And the reason they didn't understand it is because the model for vibration was really simple.
他们不理解的，原因是振动模型实在很简单。
And this paper propose their vibration model.
同时又给出了它们的振动模型。
Some problems in computing automobile lateral vibration based on ordinary vehicle vibration model are analyzed in this paper.
本文论述了一般汽车振动模型在分析汽车侧向振动时存在的问题。
Theoretical analyses show that the one dimensional vibration model of a slender rod can be derived out from the theory.
理论分析表明，细长条的长度伸缩振动模式可由所述理论直接导出。
Because there are many nonlinear factors in a real automobile, a nonlinear vibration model should be necessarily used. In this case, the frequency domain methods can not be applicable.
实际汽车存在许多非线性环节，需采用非线性振动模型进行研究，在这种情况下，通常采用的频域分析方法一般不再适用。
The imaginary vibration model of transition state is studied chiefly, and points to reactant and product, and illuminates that stationary points locate the right reaction channel.
重点研究了过渡态的虚振动模式，它指向反应物和产物，说明这些驻点均位于正确的反应途径上。
The vibration model of micro robot which is driven by intelligent material and moves in liquid is the important basis to establish and study its dynamic performance.
采用智能材料驱动的、在液体中运动的微机器人的振动模型是建立和研究其动力学模型的重要基础。
Based on fuzzy theory, the relationship between the freedom degree of vehicle vibration model and the accuracy of calculation is analyzed in this paper.
运用模糊数学理论，本文分析了车辆整车振动模型自由度与计算精度之间的关系。
Based on the eight DOFs vehicle vibration model, a statistical algorithm for vehicle comfort is presented.
在八自由度整车振动模型的基础上提出了汽车舒适性的一种统计算法。
The dynamic behavior of a half coupling is described by six coefficients, and the vibration model of bearing rotor system with a gear coupling is developed.
利用六个动力系数来刻划半联轴器的力学行为，建立了轴承—转子—齿轮联轴器系统的弯扭振动力学模型。
Aimed at popular bridge in the engineering, we build a piezoelectric bridge vibration model and analyze the vibration shape and distribution of the dynamic strain.
针对工程实践中常见的桥梁问题，建立了其在自由振动下的模型，分析了其前几阶振动模态下的振形和动态应变分布。
The acceleration response in the place of booster device of projectile-fuze system under the projectile base pressure was calculated using the modified system Vibration model.
最后以弹底压力为弹引系统振动模型的输入，求解出系统引信内传爆管装置处的加速度响应。
This paper also gives the differential equation of the nonlinear vibration model, and obtains its asymptotic solution by means of singular perturbation methods.
文中给出了这一非线性振动模型的微分方程，并用奇异摄动法求得了渐近解。
Based on the vibration model and testing data, the paper provides a systematic way to not only the choice of testing parameter but also drawing the conclusion.
通过建立大型回转轴承装置的振动模型，以大量的试验数据为依据，提出了一套从试验条件与参数的选取到最后分析结论判定的系统方法。
The acceleration response at the location of the booster device of the system under the projectile base pressure is finally calculated using the modified system vibration model.
最后以弹底压力为弹引系统振动模型的输入，求解引信内传爆管装置处的加速度响应。
On the basis of cutting force model and vibration model of machine tools structure, the effect of the regenerative chatter on the stability of end milling is focused.
存得到切削力模型和机床结构振动模型的基础上，着重研究了再生型颤振对铣削加工过程稳定性的影响。
By introducing guiding effect of suspension, side-slip of tires, and the concept of effective road input, a vehicle vibration model of 15 DOFs is set up.
通过引入悬架导向作用、轮胎侧偏效应及有效路形概念，建立了15自由度整车振动模型。
The first method was loaded tooth contact analysis(LTCA), the second method was to solve nonlinear dynamics equation and the third method is to integrate torsional vibration model with LTCA.
论述了螺旋锥齿轮动力学研究的三种主要方法，即加载接触分析（LTCA）、解多维非线性方程组的方法，以及加载接触分析与周向振动模型结合的仿真分析方法。
This paper analyses the properties of the excitation and response of an engine cylinder head system and establishes the vibration model of the cylinder head system.
对内燃机缸盖系统的振动激励及表面振动信号的特性进行分析，建立了缸盖系统的振动模型。
According to Altinats's milling system vibration model, the repeatable experiment and controllable experiment were made.
根据动态铣削模型，设计颤振可重复试验和可控试验。
This paper presents a vibration model of bearing with outer race waviness and deduces the response of bearing by applying the method of analysis mechanics.
利用分析力学方法建立了外圈有波纹度的球轴承振动模型，并求出了响应。
The vibration model of ball end milling process concerning the effect of cutter flexibility is presented.
建立了考虑刀杆柔性的球头铣刀铣削振动模型；
The paper, according to the vehicle vibration model, analyses the vibration regulation of the vehicle movement to the gravamen road.
本文根据车辆振动模型，分析不平路面对车辆运行引起的振动规律。
An approach to analyze the impact response of the free standing equipment to vibration excitations is presented on the basis of the impact vibration model of rigid block.
基于刚体冲击振动模型，建立了浮放设备在振动激励条件下冲击响应分析的理论方法。
The transition states were characterized by vibration frequency analysis, with only one imaginary vibration model.
通过振动分析确定所得过渡态具有唯一虚振动频率；
Lumped parameter equivalent model is adopted in the shaft system torsional vibration model and the whole shaft system are divided into 6 parts.
轴系扭振模型采用集中参数等值模型，整个轴系分为6段。
The article introduced methods of drilling shaker dynamic measurement based on IVC, taking damping coefficient, natural frequency and vibration model as examples.
并以振动筛阻尼系数、固有频率和振型为例，介绍了基于智能控件化虚拟仪器技术的钻井振动筛动态特性检测方法。
The vibration model of ball end milling process considering the effect of cutter flexibility is presented. The influence of the axial force on the inherence frequency of the cutter is studied.
建立了考虑刀杆柔性的球头铣刀铣削振动模型，探讨了交变轴向力对刀杆固有频率的影响。
The dynamic equations of a human body and a railway vehicle are setup based on study on human body vibration model.
在人体振动模型研究基础上，建立了人体轨道车辆运动方程。
The paper analyse hazards characteristics of blasting seismic and propose blasting vibration model and the failure mechanism of masonry structure.
分析了爆破地震波的危害特征，提出砌体房屋的爆破震动破坏机理及模型。
应用推荐