The device comprises the electric vibration table, a dynamic stress measuring system and a vibration controller.
该装置包括电动振动台，动应力测量系统及振动控制仪。
The algorithm of this kind of control method and the selection method of initial vibration fuzzy controller are given.
给出了该控制方法的学习算法及初始振动模糊控制器的产生方法。
An experiment method was used to identify ARX model of the system, based on which the predictive controller was obtained to control vibration of a cantilever beam.
通过实验方法建立了系统的ARX模型，并在此基础上设计了预测控制器对结构进行振动主动控制。
In handling miscalculates hoisting need before tear down controller, and make sure that the excessive vibration without transportation.
在吊装搬运前需拆掉控制器，并确保其无过大震动而运输。
A rigid controller for the unmeasured vibration states was designed and a compensatory method for the impact on position control caused by system dynamics was given.
针对振动状态的不可测量性，应用刚性控制规律设计了控制器，给出了一种补偿系统动力学对位置控制影响的方法。
Its suspension damping force was adjust by controller in order to improve the vibration stability of vehicle.
通过控制器调整减振器阻尼力的大小，改变车身侧倾振动状态。
An adaptive controller which contains a filtered-x least mean squares algorithm(FXLMS) was applied to complete the active vibration control of a vehicle seat.
利用基于滤波X最小均方值算法的前馈型自适应控制系统，对汽车座椅振动实施主动控制，以改善座椅的动态舒适性。
DC servo system is the drive unit of vibration stimulation system. As the core of servo system, undoubtedly controller plays an important role to the whole system performance.
双电机同步直流伺服系统是颤振激励系统的驱动单元，控制器作为伺服系统的核心，对整个系统性能的优劣起着非常重要的作用。
The technical route of using fuzzy control for control of vibration cycle is put forward, and a fuzzy controller whose parameters can be optimized on line is designed.
提出了振动周期控制采用模糊控制的技术路线，设计了参数因子在线自整定的模糊控制器。
Because of the nonlinear foundation of nonlinear vibration systems, the linear controller used in nonlinear vibration active control based on traditional control theory can not work very effectively.
由于非线性振动系统的非线性本质，基于传统控制理论的线性控制器用于非线性振动控制效果不佳。
The main controller passed the electro-magnetic compatibility tests, high and low temperature tests and vibration tests and presented a normal working condition.
该主控制器通过电磁兼容测试、高低温及振动测试后，系统工作正常。
The objective of this dissertation is to design a simple and efficient active controller for vibration suppression of flexible structures.
目的是为了设计一简便有效的控制系统来抑制柔性结构的振动。
The controller is the core of the auto-compensation, which controls vibration to command accurately and makes capacitor achieve the best compensation results.
自动补偿的核心是控制器，解决控制振荡，实现准确投切，电容器才能得到最佳补偿效果。
Use controller vibration when the user is interacting with the world to increase presence.
当用户与世界交互时使用控制器振动来提高存在感。
It is shown that the self-adjustment fuzzy controller constructed in the present paper is significantly effective in the structural vibration control.
研究表明，该自调整模糊控制器设计简便，振动控制效果明显。
The active control of structural free vibration using fuzzy associative memory networks controller is studied in this paper.
本文利用模糊联想记忆神经网络作为控制器，对任意初始状态的结构自由振动进行主动控制。
The three-order spline function was employed to smooth the discrete planning positions in the robot controller with open architecture. In order to avoid the vibration in the robot tracking motion.
在开放式机器人控制器中，用三次样条函数来平滑离散规划位置，以避免跟踪运动中的振荡。
A novel control method based on BP network controller is presented for the nonlinearities in active vibration isolation system.
针对主动隔振系统存在的非线性，提出一种基于BP网络控制器的主动控制方法。
The results of the numerical simulations indicate that this controller has a good capability of adapting changing environment and a good effect on reducing the vibration of the structures.
数值仿真的结果表明，该控制系统具有适应能力强，消振迅速且效果良好的特点。
The controller designed had no vibration in general variable control, which was easy implement in engineering.
设计的控制器不仅避免了一般变结构控制中的抖振，而且具有实现简单、工程化容易的优点。
The controller can solve the vibration problem of sliding mode control system that is caused by switching delay because of the systems inertia.
针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题，将边界层法用于滑模变结构控制器的设计。
The controller can solve the vibration problem of sliding mode control system that is caused by switching delay because of the systems inertia.
针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题，将边界层法用于滑模变结构控制器的设计。
应用推荐