If it is, the current element must have multiple definitions for the same term, and so the processor puts 3 points of vertical space after the current definition.
如果是的话，则当前元素对同一术语一定有多个定义，因此处理器在当前定义之后留出距离为3点的垂直空间。
Another common technique is to repeat the rendering of an image in the background of an element in a horizontal or vertical direction.
另一种常用技术是沿水平或垂直方向在元素的背景中重复显示图像。
A stack is a vertical stack of elements, with each element placed directly beneath the element preceding it.
一个stack是元素的一个垂直堆栈，其中每个元素直接放在前一个元素下面。
Using the Finite Element Method (FEM) and dislocation theory, we simulated the asymmetric earthquake displacement field of a vertical strike-slip fault caused by laterally inhomogeneous medium.
结合位错理论和有限单元法，对介质横向不均匀性引起的直立走滑断裂地震水平位移场不对称性进行了数值模拟研究。
Multi vertical line element model is the most widely used model in the nonlinear analysis of shear wall structures.
多垂直杆元模型是目前最为常用的一种用于剪力墙结构非线性分析的宏观模型。
This property affects the vertical positioning inside a line box of the boxes generated by an inline-level element.
该属性决定一个行内元素产生的框在一个线框内垂直方向的位置。
Plate element is used to simulate tunnel lining, road slab and vertical brace, and spring element simulate the interaction between soil and tunnel.
文中隧道衬砌、路面板和竖向支撑用板单元模拟，土与隧道的共同作用用土弹簧模拟。
Authors adopted finite element method (FEM) to study the bearing capacity of the studs of cold-formed thin-walled steel residence under vertical load.
采用有限元法对冷弯薄壁型钢住宅墙架柱在竖向荷载作用下的承载力进行了分析。
Through experimental study and finite element analysis, we draw that the vertical holes in the hollow shear wall structure with seams lessen self-weight so as to lower the earthquake action.
试验研究和有限元分析得出：此种带缝空心钢筋混凝土剪力墙结构中竖向孔洞的存在减轻了结构的自重，因而降低了结构的地震作用。
The effects of sediment on the hydrodynamic pressures acting on rigid dams during vertical ground motion were studied By use of an explicit finite element scheme in this paper.
作者应用时域显式有限元模型分析了可压缩库水条件下淤积泥砂对垂直地运动作用时刚性坝面上动压力的影响。
The vertical eigen-mode was solved by one-dimensional finite element method (FEM).
垂直特征模式用一维有限元计算。
The result shows that the computations of finite element is coincident with the test conclusion under the vertical eccentric load.
结果表明，在竖向偏心荷载作用下有限元计算结果与试验结果较为一致。
The structure of eccentric pressured moving moulding board of vertical injection press was optimally designed by using the machine design and the finite element analysis.
用机械优化设计技术和有限元分析法，对立式注射机偏心受力活动模板进行了结构优化。
Because the aerial imagery is acquired by the way of vertical photography, the banking angle is very small, almost closing to zero, and the inner element is known.
由于航空遥感影像近似竖直摄影的特性，倾斜角非常小，几乎接近于零，而且内方位元素已知。
By using the finite element method, the dynamic stress caused by vertical contact impact between bolt locking surface and barrel extension locking surface of a new rifle was studied.
采用有限元方法研究了某新型自动步枪枪机闭锁面与节套闭锁面间垂直接触碰撞的动应力。
The frame shape suspended ceiling designed according to the size of the vertical Windows on the western wall of the antechamber becomes the leading element of the antechamber.
遵循前厅西侧墙面竖窗的窗宽及窗框尺度模数延伸出了发射状的框形天花，成为了前厅的主导元素。
Gold ore bodies formed by every pulse and mantle-surge all show respective geochemical and element combination characteristics. Each mineralized trace element show regularity in vertical section.
每一次的脉动和幔涌形成的金矿体都表现了各自的地球化学特征和元素组合特征，成矿微量元素在垂向上具有各自的规律性。
As a new lateral resisting element, steel plate shear wall with vertical slits has favorable integrative benefits.
带缝钢板剪力墙作为一种新型的抗侧力构件，有着良好的综合效益。
Element geochemistry model of the primary mineralization halo is simulated by regression analysis and vertical zoning of the ore body primary halo by variable index method.
运用回归分析，模拟出原生金矿化元素地球化学模型。利用变异性指数法确定了矿体原生晕垂向分带。
Based on the three-dimensional nonlinear finite element method, the structural design is made on the vertical-tail of a plane in this paper.
基于三维有限元数值分析，对飞机的重要部件垂直尾翼进行结构设计。
Authors adopted finite element method (FEM) to study the bearing capacity of the the light steel and ordinary steel mixed wall under vertical load.
本文采用有限元法对普钢结构与轻钢结构组合的墙体在竖向荷载作用下的承载力进行了分析。
The numerical model of one-dimensional vertical water infiltration through unsaturated soils is constructed by characteristic finite element method.
建立了一维非饱和土壤水分垂向入渗的特征有限元数值模型。
This article is about the research to vertical post's pre-tightening for 600-ton full automatic tile with the method of contract finite element analysis.
利用有限元接触分析方法对600吨陶瓷全自动液压压机立柱的预紧进行了研究。
The content of element rises slightly in vertical from deep to shallow location, with a circle variation of high-low-high-low or low-high-low-high.
元素的含量在垂向上由深到浅呈现轻微的上升趋势，呈高—低—高—低或低—高—低—高波动式循环变化；
The internal force of the unsymmetrical and symmetrical double-tower connected structures which are effected by wind and vertical loads is analyzed by using ANSYS finite element.
本文运用ANSYS有限元分析软件对不对称双塔连体结构和对称双塔连体结构进行了风荷载和竖向荷载作用下的内力分析。
The characteristics of the vertical instability were discussed by experimental tests and finite element analysis.
采用试验测试和有限元分析相结合的方法对沙漏簧的垂向失稳特性进行了探讨。
Therefore, this thesis analysed the bearing behavior of super-long group piles under vertical loadings by non-linear finite element method.
因此，本文以非线性有限元分析竖直荷载作用下超长群桩承载性状。
The finite element model of HBeam rolling with and without deviation of vertical roller was established. The HBeam head displacement field and rolling force parameters were studied in detail.
利用有限元方法建立了立辊偏移前后H型钢轧制的有限元模型，研究了立辊轴线偏移时H型钢头部位移场和力能参数的变化规律。
The author built a 3D partial finite element model by ANSYS finite element analysis software to make a research on the fatigue details from 2 kinds of closed vertical ribs.
为研究两种不同闭口肋的疲劳细节，使用ANSYS有限元分析软件建立三维局部有限元模型。
The author built a 3D partial finite element model by ANSYS finite element analysis software to make a research on the fatigue details from 2 kinds of closed vertical ribs.
为研究两种不同闭口肋的疲劳细节，使用ANSYS有限元分析软件建立三维局部有限元模型。
应用推荐