输出电压瞬时值反馈，并采用有效值调节实现稳压。
SPWM method is adopted to control the inverter model. Digital PID adjuster is used to realize voltage loop and the value modulation is used to maintain the value of output voltage.
逆变控制采用SPWM方式，由数字PID调节器实现输出电压瞬时值反馈，并采用有效值调节实现稳压。
应用推荐