It consists of a voltage-controlled current source, a voltage-controlled voltage source and a voltage source.
该模型由一个电压控制电流源、一个电压控制电压源和一个电压源构成。
It consists of a nonlinear voltage-controlled current source, a nonlinear voltage-controlled voltage source, and capacitance.
该模型由一个非线性电压控制电流源、非线性电压控制电压源、电容构成。
Referred to the achievement of current controlled voltage source converter, the idea of current control is introduced into MC.
借鉴电流控制电压型变换器的研究成果，将电流控制的概念引入矩阵变换器。
By getting the direction function from the output AC current, the applied time of voltage vectors in one PWM period was chosen, the direction of central current was controlled for DC voltage balance.
该方法通过实时检测三相交流输出电流方向得到方向函数，利用该函数选择一个PWM周期内不同电压矢量作用时间来控制中点电流的方向，实现电压平衡。
The converter 1 is controlled as a fundamental sinusoidal current source, and the converter 2 is controlled as a voltage source.
变换器1被控制为一个基波正弦电流源，变换器2被控制为一个可控电压源。
The power subsystem of the communication facility must provide a flow of current under controlled conditions of voltage and load.
通讯设备的亚系统必须在额定的电压和电负荷下才能提供顺畅的电流。
To use the elements you should prepare the adjustable transformer or silicon controlled transformer voltage meter current meter and autocontrol temperature meter etc.
使用元件必须配备调压变压器或可控硅调压器及电压、电流表和温度自动控制仪表等。
The digital inverter is controlled by a TMS320F240 DSP chip, which applying the improved digital PI control arithmetic of the current prediction and the double control loops of voltage and current.
数字化逆变器的控制采用TMS320F 240芯片来实现，在其软件中采用了用于电流预估计的PI控制算法和电压电流的双环控制。
With the help of the sweeping velocity of magnetizing current controlled by a flux feedback loop a nearly constant induced voltage is produced.
借助磁通反馈环节控制磁化电流扫描速度，使得产生的感应电压接近常数。
The welding current, arc voltage, preset current, the period and ratio of pulse, base current, down slope time, gas pre and post flow time are sampled, calculated and controlled by microprocessor.
单片机对焊接电流、电弧电压、电流给定、脉冲周期、占空比、基值电流、收弧电流衰减时间、前气和后气时间等焊接参数进行采样、计算和控制。
Based on compensation concept, the principle of this system is analyzed by utilizing the controlled voltage source and controlled current source model of a transformer.
基于补偿原理，利用变压器的受控电压源和受控电流源模型，分析了该系统的稳压原理。
The above principle suggests that the gap flux and the voltage induced in armature winding of HSY can be controlled adequately and continuously by varying dc field current.
上述原理表明，通过改变直流励磁电流，可以连续地控制HSY的气隙磁通和绕组感应电压。
Parameter test and load discharge can process at one time. It is controlled by CPU, and can automatically test three-phase voltage, current and power ETC.
参数检测和带载放电同时进行，单片机控制，可自动检测三相电压、电流、频率等参数。
However if the active clamp flyback converter is designed to operate in CCM, and the duty cycle is controlled to make the input current track input voltage, the input power factor can be improved.
但如果设计反激有源箝位电路工作在电流连续模式，控制占空比，使输入电流跟随输入电压，可以提高输入功率因数。
After introduction of the tranlinear loop principal, the BJT current controlled conveyor has been designed by using mixed tranlinear loop voltage follower.
在引入了跨导线性原理后，利用混合跨导线性回路完成了对电压跟随器的设计，进而得到了双极管型电流控制传送器。
Using voltage controlled current source(VCCS) to create a zero is a novel scheme for frequency compensation of LDO regulators.
利用小信号压控电流源（VCCS）电路产生所需零点，是一种先进的低压降稳压器（LDO）频率补偿方法。
Pulse current, arc polarity, arc voltage and metal transfer of variable polarity pulse MIG welding are controlled by 80c196kc coordinately to implement the stable welding procedure.
单片机协调控制变极性脉冲MIG焊的脉冲电流及电弧极性、电弧电压及熔滴过渡频率，实现了稳定的焊接过程。
This paper introduced the method of the automatic measurement of DL (DY) - 20c series current (voltage) electromagnetic relay movement time and vibration time controlled by computer.
介绍了一种由微机控制的对DL、DY-20c系列电流、电压电磁继电器动作时间及抖动时间自动检测的方法。
The current distribution and the factors affecting the distribution are determined experimentally with the segmented electrode method and a computer controlled voltage measurement system.
采用微机控制的电位测量系统和组合电极实测了电流分布规律及其影响因素。
This paper describes the principle of sin voltage source and current source that can be programme controlled.
文章主要介绍程控正弦功率电压源和电流源校表仪的原理。
Conversely, if the current through an ideal current source is determined by some other voltage or current in a circuit, it is called a dependent or controlled current source.
相反，如果其他一些电压或电路中的电流通过一个理想电流源的电流决定，它被称为从属或控制的电流源。
Ultra fast low-loss controlled avalanche rectifier. Repetitive peak reverse voltage 150 V. Average forward current 2.4 A.
超快速低损耗控制雪崩整流。重复峰值反向电压150V的平均正向电流2.4A。
The gap between the electrodes can be self-adaptive controlled by detecting the voltage or the current changes during the machining duration.
加工过程中，通过数据采集卡检测电极间的加工电压变化或者回路中的电流变化，自适应控制电极间的端面间隙。
We have a lot of parameters to choose transistor, but when we use it in controlled rectification, the specified electric current and the specified voltage are the principal ones.
晶闸管的选择参数很多，但用于可控整流时，主要是额定电流、额定电压的计算与选择。
The charging technique with L-C constant-current converter is adopted, and the repeated charging and discharging process of the device is controlled by voltage feedback.
研制了一种检测氧化锌避雷器阀片的重复频率充放电装置，采用L C恒流充电技术，通过电压反馈法控制充放电运行过程。
This paper presents an novel hysteretic current controller which is used in current-controlled voltage-source-inverter.
本文提出了一种应用于电流控制电压源逆变器的新颖的电流滞环跟踪控制器。
Each module is controlled by voltage current two closed loops. The common voltage loop controls system output voltage & frequency, and generates a common reference current signal.
三台航空静止变流器模块均为电压、电流双环控制，通过公用电压调节器稳定并联系统的输出电压及频率，同时产生统一的模块电流给定信号。
Each module is controlled by voltage-current two closed-loops. The common voltage loop controls system output voltage & frequency, and generates a common reference current signal.
每台航空静止变流器模块均为电压、电流双环控制，通过公用电压调节器稳定并联系统的输出电压及频率，同时产生统一的模块电流给定信号。
The apparatus includes a digital voltage measuring circuit controllably coupled to selected ones of the voltage measurement electrodes and digitally controlled current sources.
该设备包括数字电压测量电路和数控电流源，所述数字电压测量电路可控地连接至所述多个电压测量电极中的选定电极。
According to the character of short-circuit transfer, the welding current was accurately controlled by this system, and the real welding voltage and current waveform was given.
该系统根据CO2焊短路过渡特点，对焊接电流进行较为精确的控制，并给出了该系统实际施焊时的电流电压波形。
应用推荐