The formulas of the UV cured varnish were optimized and could be used as the painting of both natural and artificial leather.
所研制的UV固化皮革上光油完全达到真皮革和人造革的涂饰要求。
UV board paint thick, high hardness, abrasion, acid and alkali resistance, salt spray, impact resistant, UV cured paint has some antibacterial effects.
UV板漆面厚、硬度高，耐磨、耐酸碱、耐盐雾、耐碰撞，UV漆固化后具有一定的抗菌效果。
This paper narrates the characteristics of UV cured materials and research status of photo-initiators, focusing on research progress of the application of UV cured coatings.
介绍了紫外光固化材料的特点和光引发剂的研究现状。主要综述了其应用在紫外光固化涂料的研究进展。
The UV-cured ink has a similar hardness to automotive paint, and a final coat of matte or semi-gloss acrylic further protects the colored surface.
所用的防紫外线的油漆与汽车喷漆的硬度相当，最外面一层是不光滑或者说是半抛光丙乙烯材质外壳提供了进一步的保护。
The thermal degradation process of the Varnish film cured by UV radiation was analyzed with TG method in air atmosphere.
用热重法（TG）分析了紫外光辐射固化漆膜在空气气氛下热失重的过程。
The title UV curing coatings is prepared based on epoxy acrylate, reactive diluents and photoinitiator. The main raw materials and cured film are tested with TGA.
以环氧丙烯酸酯、活性稀释单体、光引发剂等为原料，制备UV固化涂层，对主要原料及固化后的涂层进行了热失质量分析。
If the spin coating method is used, a UV-resin is spun on top of the metal film and cured by UV-exposure.
若使用旋涂法，就是在金属膜的上面旋涂一层UV树脂并用UV固化。
UV curable polyurethane acrylates (UVPUA) were prepared, and the synthesis process and cured films were monitored by Fourier Transform Infrared (FTIR).
合成了可uv固化的聚氨酯丙烯酸酯，并利用傅立叶红外光谱对其合成过程及固化涂膜进行了表征。
In this dissertation, a research has been made on the Ultraviolet (UV) cured colored paints and visible light cured varnishes of PUA.
本文主要研究了聚氨酯丙烯酸酯的紫外光固化色漆和可见光固化清漆的制备、涂布、固化及固化后的漆膜综合性能。
These coatings may be cured via chemical means, thermally, or by exposure to UV or electron beam radiation.
这些涂料可以通过化学方法固化、热固化或通过暴露到UV或电子束辐射下固化。
The oligomers, monomers and photoinitiators used in UV cationic cured, hybrid cured and application of additives and resin modified UV curable coating are described.
描述了U v阳离子固化、混杂固化用齐聚物、单体和光引发剂的作用，以及UV光固化涂料用助剂和改性树脂的应用。展望了UV光固化涂料的国内外市场发展前景。
Introduces the synthesis of a UV-cured oligomer and its application in three coatings, and discusses its various characteristics of oligomer in coatings.
介绍了一种紫外光固化齐聚物的合成以及在三种涂料中的应用，讨论了齐聚物在涂料中的各种特性。
Surface loss of colour and gloss in a coating from degradation of the binder by the UV components in sunlight. Can be seen as a white deposit on the cured coating surface.
在阳光下曝晒由于UV的作用使得结合料降解，从而使涂层表面的颜色、光泽发生损失，可以看到在固化涂层的表面出现白色物质。
It was demonstrated that a no-crack integrated cured film could be obtained via UV curing technique.
通过紫外光固化技术能够制备无干裂的完整薄膜。
The ultraviolet-cured epoxy-acrylate/montmorillonite(EA/MMT) hybrid was synthesized by intercalation polymerization, and prepared into a novel nanocomposite material via UV-curing process.
利用插层聚合合成了环氧丙烯酸酯/蒙脱土复合光固化树脂，并采用紫外光固化制备了环氧丙烯酸酯/蒙脱土纳米复合材料。
There are a few varieties in nanoimprint, which can be loosely divided into hot embossing, UV-cured imprinting, and micro-contact printing.
纳米压印光刻技术主要包括热压印、紫外固化压印和微接触法压印。
A traditional UV-cured urethane coating covers the surface of the wood floor and is dried instantly, making the surface much flatter.
传统的UV涂料覆盖于实木地板的表面，并立即进行干燥，使表面更平坦。
UV-cured films of the said two kinds of PUA resins have good water resistance, solvent resistance and acid resistance, but strong base resistance thereof is on general level.
上述水性光固化树脂固化膜具有良好的耐水、耐溶剂和耐酸性，但耐强碱性一般。
The maximum UV absorption wavelength of polymerizable photoinitiator shifted toward long wavelength, and the residues of light-cured were far less than benzophenone.
可聚合光引发剂的最大紫外吸收波长均发生红移，光固化残留量远远小于二苯甲酮。
Rising demand for UV-cured powder coatings from the furniture industry for use in medium-density fiberboard (MDF) applications is propelling market growth.
全球紫外线 （UV） 硬化型粉末涂料的市场，由于家具产业上MDF （中密度纤维板）需求的增加，整体有扩大趋势。
Rising demand for UV-cured powder coatings from the furniture industry for use in medium-density fiberboard (MDF) applications is propelling market growth.
全球紫外线 （UV） 硬化型粉末涂料的市场，由于家具产业上MDF （中密度纤维板）需求的增加，整体有扩大趋势。
应用推荐