According to different working conditions, rotary cylinder valve selection of different control components, can be classified as follows.
根据不同工况,旋筒阀选用不同的控制元件,可以分类如下。
Use a pressure reducing regulator or separate control valve to safely discharge gas from cylinders. Use a check valve to prevent reverse flow into the cylinder.
使用减压调整器或单个的控制阀来安全地从钢瓶中排出气体。采用止回阀,防止回流入钢瓶。
Two design strategies that three-way valve control unsymmetrical cylinder and four way valve control symmetrical cylinder were analyzed from principle and system structure aspects.
对船用舵机泵控系统中位置控制单元的三通阀控制非对称缸和四通阀控制对称缸的两种设计方案进行了理论分析和系统结构分析。
Cylinder is executing element of air pressure system. Proportional valve is the control element. A dynamic integral separated PID algorithm control press.
压力系统采用气动回路,气缸作为执行元件,比例阀为控制元件,使用动态积分分离算法闭环控制。
By regarding testing mechanics behaviors of frozen soil frost heave as the research background, a hydraulic force control system was designed on the basis of valve control asymmetric cylinder.
以测试冻土冻胀的力学行为为研究背景,设计了一套基于阀控非对称缸的液压力控制系统。
The solenoid valve cabinet receives the signal, control the movement of the cylinder to achieve air cooling, discharging and off-line cleaning, lead conversion process automation back blowing.
电磁阀接收电控柜信号,控制气缸动作,实现冷风、卸灰、离线清灰引、返吹风转换等自动化过程。
Note automatic leak control arm cylinder valve and locked balance valve.
说明内泄出自动臂缸的控制阀及锁死平衡阀。
Design of a fuzzy controller, to achieve a precise control of the hydraulic cylinder position by the high-speed on-off valve was based on PWM.
设计了一种模糊控制器,实现了PWM高速开关阀控液压缸位置系统的精确控制。
In hydraulic synchronizing lifting technology for oversize structure, computer output PWM signal as the input current of proportional valve is used to control the velocity of hydraulic cylinder.
在大型构件液压同步提升技术中,采用了计算机输出的脉宽调制信号作为电液比例流量阀的输入电流信号控制液压提升器的速度。
FHPSS consists of hydraulic pump, initiative valve, steering control unit, steering cylinder and so on.
全液压转向系统是由液压泵、优先阀、转向器、转向油缸以及相关的转向机构组成。
Double shaft servo feed system by PLC to control accurately and automatically feed of cylinder head and valve lift.
PLC控制双轴伺服进给系统,精确自动控制缸盖进给和气门升程。
The hydraulic system of injection molding machine is the representative example, it need to control cylinder speed and hold pressure, so it indeed to use pressure and flow rate multiple valve.
在注塑机液压系统中,要求能在注塑油缸运动的过程中对其进行速度控制和在保压过程中进行压力控制。 这就需要用到压力-流量复合阀来进行压力和流量的控制。
The pneumatic servo positioning system, which is composed of rodless cylinder and the servo valve, is studied on mathematical modeling and control in this paper.
本文对由伺服阀和无杆气缸组成的气动伺服位置控制系统进行了数学建模和控制研究。
TYB series waterflood pressure regulating systems consist of two cylinder four chamber pump body, electro hydraulic reversing valve, control fluid circuit and control current circuit.
TY B系列调压注水装置由双缸四腔泵体、电液换向阀、控制液路及控制电路组成。
The key technologies to lower the exhaust emission, included the in-cylinder control, exhaust gas recirculation, variable geometry turbo, 4-valve, common rail and after-treatment are presented.
阐述了降低排放的关键技术,包括缸内控制、废气再循环、可变涡轮增压、4气阀、共轨和排气后处理技术。
The pneumatic control circuit, which is consisted of the pressure regulator component, the direction valve and the cylinder, is the most commonly used circuit in the industrial automation.
气动自动化系统是实现传动与控制的主要方式之一,其中由稳压元件、换向阀和气缸等所组成的气动控制回路更是工业自动化中常用的回路。
The cylinder drives a piston extraction and play materials, and by the one-way valve to control the flow of materials, the magnetic switch control cylinder stroke, which adjust the filling volume.
通过气缸带动一个活塞抽取和打出物料,并由单向阀控制物料流向,由磁环开关控制气缸行程,即调节灌装量。
The former is the process of inhalation and discharged at the same pump cylinder alternately conducted by the inhalation valve and exhaust valve control;
前者的吸入和排出过程在同一泵缸内交替进行,并由吸入阀和排出阀加以控制;
A turbine supercharger protector is provided, which comprises an oil cylinder body 11, an oil cylinder cover 12, a piston 2, a single filling valve 3 and a piston control device.
一种涡轮增压器保护装置,它包括油缸体11、油缸盖12、活塞2、单向进油阀3和活塞控制装置;
The friction mechanism of the valve-controlled cylinder system and the adverse effect of friction on the system control performance were analyzed.
针对阀控缸系统的摩擦力对系统控制性能造成的不良影响,提出了一种新的减小摩擦力影响的补偿方法。
A control valve, the valve position of which is controlled by the pressure on the slave cylinder side of the pump, is arranged parallel to the pump.
与该泵并联地设置有一个控制阀,该控制阀的阀位置通过该泵的主动缸侧的压力来控制。
One way flow controll valve is widely used for adjusting cylinder speed. It is an integual control valve formed up by a one way vale and a controll valve.
单向节流阀是一种广泛用于调节气缸运行速度的阀,它是单向阀和节流阀并联而成的组合式控制阀。
In pneumatic position servo system with proportional directional control valve and control cylinder, the centre adjust emt voltage is one of the important factors that influence control precision.
在比例方向阀控缸气动位置伺服系统中,置中电压是影响控制精度的重要因素之一。
This paper puts forward a new self-organizing fuzzy control buffering-positioning scheme, and achieves proportional valve-cylinder buffering-posioning system controlled by one chip microcomputer.
针对液压机械手油缸缓冲与定位之间存在的矛盾,提出了一种新型的自组织模糊控制缓冲定位方案。 设计实现了用单片机控制的比例阀—缸缓冲定位系统。
Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
机架上装有上下两个限位开关,以控制换向阀改变切胶刀的运动方向,同时,也可保护活塞缸缸盖。
Use a pressure reducing regulator or separate control valve to safely discharge gas from cylinder.
使用减压调整器或单个的控制阀来安全地从钢瓶中排出气体。采用止回阀,防止回流入钢瓶。
Use a pressure reducing regulator or separate control valve to safely discharge gas from cylinder.
使用减压调整器或单个的控制阀来安全地从钢瓶中排出气体。采用止回阀,防止回流入钢瓶。
应用推荐