Die cast zinc alloy valve body.
锌合金压铸阀体。
Lightweight magnesium alloy valve body.
轻巧的镁合金阀体。
Remove the body bolts from the valve body.
从阀体上拆卸阀体螺栓。
An O-ring seals the relief valve body to the main housing.
用一个O形环密封安全阀阀体与主外壳。
Leave the CAM assembly clapper parallel to the valve body.
使得凸轮总成阀瓣平行于阀体。
Inlet and outlet ends are located at two ends of valve body.
进口端与出口端分别位于阀体的两端。
Thoroughly clean all inside surfaces of the relief valve body.
彻底清洗安全阀阀体的所有内部表面。
Valve body and internal parts: anodized aluminum alloy, copper.
阀体和内部零件：阳极电镀铝合金、铜。加固端盖：塑料。
Beneath the hand wheel are two nuts attached to the valve body.
在手轮下面是两个附在阀体上的螺母。
Vent the piping and test valve body cavity to remove air or steam.
排放管道和试验阀门体腔内的空气或蒸汽。
These valves contain two coils and one valve body and spool assembly.
这些阀门包含两个线圈、一个阀体和阀芯总成。
Install with the arrow on valve body pointing in the direction of flow.
安装时要使阀体箭头指向水流方向。
Slide one half of the splash guard into the groove on the relief valve body.
将防溅保护的一半滑动到安全阀阀体的沟槽上。
Check modules are installed in the valve body with the seats facing the valve inlet.
安装在阀门内的止回模块其阀座应该面对阀门进口。
The valve seat of the integrative type, the valve body, valve seat connection question exist.
一体式的阀座，不存在阀体、阀座连接问题。
Valve body and internal parts: anodized aluminum alloy, copper. Reinforcement Cover: Plastic.
阀体和内部零件：阳极电镀铝合金、铜。加固端盖：塑料。
The upper set of wrench flats belong to the packing nut, which is threaded into the valve body.
扳手面上面的那个属于衬垫螺母，它是通过螺纹旋进阀体的。
The check valves shall be modular and shall seal to the main valve body by the use of an O-ring.
这种止回阀应该是模块化的，并且应该采用一个O形环密封在主阀体上。
It was concluded that brittle fracture of the valve body was the result of poor casting quality.
结果表明，该阀体爆裂属脆性断裂，爆裂系截止阀材质、组织及铸造质量差所致。
Valve body shall be drilled and tapped for a pressure connection on top and bottom of the housing.
阀体应该钻孔和攻丝用于在顶部和底部外壳的压力连接。
What usually happens is that the spring corrodes to the stem and valve body and becomes immovable.
通常发生的是弹簧同阀杆和阀体腐蚀在一起，变得无法移动。
Diaphragm valve body flow smoothly, cutting components for the elastic diaphragm, valve cover stuffing.
隔膜阀体流通平滑、节流元件为弹性隔膜阀，阀盖上无填料函。
Sealing tightness is ensured by the compression of the sealing rings against the piston and valve body.
受压的密封环紧紧贴住旋塞和阀体，确保密封的严密。
Is suitable for through flange valve sealing pressure and valve body intensity pressure performance test.
适用于直通法兰式阀门的密封压力和阀体强度压力性能试验。
Apply heat with flame directed away from the center of the valve body. Excessive heat can harm the seats.
在用明火加热时不要直接施加在阀体中心上。过热可能损害阀座。
Introduces the structure, characteristics and mechanical machining methods for T-type Sodium globe valve body.
介绍了T形钠截止阀阀体的结构、特点及机械加工方法。
Pay attention to the flow direction of medium and install the valve referring to the indicating arrow on the valve body.
安装时请认清介质流向并按阀体上指示箭头方位正确安装。
The valve body expansion pipe is only used to open or close the valve, but can not replace the expansion pipe in the pipe.
阀体伸缩器只作用于方便阀门本身的启闭，不能代替管道中应设有的伸缩器。
The valve body expansion pipe is only used to open or close the valve, but can not replace the expansion pipe in the pipe.
阀体伸缩器只作用于方便阀门本身的启闭，不能代替管道中应设有的伸缩器。
应用推荐