The main function of the VCM is to find the VM configuration CD labeled VMCONIFG and run the configuration applications on it after system start.
VCM的主要功能是找到标签为VMCONIFG的VM配置CD，并在系统启动后运行其中的配置应用程序。
The VCM is installed in the VM template.
VCM是安装在VM模板中的。
When the deployed VM is powered on, the VCM will start and try to locate the VM configuration CD.
在启动已部署的VM 时，VCM将启动并尝试找到 VM配置CD。
Listing 2 shows how the Linux VCM finds the VM configuration CD after system start.
清单2显示了LinuxVCM在系统启动后如何查找VM配置CD。
On some drives shock sensors used for detection even light vibrations and signals from such sensors help VCM controller tune up heads movements.
在某些驱动器休克甚至光检测与震动传感器等传感器的信号用于帮助氯乙烯控制器调好头运动。
Next chip is Voice Coil Motor controller or VCM controller.
下一个芯片是音圈电机控制器或氯乙烯控制器。
The structure of inspection system on VCM based on machine vision is designed to meet the problems of dimensional inspection methods on VCM at present such as low speed, low grade precision and so on.
针对目前VCM磁钢片轮廓尺寸的检测方法存在检测速度慢、精度低等问题，设计了基于机器视觉的VCM磁钢检测系统的总体结构。
Shock sensor can detect excessive shock applied on a drive and send signal to VCM controller.
冲击传感器可以检测到驱动器上的过度冲击应用和发送信号，氯乙烯控制器。
Producing polyvinyl chloride (PVC), via vinyl chlorine monomer (VCM), is the primary end use for EDC, accounting for an estimated 95% of the world EDC consumption.
经氯乙烯单体(VCM)生产聚氯乙烯(PVC)是EDC最主要的最终用途，估计约占全球EDC消费量的95 %。
The voice coil motor (VCM) in high bandwidth actuator assembly has special voice coil construction and magnet arrangement.
该新型高带宽驱动器的音圈电机(VCM)具有独特的音圈结构和磁极(体)排列。
The model provides the basis for dynamic behavior analysis, process predictive control and optimization of VCM suspension polymerization.
此模型为氯乙烯悬浮聚合过程的动态特性分析、过程预测控制和优化提供了基础条件。
Technical development of VCM synthetic converter and several problems that should be paid attention to in its design and manufacture were introduced.
简介了我国VCM合成转化器的最新技术进展以及该设备设计制造中应注意的几个问题。
The status of VCM and acetylene gas recovery by pressure swing adsorption in vinyl chloride production units were introduced.
介绍了在氯乙烯生产装置中，采用变压吸附工艺回收精馏尾气中的VCM和乙炔气的情况。
The source of three-waste and its harness measures in the production process of VCM by petroleum process were introduced. The wastes reached the state effluent standards after harness.
介绍了石油法生产VCM过程中“三废”的来源及治理措施，通过治理，“三废”的排放达到了国家排放标准。
By comparing each other with the different process of techniques and the distinct patents of advanced techniques, the clean production of VCM was analyzed and evaluated.
通过不同生产工艺的纵向比对，及先进工艺的不同专利技术间的横向对比，对氯乙烯的生产工艺进行清洁生产的分析与评价。
VCM is still under perfecting in the Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University.
西北工业大学现代设计与集成制造技术教育部重点实验室正在进行汽车虚拟油泥造型系统的开发。
The change rule that coking yield and coke VCM increase as the coking period shortens in the commercial delayed coking unit has been calculated by the model.
应用该模型计算出工业焦化装置成焦周期缩短后，焦炭收率和焦炭挥发分增加的变化规律；
By researching the working principle of cyclone, the cause of OC type cyclone of VCM device being damaged and catalyst running off is analyzed and the improvement method is raised.
通过研究旋风分离器的分离机理，分析了VCM装置OC旋风分离器损坏及催化剂流失的原因，并提出了改进措施。
After the analysis about using theory of recovery units in VCM production process, it was pointed that energy saving, consumption decreasing and environment protection were received by recovery units.
通过对VCM生产过程中膜回收装置的使用原理的分析，指出采用膜回收装置能获得节能、降耗、环保等效果。
A method of detecting low and high boiling components contained in VCM quickly and accurately by gas chromatography and GC working station is introduced.
介绍了用气相色谱仪及色谱工作站快速、准确地检测氯乙烯单体中高、低沸物的方法。
Part 3 analyzes the traditional theory of value descending and the new theory of value ascending and emphasizes the important strategic significance of E-VCM.
第3部分分析了传统价值递减理论与新经济时代的价值递增理论，从而进一步分析了e化价值链管理的重要战略意义。
The article states the emergency shutdown and safety interlocking system to VCM plant It also introduces the structure and specialty of FSC.
文章对V CM装置采用的紧急停车系统FSC做了简述，介绍了FSC的结构特性以及应用。
Furthermore, the parameters of affecting VCM settling time are analyzed, and the optimal design of the access time and power loss is discussed.
此外，从理论上对影响音圈电机定道时间的参数进行了分析，并对音圈电机的定位时间和功耗进行了优化讨论。
The VCM content determination by turbidimetry on abnormal conditions (such as examination reparation in power cut and etc. ) was described. And the feasibility of this method was discussed.
叙述了在停电检修等异常情况时，用比浊法测氯乙烯的方法，并且对该方法的可行性进行了探讨。
The article summarizes the general situation of global market for vinyl chloride monomer (VCM), the major production technology and its research and development.
对氯乙烯(VCM)的全球市场概况、主要生产技术及其研究开发动向进行了综述。
The VCM is driven by a 16 bits D/A converter to improve the control precision.
音圈电机的驱动采用16位D/A 转换器，使音圈电机的控制精度提高。
In the production of PVC by calcium carbide method, tail gas contained VCM could be released from the rectifying process and compression-type condensation recovery process.
在电石法pvc生产装置精馏工序和压缩冷凝回收工序排放的尾气中含有VCM。
Producing PVC resin by imported VCM is an important revolution of producing process. It can improve pro duct quality, decrease environmental pollution, reduce costs.
以进口氯乙烯单体（VCM）为原料生产PVC树脂是PVC行业的重大的生产工艺变革方式，它能提高产品质量，减少环境污染，降低产品成本。
The application of antifoaming agents in the desorption of VCM in the degassing tank and the stripping tower for the production of SPVC were indicated in detail.
具体指出了消泡剂在生产SP VC 过程中于脱气槽及汽提塔内脱吸VCM方面的应用情况。
After the activated carbon adsorbing VCM from rectified tail gas, the composition of this desorbed gas was introduced.
介绍了精馏尾气经活性炭吸附氯乙烯后，解吸气体的组分。
应用推荐